projects

[John McCallum 1Participant @johnmccallum1]

At the age of 74 i have just purchased my first lathe, one of China's finest!. Seeing some of the excellent work on here, my efforts look pretty basic. My interest is in fishing and especially Centre Pin reels. I had a damaged 90 year old wooden reel and I have now turned it into a Composite reel and I am quite pleased with the result. I'm now looking for some simple projects to increase my level of skill on the lathe. Can you tell me where I might find some ideas?

PS I tried to put some photos on of the reel but don't understand how to do it

Regards John

Edited By John McCallum 1 on 19/01/2020 13:03:02

[John McCallum 1Participant @johnmccallum1]

[Brian HParticipant @brianh50089]

Hello John, pictures are a bit complicated! You have to make an album and then copy pictures into it from your PC.

Then you can add pictures to your posts from your album.

You can have more than one album to keep different subjects separate.

You will find Albums on the black banner at the top of the page.

Best of luck.

Regards, Brian

John, you beat me to it!

Edited By Brian H on 19/01/2020 13:05:00

[Neil WyattModerator @neilwyatt]

NIce work John, welcome to the forum.

Neil

[John McCallum 1Participant @johnmccallum1]

Thank you Neil.I really enjoyed your book on the Lathe. Very helpful

Regards

John

[Paul AinsworthParticipant @paulainsworth93685]

I like that, looks great.

[John McCallum 1Participant @johnmccallum1]

Thanks Paul

[John HaineParticipant @johnhaine32865]

Some nice projects in Guy Lautard's Machinist's Reader (3 volumes).

Turner's Cube?

[John McCallum 1Participant @johnmccallum1]

Thanks for the info John, but looking at the price of the 3 volumes, at my age I really don’t want another mortgage

Regards John

[Former MemberParticipant @formermember19781]

[This posting has been removed]

[John McCallum 1Participant @johnmccallum1]

Hello Bill,

The Progress looks very interesting ,as do the Elmers engine. I have sent off for the Stuart catalogue.

A simple, with the emphasis on simple, tool grinder would be of interest.

Regards John

[Former MemberParticipant @formermember19781]

[This posting has been removed]

[John McCallum 1Participant @johnmccallum1]

Hello Bill,

On the bay of evil I have bought both TC’s books

When they arrive, plus the Stuart catalogue hopefully I’ll be able to choose a project

Thank you for your help

John

[Bob Unitt 1Participant @bobunitt1]

Hi John, for a simple tool grinder you might want to consider building a Worden Mk 3 I built one a few years ago. An excellent machine, and a good way of learning small-scalle engineering.

[Howard LewisParticipant @howardlewis46836]

Bob U beat me to it!

I was going to suggest a Worden. Fairly straightforward turning, some simple fitting work to tidy up rough edges. Add a few embellishments of your own, such as pretty chamfered washers and so on, and with a few accessories, (Hemingway, or your own design )you have a really useful machine to keep your cutting tools in good shape.

Go for it!

Howard

[John McCallum 1Participant @johnmccallum1]

Bob and Howard,

Yes, I like the idea of the Worden but I think i'll cut my teeth on a tool grinder by Richard Rex first.

Now I need to buy a small mill

Regards to you both

John

[Author]

Posts