Accurate Clamping

Accurate Clamping

Home › Forums › The Tea Room › Accurate Clamping

Viewing 13 posts - 1 through 13 (of 13 total)
  • Author
    Posts
  • #556963
    Joseph Noci 1
    Participant
      @josephnoci1

      (!)

      c_clamp.jpg

      Joe

      #36520
      Joseph Noci 1
      Participant
        @josephnoci1
        #556964
        Paul Lousick
        Participant
          @paullousick59116

          They also make good adjustable spanners/wrenches

          #556985
          Nigel Bennett
          Participant
            @nigelbennett69913

            And if you put a pair of Stillsons on to the barrel so you can get a bit more grip, you can accurately measure at what size Brazil nuts crack. Obviously you have to use a metric one for metric nuts.

            #556990
            not done it yet
            Participant
              @notdoneityet

              Should never make measurements when heated?🙂

              or

              Are G-clamps that expensive, where you live?🙂

              #556992
              Paul White 3
              Participant
                @paulwhite3

                Joe, that trip to the desert, did you see any Hares running?

                #556994
                Former Member
                Participant
                  @formermember12892

                  [This posting has been removed]

                  #557002
                  Brian G
                  Participant
                    @briang
                    Posted by Paul Lousick on 04/08/2021 09:25:59:

                    They also make good adjustable spanners/wrenches

                    I thought that is what digital verniers* were for.

                    Brian G

                    *Sorry, "I can resist anything except temptation"

                    #557005
                    not done it yet
                    Participant
                      @notdoneityet

                      I’m sure Joe is ‘havin’ a larf!’.

                      But what would you use a sub-standard chinese micrometer for? A good second life for it rather than just binning it or selling it on an auction site?

                      It’s not a heavy load duty for that particular job. Perhaps whoever had been to the local car boot sale for a G-clamp and this was the closest he could get? Probably cheaper than a new clamp.

                      #557013
                      Dave Halford
                      Participant
                        @davehalford22513

                        I can think of a better use for a 'C' spanner.

                        #557019
                        Buffer
                        Participant
                          @buffer

                          I find the numbers on my g cramps are handy as a crude torque setting.

                          #557022
                          Dalboy
                          Participant
                            @dalboy

                            Is he also using a Micro welder

                            #557036
                            Joseph Noci 1
                            Participant
                              @josephnoci1
                              Posted by Paul White 3 on 04/08/2021 12:38:32:

                              Joe, that trip to the desert, did you see any Hares running?

                              Hello Paul!

                              Actually, only one, and it was not running – doing its best to hide from us. Wildlife very scarce at the moment, after 5 years of drought. In 10 days we saw only the one herd of Springbuck, over 1000km of travel in the North West regions, two Gemsbok ( of the Oryx family), where 5-6 years ago a trip like this would yield 2000-3000 Springbuck, a few hundred Gemsbuck. etc…and the Lions are suffering – many have died from starvation.. terrible situation the Wildlife are in here..

                              Joe

                            Viewing 13 posts - 1 through 13 (of 13 total)
                            • Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

                            Latest Replies

                            Home › Forums › The Tea Room › Topics

                            Viewing 25 topics - 1 through 25 (of 25 total)
                            Viewing 25 topics - 1 through 25 (of 25 total)

                            View full reply list.