3.5″ gauge chesapeake & ohio lima greenbrier 4.8.4 steam locomotive build

This topic has 1 reply, 1 voice, and was last updated 14 January 2016 at 21:22 by wayne jeffries 1.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
14 January 2016 at 21:22 #221147
wayne jeffries 1
Participant
@waynejeffries1
HERE IS A PHOTO JUST CHECKING TO MAKE SURE ALL PIECES ARE THERE ON CERTAIN PARTS. I ONLY HAVE PICTURES OF THE LOCOMOTIVE WHICH I TOOK OF THIS SIDE OF LOCOMOTIVE SO I NEED TO CHECK BOOKS ETC IF PARTS ARE MISSING FROM BOXES WHICH I HAVE WHICH THERE IS A LOT OFF ITS LIKE KRIPTON FACTOR I THEN NEED TO MAKE NEW ONES I ONLY HAVE THREE PHOTOS OF MODEL. THE MODEL WAS IN RAW IN PIECES EXEPT LOWER HALF OF LOCOMOTIVE WHICH I HAVE COMPLETLY RE SPRAYED/PAINTED. I AM JUST MAKING NEW SET BRASS WALK WAYS AND STEPS AS ORIGINALS WHERE LOST MANY YEARS AGO. THE PROBLEM S ARISE AS I BUILD MODEL SO VERY DIFFICULT SO IT NOT HELPING AS I AM PARCIALY SIGHTED AFTER SUFFERING STROKE 2009.

WAYNE
Advert

14 January 2016 at 21:22 #1488
wayne jeffries 1
Participant
@waynejeffries1
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- injector pipe size
  Started by: Garry Coles in: General Questions
- 3
- 3
- 13 November 2026 at 17:32
  Nigel Graham 2
- Myford
  Started by: Michael Gilligan in: Manual machine tools
- 9
- 15
- 13 November 2026 at 16:48
  Nicholas Farr
- Parting off 1 2 3
  Started by: Peter Simpson 3 in: Beginners questions
- 23
- 53
- 13 November 2026 at 15:37
  Geoff Dunsby
- LAzar egde finder
  Started by: ian Holdsworth in: Beginners questions
- 11
- 15
- 13 November 2026 at 15:25
  Geoff Dunsby
- Mitotoyo dial caliper battery or innards.
  Started by: Clive Farrar in: General Questions
- 14
- 19
- 13 November 2026 at 14:16
  bernard towers
- Air Conditioning portable unit
  Started by: BOB BLACKSHAW 1 in: The Tea Room
- 3
- 5
- 13 November 2026 at 11:46
  howardb
- Help Clarke CL430 Lathe feed coupling 1 2
  Started by: daz996 in: Beginners questions
- 12
- 30
- 13 November 2026 at 11:36
  5sahib
- Hello everyone
  Started by: point.two.five in: Introduce Yourself – New members start here!
- 6
- 10
- 13 November 2026 at 11:12
  point.two.five
- What Did You Do Today 2026 1 2 … 10 11
  Started by: JasonB in: The Tea Room
- 56
- 254
- 13 November 2026 at 07:25
  JasonB
- Micrometer ratchets 1 2
  Started by: Graeme Seed in: Workshop Tools and Tooling
- 16
- 30
- 13 November 2026 at 06:47
  Speedy Builder5
- Dopiest question ever…how to use a bin?
  Started by: Ian Parkin in: The Tea Room
- 8
- 14
- 12 November 2026 at 23:04
  not done it yet
- Greenbat 3 ton battery loco
  Started by: Pippin in: Work In Progress and completed items
- 3
- 5
- 12 November 2026 at 17:25
  renardiere7
- Brake shoe castings and forming a lip in sheet steel
  Started by: Pippin in: Help and Assistance! (Offered or Wanted)
- 3
- 3
- 12 November 2026 at 12:20
  bernard towers
- Annoying advert 1 2
  Started by: Dalboy in: The Tea Room
- 20
- 34
- 12 November 2026 at 10:57
  JasonB
- Coventry Diehead CH Reassembly
  Started by: Tony Ray in: Workshop Tools and Tooling
- 4
- 14
- 12 November 2026 at 08:16
  Jan Raap
- Impact Bits
  Started by: Vic in: Workshop Tools and Tooling
- 5
- 7
- 11 November 2026 at 18:31
  old mart
- Close-coupled Tees (Underfloor heating)
  Started by: Andy Stopford in: The Tea Room
- 7
- 16
- 11 November 2026 at 17:07
  Andy Stopford
- 3d Printed Carriage Stop for Warco WM180 1 2
  Started by: James A in: Workshop Tools and Tooling
- 13
- 26
- 11 November 2026 at 14:55
  JasonB
- Kirimoto CAM
  Started by: Geoff Dunsby in: CAD – Technical drawing & design
- 3
- 14
- 11 November 2026 at 09:28
  JasonB
- Onshape Learning
  Started by: BOB BLACKSHAW 1 in: CAD – Technical drawing & design
- 6
- 18
- 10 November 2026 at 17:23
  BOB BLACKSHAW 1
- My adventures with a bench top CNC mill 1 2 3 4
  Started by: John Hinkley in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 10
- 84
- 10 November 2026 at 12:07
  John Hinkley
- Straining the old grey matter!
  Started by: Geoff Dunsby in: Introduce Yourself – New members start here!
- 6
- 10
- 10 November 2026 at 10:42
  Geoff Dunsby
- Hello! …and help
  Started by: sbruce886 in: Introduce Yourself – New members start here!
- 5
- 8
- 10 November 2026 at 09:48
  noel shelley
- New Mystery Lathe 1 2
  Started by: mart7mcfl7 in: Manual machine tools
- 9
- 27
- 10 November 2026 at 07:35
  JasonB
- Pendulum Rod Weight Tray
  Started by: John Purdy in: Clocks and Scientific Instruments
- 4
- 15
- 10 November 2026 at 00:29
  duncan webster 1

3.5″ gauge chesapeake & ohio lima greenbrier 4.8.4 steam locomotive build

3.5″ gauge chesapeake & ohio lima greenbrier 4.8.4 steam locomotive build

Latest Replies

Latest Issue

November 2026

Newsletter Sign-up

Latest Replies