The world of model and hobby engineering
Forums
Help
Register
Log in
Home › Forums › Materials › Polycraft Polyfoam Rigid 145
Does any ‘participant’ have actual experience of using this specific product ?
https://www.mbfg.co.uk/polycraft-polyfoam-rigid-145.html
.
If so, I have a question for you … which the supplier was unable to answer.
If not, please ignore this post.
Thanks
MichaelG
It also goes by the name of Biscuit Foam should you want to seek an alternative supplier. Warm the mould and the resin and mix by shaking although the latter is not essential.
https://www.mouldlife.net/procell-rf9–1119-p.asp
Thanks for that, Chris
… I have already purchased the material, but not yet had the opportunity to use it.
There is some serious planning required before I risk using it, because there will probably only be one chance to get it right.
MichaelG.
Home › Forums › Materials › Topics
Started by: Tim Sallows in: Workshop Tools and Tooling
Chris12
Started by: Nigel Graham 2 in: CAD – Technical drawing & design
Nigel Graham 2
Started by: Martin King 2 in: Help and Assistance! (Offered or Wanted)
robt
Started by: old fool in: The Tea Room
noel shelley
Started by: Clive B in: Workshop Tools and Tooling
Started by: nickbgood25 in: Introduce Yourself – New members start here!
Started by: Michael Callaghan in: Locomotives
Michael Callaghan
Started by: mccormackclockrepairs in: Introduce Yourself – New members start here!
mccormackclockrepairs
Started by: Roderick Jenkins in: Help and Assistance! (Offered or Wanted)
Roderick Jenkins
Started by: Peter Cook 6 in: Workshop Tools and Tooling
Peter Cook 6
Started by: ell81 in: General Questions
ell81
Started by: Chris12 in: General Questions
Started by: Alistair Robertson 1 in: The Tea Room
old fool
Started by: 1957jmh in: Workshop Tools and Tooling
1957jmh
Started by: Dell in: The Tea Room
Started by: Speedy Builder5 in: The Tea Room
larry phelan 1
Started by: Blue Heeler in: Stationary engines
JasonB
Started by: iansoady in: Materials
iansoady
Started by: Danni Burns in: Workshop Tools and Tooling
tomread12
Started by: zytoooh in: General Questions
Started by: Nigel Graham 2 in: Workshop Tools and Tooling
Started by: PutneyChap in: Manual machine tools
Mark Hall
Started by: inline in: Manual machine tools
ryan.carter848
Started by: petro1head in: General Questions
Started by: Andy Freeman 1 in: Clocks and Scientific Instruments
bernard towers
View full reply list.