The world of model and hobby engineering
Forums
Help
Register
Log in
Home › Forums › Help and Assistance! (Offered or Wanted) › back issues 4440 and 4438
any one any solution, I cant access back issue 4440 and 4438, the fonrt page opens and it just hangs up.
john
cant access
Have to leave that one to Neil as I get the same problem either via this website or via the back door method.
J
4438 is working
4438 & 4439 both OK.
I know some servers were down for the weekend, no idea if these affect back issues. Can you try again tomorrow and if it still falls over let me know.
Neil
4440 still not working, also affecting the Chester catalogue on the home page.
Ok, I've emailed Katy.
Yes, the back issues were transferred to a new server, it seems like a couple of files may have been corrupted/missed.
Sam is looking into it.
Home › Forums › Help and Assistance! (Offered or Wanted) › Topics
Started by: John Holloway in: General Questions
JasonB
Started by: BOB BLACKSHAW 1 in: CAD – Technical drawing & design
BOB BLACKSHAW 1
Started by: Niels Abildgaard in: Manual machine tools
Niels Abildgaard
Started by: aytact in: Manual machine tools
AStroud
Started by: Clive Farrar in: General Questions
Hollowpoint
Started by: JasonB in: The Tea Room
Andrew Crow
Started by: YouraT in: Manual machine tools
YouraT
Started by: BOB BLACKSHAW 1 in: 3D Printers and 3D Printing
Started by: Paul Lousick in: CAD – Technical drawing & design
Started by: Graeme Seed in: Workshop Tools and Tooling
Pete
Started by: starjump in: Beginners questions
southernchap
Started by: gerry madden in: Manual machine tools
Macolm
Started by: Bo’sun in: Workshop Tools and Tooling
Started by: blowlamp in: CAD – Technical drawing & design
Andy Stopford
Started by: iacooper in: Clocks and Scientific Instruments
iacooper
Started by: Roy Birch in: Locomotives
Roy Birch
Started by: JohnF in: Workshop Tools and Tooling
Started by: Captain Barnacles in: Workshop Tools and Tooling
Michael Gilligan
Started by: John Purdy in: Clocks and Scientific Instruments
peter1972
Started by: Turbine Guy in: Stationary engines
Turbine Guy
Started by: Vic in: Workshop Tools and Tooling
Georgineer
Started by: Ramon Wilson in: Exhibitions, Shows and Club Events
mike T
Started by: JA in: The Tea Room
JA
Started by: Rainbows in: Workshop Tools and Tooling
Fulmen
Started by: paul1956 in: Beginners questions
paul1956
View full reply list.