Stuart High speed engines

Stuart High speed engines

This topic has 5 replies, 4 voices, and was last updated 29 December 2021 at 18:10 by Former Member.

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
29 December 2021 at 16:47 #28489
Former Member
Participant
@formermember12892
Stuart High speed engines
Advert

29 December 2021 at 16:47 #577322
Former Member
Participant
@formermember12892
[This posting has been removed]
29 December 2021 at 16:55 #577324
noel shelley
Participant
@noelshelley55608
Didn't know they did 3 sizes but had seen a sirius engine/dynamo – beautiful set up in a tin box and Old Glory mag did an article on the whole setup including the alumium boiler a number of years ago ! Noel.!
29 December 2021 at 17:25 #577335
DiogenesII
Participant
@diogenesii
Yes, nice to see all three lined up for comparison, thanks for taking the trouble..
29 December 2021 at 17:38 #577339
Nigel Graham 2
Participant
@nigelgraham2
I recall quite a long time ago the first Stuart Turner engine I saw.

This was a Sirius and dynamo, without boiler though, in the Resistance Museum in Oslo.
29 December 2021 at 18:10 #577350
Former Member
Participant
@formermember12892
[This posting has been removed]
Author

Posts

Viewing 6 posts - 1 through 6 (of 6 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- LAzar egde finder
  Started by: ian Holdsworth in: Beginners questions
- 12
- 17
- 13 November 2026 at 20:42
  Fulmen
- Air Conditioning portable unit
  Started by: BOB BLACKSHAW 1 in: The Tea Room
- 4
- 6
- 13 November 2026 at 19:00
  mark costello 1
- What Did You Do Today 2026 1 2 … 10 11
  Started by: JasonB in: The Tea Room
- 56
- 255
- 13 November 2026 at 18:22
  Nigel Graham 2
- Hello everyone
  Started by: point.two.five in: Introduce Yourself – New members start here!
- 6
- 12
- 13 November 2026 at 18:03
  point.two.five
- injector pipe size
  Started by: Garry Coles in: General Questions
- 3
- 3
- 13 November 2026 at 17:32
  Nigel Graham 2
- Myford
  Started by: Michael Gilligan in: Manual machine tools
- 9
- 15
- 13 November 2026 at 16:48
  Nicholas Farr
- Parting off 1 2 3
  Started by: Peter Simpson 3 in: Beginners questions
- 23
- 53
- 13 November 2026 at 15:37
  Geoff Dunsby
- Mitotoyo dial caliper battery or innards.
  Started by: Clive Farrar in: General Questions
- 14
- 19
- 13 November 2026 at 14:16
  bernard towers
- Help Clarke CL430 Lathe feed coupling 1 2
  Started by: daz996 in: Beginners questions
- 12
- 30
- 13 November 2026 at 11:36
  5sahib
- Micrometer ratchets 1 2
  Started by: Graeme Seed in: Workshop Tools and Tooling
- 16
- 30
- 13 November 2026 at 06:47
  Speedy Builder5
- Dopiest question ever…how to use a bin?
  Started by: Ian Parkin in: The Tea Room
- 8
- 14
- 12 November 2026 at 23:04
  not done it yet
- Greenbat 3 ton battery loco
  Started by: Pippin in: Work In Progress and completed items
- 3
- 5
- 12 November 2026 at 17:25
  renardiere7
- Brake shoe castings and forming a lip in sheet steel
  Started by: Pippin in: Help and Assistance! (Offered or Wanted)
- 3
- 3
- 12 November 2026 at 12:20
  bernard towers
- Annoying advert 1 2
  Started by: Dalboy in: The Tea Room
- 20
- 34
- 12 November 2026 at 10:57
  JasonB
- Coventry Diehead CH Reassembly
  Started by: Tony Ray in: Workshop Tools and Tooling
- 4
- 14
- 12 November 2026 at 08:16
  Jan Raap
- Impact Bits
  Started by: Vic in: Workshop Tools and Tooling
- 5
- 7
- 11 November 2026 at 18:31
  old mart
- Close-coupled Tees (Underfloor heating)
  Started by: Andy Stopford in: The Tea Room
- 7
- 16
- 11 November 2026 at 17:07
  Andy Stopford
- 3d Printed Carriage Stop for Warco WM180 1 2
  Started by: James A in: Workshop Tools and Tooling
- 13
- 26
- 11 November 2026 at 14:55
  JasonB
- Kirimoto CAM
  Started by: Geoff Dunsby in: CAD – Technical drawing & design
- 3
- 14
- 11 November 2026 at 09:28
  JasonB
- Onshape Learning
  Started by: BOB BLACKSHAW 1 in: CAD – Technical drawing & design
- 6
- 18
- 10 November 2026 at 17:23
  BOB BLACKSHAW 1
- My adventures with a bench top CNC mill 1 2 3 4
  Started by: John Hinkley in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 10
- 84
- 10 November 2026 at 12:07
  John Hinkley
- Straining the old grey matter!
  Started by: Geoff Dunsby in: Introduce Yourself – New members start here!
- 6
- 10
- 10 November 2026 at 10:42
  Geoff Dunsby
- Hello! …and help
  Started by: sbruce886 in: Introduce Yourself – New members start here!
- 5
- 8
- 10 November 2026 at 09:48
  noel shelley
- New Mystery Lathe 1 2
  Started by: mart7mcfl7 in: Manual machine tools
- 9
- 27
- 10 November 2026 at 07:35
  JasonB
- Pendulum Rod Weight Tray
  Started by: John Purdy in: Clocks and Scientific Instruments
- 4
- 15
- 10 November 2026 at 00:29
  duncan webster 1

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

November 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies