Warco WM240

Warco WM240

This topic has 6 replies, 5 voices, and was last updated 17 July 2012 at 08:31 by bill Maskell.

Viewing 7 posts - 1 through 7 (of 7 total)

Author

Posts
16 July 2012 at 17:12 #6247
bill Maskell
Participant
@billmaskell10781
Thread and feed table
Advert

16 July 2012 at 17:12 #94555
bill Maskell
Participant
@billmaskell10781
Hi all, Can anybody send me a copy of the thread and feed table for my Warco WM240 please.

Best wishes. Bill
16 July 2012 at 17:36 #94556
Andyf
Participant
@andyf
Hi Bill,

If yours has an imperial leadscrew and no-one comes up with anything better, go to LINK and click on the RH picture on the top row..

Andy
16 July 2012 at 20:54 #94571
1
Participant
@1
Hi Bill

I have a PDF of a Thread and Feed Table for a WM 240 manufactured in Dec 2010. Unfortunately I don't know how to publish it on here but if you PM me I will send it by return.

Jim
16 July 2012 at 22:35 #94582
Springbok
Participant
@springbok
Hi go to Grizzly.com and download the complete manual It never ceases to amaze me why Warco, Chesteter et all; who sell the same badged machines like grizzly do not write there own and just put in a chingalese version in the box.

Bob
16 July 2012 at 22:44 #94585
John Stevenson 1
Participant
@johnstevenson1
Because Grizzly don't sell the WM240 model
17 July 2012 at 08:31 #94603
bill Maskell
Participant
@billmaskell10781
Hi Bob, Yes, John Stevenson is right, been on the Grizzly site several time to no avail. Looks like I might have to buy the operators manual from Warco if all else fails. Best wishes to all. Bill
Author

Posts

Viewing 7 posts - 1 through 7 (of 7 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- DC Brushed Servomotor Controller
  Started by: Barry Smith 4 in: Electronics in the Workshop
- 1
- 1
- 13 October 2026 at 09:04
  Barry Smith 4
- rotary table issue
  Started by: tatler in: Workshop Tools and Tooling
- 6
- 12
- 13 October 2026 at 09:04
  JasonB
- Powerfeeders
  Started by: larry phelan 1 in: Help and Assistance! (Offered or Wanted)
- 6
- 13
- 13 October 2026 at 09:00
  Hollowpoint
- Best approach to pip removal
  Started by: Bill Phinn in: Workshop Techniques
- 10
- 21
- 13 October 2026 at 08:56
  Hollowpoint
- Workshop building – have lots of space
  Started by: Carl Farrington in: General Questions
- 8
- 9
- 13 October 2026 at 08:39
  Hollowpoint
- Tom Senior small vertical head axial play
  Started by: chris1984 in: Manual machine tools
- 4
- 6
- 13 October 2026 at 07:20
  David Senior
- Farm Gate Lock.
  Started by: Grizzly bear in: The Tea Room
- 12
- 15
- 13 October 2026 at 07:12
  DC31k
- Still On IMSI’s Books!
  Started by: Nigel Graham 2 in: CAD – Technical drawing & design
- 1
- 1
- 13 October 2026 at 00:34
  Nigel Graham 2
- Model Engineer Magazine Collection
  Started by: mfengine1 in: Books
- 11
- 21
- 12 October 2026 at 20:12
  noel shelley
- rotary table to make 1 gauge drive wheels
  Started by: tatler in: Locomotives
- 2
- 2
- 12 October 2026 at 19:43
  JasonB
- Model Turbines 1 2 … 26 27
  Started by: Turbine Guy in: Stationary engines
- 28
- 659
- 12 October 2026 at 19:22
  Turbine Guy
- Midlands Exhibition, share a taxi
  Started by: duncan webster 1 in: Exhibitions, Shows and Club Events
- 1
- 1
- 12 October 2026 at 18:30
  duncan webster 1
- Does anyone have any info about these vices
  Started by: bjcolyer in: Introduce Yourself – New members start here!
- 2
- 2
- 12 October 2026 at 17:39
  Nigel Bennett
- New Member
  Started by: starjump in: Introduce Yourself – New members start here!
- 4
- 10
- 12 October 2026 at 16:37
  Howard Lewis
- Motorcycle Centre Stand Pivot
  Started by: COLIN MARTIN 2 in: Related Hobbies including Vehicle Restoration
- 8
- 16
- 12 October 2026 at 15:04
  COLIN MARTIN 2
- Moving Targets
  Started by: Michael Gilligan in: The Tea Room
- 11
- 21
- 12 October 2026 at 13:07
  Martin Johnson 1
- Clutch for ML7R
  Started by: Andrew Tinsley in: Manual machine tools
- 7
- 12
- 12 October 2026 at 10:49
  Dave Wootton
- The lazy man’s fly cutter
  Started by: Sonic Escape in: Workshop Tools and Tooling
- 12
- 16
- 12 October 2026 at 09:45
  Andy Stopford
- Reverting An ML7 To Change-Wheels: Any Thoughts?? 1 2 3
  Started by: Nigel Graham 2 in: Manual machine tools
- 22
- 57
- 12 October 2026 at 09:33
  Charles Lamont
- What Did You Do Today 2026 1 2 … 8 9
  Started by: JasonB in: The Tea Room
- 54
- 217
- 11 October 2026 at 23:25
  Nigel Graham 2
- 3 1/2” gauge loco, coupling height?
  Started by: Paul McDonough in: Locomotives
- 5
- 7
- 11 October 2026 at 22:14
  Paul McDonough
- Liney RV-2 Rescue
  Started by: JasonB in: Stationary engines
- 3
- 9
- 11 October 2026 at 21:43
  renardiere7
- Preview of whats coming in Freecad 26.3 1 2
  Started by: Russell Eberhardt in: CAD – Technical drawing & design
- 8
- 26
- 11 October 2026 at 20:36
  lee webster
- Myford ML4 Identification
  Started by: Steven Volz in: Manual machine tools
- 7
- 9
- 11 October 2026 at 17:08
  Howard Lewis
- Hello from Pensford
  Started by: ralpharama in: Introduce Yourself – New members start here!
- 3
- 3
- 11 October 2026 at 16:08
  Howard Lewis

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

October 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies