Cringle model engineering

Cringle model engineering

This topic has 3 replies, 3 voices, and was last updated 14 February 2021 at 21:50 by David George 1.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
14 February 2021 at 21:04 #10692
Richard Miller 1
Participant
@richardmiller1
Boilers
Advert

14 February 2021 at 21:05 #527337
Richard Miller 1
Participant
@richardmiller1
Hi Has anyone built or brought one of their boilers ? are they suitable for a beginner ?

Is there any other relatively cheap boilers to use on simple wobblers etc?

Richard
14 February 2021 at 21:39 #527344
Nick Clarke 3
Participant
@nickclarke3
No experience of Cringle but do you have access to silver soldering equipment?

If so there are other boiler kits available from various sources Reeves2000 and GLR Kennions to name but two.
14 February 2021 at 21:50 #527346
David George 1
Participant
@davidgeorge1
Have a look at this web site I built it last year.

http://www.steves-workshop.co.uk/modelboats/steamlaunch/boilerbuild/simpleboilerconstruction.html

David
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Octopus Heat Pump 1 2
  Started by: Michael Gilligan in: The Tea Room
- 15
- 38
- 12 September 2026 at 23:16
  Mark Rand
- Source of milling cutters post Arceurotradw
  Started by: Mike Crossfield in: Workshop Tools and Tooling
- 2
- 2
- 12 September 2026 at 22:24
  Baz
- Steam Traction World in administration
  Started by: Baldric in: The Tea Room
- 13
- 21
- 12 September 2026 at 21:28
  Nigel Graham 2
- LG Smart TVs
  Started by: Michael Gilligan in: The Tea Room
- 10
- 12
- 12 September 2026 at 21:17
  Nigel Graham 2
- Model Engineer & Workshop 1 2
  Started by: Tony Watson 3 in: Model Engineer & Workshop
- 18
- 30
- 12 September 2026 at 20:44
  duncan webster 1
- Have I got 12-28 UNF wrong or has Völkel?
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 4
- 6
- 12 September 2026 at 19:25
  Bazyle
- Seig sx2p mill
  Started by: BOB BLACKSHAW 1 in: Manual machine tools
- 2
- 2
- 12 September 2026 at 17:43
  Ches Green UK
- Oilstones / Waterstones
  Started by: Grindstone Cowboy in: General Questions
- 7
- 14
- 12 September 2026 at 16:57
  Grindstone Cowboy
- Parting off 1 2 3
  Started by: Peter Simpson 3 in: Beginners questions
- 22
- 51
- 12 September 2026 at 16:49
  Mick B1
- My week this week! My workshop videos 1 2 … 13 14
  Started by: Phil Whitley in: The Tea Room
- 16
- 331
- 12 September 2026 at 15:17
  Phil Whitley
- End mill sharpening
  Started by: petro1head in: General Questions
- 13
- 21
- 12 September 2026 at 13:02
  Martin Johnson 1
- Inappropriate adverts on the site
  Started by: Joseph Noci 1 in: Website Questions, Comments, and Suggestions
- 16
- 23
- 12 September 2026 at 12:28
  bernard towers
- Question about GHT’s retracting topslide drawing 1 2
  Started by: ega in: Workshop Tools and Tooling
- 8
- 26
- 12 September 2026 at 10:33
  Graham Meek
- What Did You Do Today 2026 1 2 … 7 8
  Started by: JasonB in: The Tea Room
- 47
- 177
- 12 September 2026 at 10:30
  IanT
- How much !?! 1 2
  Started by: Michael Gilligan in: Workshop Tools and Tooling
- 17
- 29
- 12 September 2026 at 08:36
  bernard towers
- Collet Identification Please?
  Started by: Nigel Graham 2 in: Manual machine tools
- 5
- 8
- 11 September 2026 at 21:29
  Michael Gilligan
- Preview of whats coming in Freecad 26.3
  Started by: Russell Eberhardt in: CAD – Technical drawing & design
- 2
- 6
- 11 September 2026 at 20:13
  Russell Eberhardt
- Claude et al
  Started by: Michael Gilligan in: The Tea Room
- 3
- 3
- 11 September 2026 at 10:46
  Fulmen
- WARNING: Phishing Attempt on MMEE Bookings?
  Started by: Nigel Graham 2 in: Exhibitions, Shows and Club Events
- 2
- 2
- 11 September 2026 at 09:13
  Meridienne Exhibitions 1
- Inserting An Angled Feature (Alibre Atom) 1 2
  Started by: Nigel Graham 2 in: CAD – Technical drawing & design
- 4
- 32
- 10 September 2026 at 11:13
  Nigel Graham 2
- Reaming drill sizs 1 2 3
  Started by: Steve Huckins in: Beginners questions
- 23
- 55
- 10 September 2026 at 11:04
  Howard Lewis
- Article about Steam Luanches
  Started by: dbs88 in: Model Engineer.
- 7
- 17
- 10 September 2026 at 08:45
  dbs88
- Mystery engine
  Started by: David Ambrose in: Model Engineer.
- 3
- 6
- 10 September 2026 at 06:47
  JasonB
- opposed twin i/c engine
  Started by: bricky in: Help and Assistance! (Offered or Wanted)
- 2
- 3
- 9 September 2026 at 23:01
  bricky
- Final diameter fo cutting teeth
  Started by: Dalboy in: General Questions
- 3
- 9
- 9 September 2026 at 17:57
  Dalboy

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

September 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies