Phosphor bronze balls

Phosphor bronze balls

This topic has 4 replies, 3 voices, and was last updated 1 January 2014 at 11:22 by Deric.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
31 December 2013 at 19:18 #139264
Deric
Participant
@deric
Sorry if I've got the wrong place to post this, but not sure where else to post

I am currently building a 3" Burrell and at present making the water pump. Can anyone help with information about where I can buy either Stainlees steel or phosphor bronze balls I need 1×3/8" and 1×1/2" balls. Everywhere I look I have to buy 10's at a time plus postage making it very expensive and a waste.

any help much appreciated.

regards

Deric
Advert

31 December 2013 at 19:18 #6995
Deric
Participant
@deric
Sourcing Stainless and phosphor bronze balls
31 December 2013 at 19:31 #139266
Mike Poole
Participant
@mikepoole82104
Ekp supplies list pb balls for 95p and £1.20

Mike
31 December 2013 at 22:03 #139292
Harry Wilkes
Participant
@harrywilkes58467
Posted by Michael Poole on 31/12/2013 19:31:41:

Ekp supplies list pb balls for 95p and £1.20

Mike

Second that also Poly Models and Macc Models
1 January 2014 at 11:22 #139333
Deric
Participant
@deric
Thank you both very much I'll have a look and get them sorted today

thanks

Deric
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Buzz Ballz packaging “unrecyclable” in U.K.
  Started by: Michael Gilligan in: The Tea Room
- 1
- 1
- 25 July 2026 at 02:35
  Michael Gilligan
- Mysterious Morse Tapers
  Started by: Pippin in: Workshop Tools and Tooling
- 9
- 14
- 25 July 2026 at 02:08
  peak4
- REXON SS16A scroll saw
  Started by: Michael Gilligan in: Workshop Tools and Tooling
- 3
- 7
- 24 July 2026 at 22:32
  Michael Gilligan
- Hobbing a Brass or Aluminium Drive Pulley to Stop Belt Slippage
  Started by: Blue Heeler in: Hints And Tips for model engineers
- 5
- 5
- 24 July 2026 at 21:57
  Michael Gilligan
- Posts by new member containing ads.
  Started by: alecs in: Website Questions, Comments, and Suggestions
- 5
- 9
- 24 July 2026 at 20:22
  bernard towers
- Is anyone interested in developping a new series of model engines? 1 2 3 4
  Started by: paulmichael1084 in: General Questions
- 20
- 83
- 24 July 2026 at 16:42
  John P
- Deep drilling
  Started by: Speedy Builder5 in: Workshop Techniques
- 9
- 17
- 24 July 2026 at 16:34
  ega
- Doris Black 5 mech lubricator question.
  Started by: kevmol57 in: Workshop Techniques
- 4
- 10
- 24 July 2026 at 13:25
  kevmol57
- 24cc DIESEL ENGINE FROM SOLID 1 2 3
  Started by: dean clarke 2 in: I/C Engines
- 13
- 71
- 24 July 2026 at 10:27
  KEITH BEAUMONT
- Long awaited FreeCAD version 1.1 released
  Started by: Russell Eberhardt in: CAD – Technical drawing & design
- 3
- 8
- 24 July 2026 at 10:16
  Roger Woollett
- Nut screws washer and bolts – you know the old joke
  Started by: Kiwi Bloke in: General Questions
- 16
- 22
- 24 July 2026 at 08:55
  Gerard O’Toole
- The Latest INDEX to Model Engineer & Workshop (Also past issues of MEW) 1 2 3
  Started by: David Frith in: Model Engineer & Workshop
- 7
- 53
- 24 July 2026 at 08:18
  David Frith
- Chat GPTgoes rogue and launches cyber attack
  Started by: Robert Atkinson 2 in: The Tea Room
- 8
- 9
- 24 July 2026 at 07:29
  Adrian R2
- Workshop Heaven but must have cost a fortune.
  Started by: alan ord 2 in: Workshop Tools and Tooling
- 5
- 5
- 24 July 2026 at 02:19
  Bill Phinn
- What Did You Do Today 2026 1 2 … 6 7
  Started by: JasonB in: The Tea Room
- 43
- 152
- 23 July 2026 at 21:50
  Nigel Graham 2
- Mitutoyo Metrology Handbook – Still Available From Mitutoyo UK
  Started by: southernchap in: Books
- 3
- 6
- 23 July 2026 at 21:46
  Robert Atkinson 2
- It’s A Compressor, Jim, But Not… 1 2
  Started by: Nigel Graham 2 in: General Questions
- 12
- 30
- 23 July 2026 at 21:17
  Nigel Graham 2
- Dart 7 1/4 Build
  Started by: Roy Birch in: Locomotives
- 1
- 1
- 23 July 2026 at 14:25
  Roy Birch
- Electronics EL714-C DRO Display
  Started by: houstonceng in: Workshop Tools and Tooling
- 2
- 3
- 23 July 2026 at 13:16
  houstonceng
- Mechanical lubrication steam locos. Non return valve opening pressure
  Started by: peter allen 1 in: General Questions
- 7
- 14
- 23 July 2026 at 10:28
  noel shelley
- BlueBerries
  Started by: Michael Gilligan in: The Tea Room
- 13
- 22
- 23 July 2026 at 02:10
  Grindstone Cowboy
- Bridgeport Series 1 CNC 1 2 3 4
  Started by: tomcnc in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 12
- 76
- 23 July 2026 at 00:47
  seemack
- Help needed: Custom turned steering rack plug (Derbyshire / DE4)
  Started by: darikde4 in: General Questions
- 3
- 3
- 22 July 2026 at 23:03
  paulmichael1084
- Hi folks – the answer to everything is 42
  Started by: hughgee42 in: Introduce Yourself – New members start here!
- 2
- 2
- 22 July 2026 at 16:59
  jaCK Hobson
- Face Drive Pins
  Started by: Michael Gilligan in: Materials
- 5
- 7
- 22 July 2026 at 14:24
  bernard towers

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

August 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies