6 wheel brake van

This topic has 3 replies, 2 voices, and was last updated 29 November 2021 at 15:39 by JACK SIDEBOTHAM.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
28 November 2021 at 15:23 #573335
JACK SIDEBOTHAM
Participant
@jacksidebotham67303
Hi all,l am looking for a set of drawings for a 6 wheel toad 26ton brake van….if l can get hold of a set of good 3 views l am happy to produce the working drawings l need from them,,,,,l can scale up from a plastic kit,but prefer to work from a good three view,been looking in the usual places but not having much luck!!!.
Advert

28 November 2021 at 15:23 #2093
JACK SIDEBOTHAM
Participant
@jacksidebotham67303
28 November 2021 at 16:25 #573343
Peter Cook 6
Participant
@petercook6
Googling images for "6 wheel toad 26ton brake van" gets me lots of pictures – many of models, but quite a few original photos.

and a lot of detail about the GWR versions (with pictures and detailing) although none seem to be 26T at

GWR Goods Brake Vans

Edited By Peter Cook 6 on 28/11/2021 16:36:47
29 November 2021 at 15:39 #573487
JACK SIDEBOTHAM
Participant
@jacksidebotham67303
Thanks peter,l seem to have made a mistake in my post,the weight should be "24 tons",not 26,…..yes you are correct,there are a fair few pictures online,but l am after a really good 3 view drawing…..l am sure the info exists,the model kit people had to get their details from somewhere,the 3 view you found is of a 4 wheel vehicle,but that is the sort of thing l am after…….l intend to produce a 5"gauge model for use as a driving truck,the extra wheels will spread the load better,cheers,jack.
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Model Turbines 1 2 … 26 27
  Started by: Turbine Guy in: Stationary engines
- 28
- 664
- 5 November 2026 at 20:02
  Turbine Guy
- Building the V-Twin “Kelsey” 1 2 … 4 5
  Started by: JasonB in: Stationary engines
- 18
- 123
- 5 November 2026 at 19:20
  Jim Nic
- BCA MK III Jig Borer
  Started by: pjh in: Help and Assistance! (Offered or Wanted)
- 7
- 10
- 5 November 2026 at 19:19
  duncan webster 1
- Minnie Traction Engine – Damper Hinge Plate
  Started by: Dominic Bramley in: Traction engines
- 6
- 15
- 5 November 2026 at 18:56
  Dominic Bramley
- New Mystery Lathe
  Started by: mart7mcfl7 in: Manual machine tools
- 2
- 3
- 5 November 2026 at 18:42
  mart7mcfl7
- Richard Simmonds’ “How To Make A Weight Driven Clock”
  Started by: iacooper in: Clocks and Scientific Instruments
- 7
- 11
- 5 November 2026 at 18:17
  iacooper
- Onshape Learning
  Started by: BOB BLACKSHAW 1 in: CAD – Technical drawing & design
- 5
- 11
- 5 November 2026 at 18:05
  Engine Builder
- Unimat 3 baseplate
  Started by: mart7mcfl7 in: Manual machine tools
- 4
- 9
- 5 November 2026 at 17:41
  mart7mcfl7
- WAR FINISH
  Started by: Speedy Builder5 in: The Tea Room
- 11
- 12
- 5 November 2026 at 16:58
  not done it yet
- Richard B’s Minnie. 1 2
  Started by: Richard B in: Traction engines
- 4
- 26
- 5 November 2026 at 16:30
  Richard B
- Unusual dual speed pulley on motor
  Started by: gerry madden in: Manual machine tools
- 10
- 17
- 5 November 2026 at 16:28
  Macolm
- Most used ‘rubbish’ tool
  Started by: jaCK Hobson in: The Tea Room
- 9
- 12
- 5 November 2026 at 14:43
  Vic
- Shape of Boxford fixed steady blocks
  Started by: Grindstone Cowboy in: Beginners questions
- 7
- 9
- 5 November 2026 at 14:12
  Grindstone Cowboy
- A small Hobbing Machine
  Started by: Michael Gilligan in: Workshop Tools and Tooling
- 3
- 5
- 5 November 2026 at 14:08
  Michael Gilligan
- Micrometer ratchets
  Started by: Graeme Seed in: Workshop Tools and Tooling
- 11
- 17
- 5 November 2026 at 13:09
  Graeme Seed
- Mitotoyo dial caliper battery or innards.
  Started by: Clive Farrar in: General Questions
- 10
- 12
- 5 November 2026 at 09:01
  Hollowpoint
- 3d Printed Carriage Stop for Warco WM180
  Started by: James A in: Workshop Tools and Tooling
- 1
- 1
- 5 November 2026 at 07:51
  James A
- Mitutoyo Dial Calliper dial?
  Started by: Bo’sun in: Workshop Tools and Tooling
- 4
- 7
- 4 November 2026 at 22:03
  Pete
- SOLIDWORKS for MAKERS
  Started by: Paul Lousick in: CAD – Technical drawing & design
- 2
- 3
- 4 November 2026 at 21:54
  Paul Lousick
- 127t Gear With ⅞” Shaft and Keyway – Which Lathe?
  Started by: Captain Barnacles in: Workshop Tools and Tooling
- 15
- 24
- 4 November 2026 at 19:56
  Captain Barnacles
- What Did You Do Today 2026 1 2 … 9 10
  Started by: JasonB in: The Tea Room
- 56
- 247
- 4 November 2026 at 17:50
  Nigel Graham 2
- help please in identifying
  Started by: John Holloway in: General Questions
- 4
- 9
- 4 November 2026 at 16:43
  renardiere7
- Mini ER11 milling/drilling unit
  Started by: YouraT in: Manual machine tools
- 5
- 9
- 4 November 2026 at 12:05
  bernard towers
- Lathe improvements? 1 2 … 5 6
  Started by: Niels Abildgaard in: Manual machine tools
- 24
- 130
- 4 November 2026 at 09:14
  Niels Abildgaard
- What aluminium sizes do you regularly use in your workshop?
  Started by: aytact in: Manual machine tools
- 6
- 6
- 4 November 2026 at 09:11
  AStroud

6 wheel brake van

6 wheel brake van

Latest Replies

Latest Issue

November 2026

Newsletter Sign-up

Latest Replies