Mitsubishi vfd

This topic has 3 replies, 3 voices, and was last updated 20 March 2019 at 15:10 by Brian Hutchings.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
20 March 2019 at 14:02 #401368
David Siddle 1
Participant
@davidsiddle1
I'm needing a little help picking the correct drive. I've looked at the manual on line, but I'm still a bit confused Could anyone please tell me if the following model would be suitable for powering my 3ph fobco from domestic supply? Many thanks.

FR-D720S-042SC-EC

David
Advert

20 March 2019 at 14:02 #32009
David Siddle 1
Participant
@davidsiddle1
20 March 2019 at 14:29 #401371
Wingo
Participant
@wingo
Hi,

This is a 230v input single phase and 220v three phase ouput inverter. Rated at 0.75kw.

Your motor will need to support 220 / or 230v phree phase supply, often by connecting in Delta on a dual rated motor.

It will 'putting in a box' to protect it with room to be able to loose the heat generated.

Then with correct configuration it will then work!

If you not sure about the motor put up a photo of the motor rating plate.

Michael
20 March 2019 at 15:10 #401377
Brian Hutchings
Participant
@brianhutchings
Hello David, You could try giving Direct Drives a call, I found them to be very helpful recently.

Brian

Direct drives
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Axminster Granite Surface Plate – Delamination of surface coating
  Started by: Greensands in: Workshop Tools and Tooling
- 5
- 5
- 9 June 2026 at 23:46
  Nigel Graham 2
- Searching for “The Pennsylvania A3 Switcher” by Kozo Hiraoka
  Started by: timdotd in: Books
- 3
- 3
- 9 June 2026 at 21:36
  John Hinkley
- Fusion CAD / CAM Problem
  Started by: Shaun Churchill in: CAD – Technical drawing & design
- 3
- 5
- 9 June 2026 at 21:17
  Julie Ann
- Noggin End Metals?
  Started by: anonymouse in: Materials
- 2
- 2
- 9 June 2026 at 20:43
  Grizzly bear
- Lightning 1 2
  Started by: duncan webster 1 in: Electronics in the Workshop
- 12
- 34
- 9 June 2026 at 20:40
  Robert Atkinson 2
- Running 380V 3-phase motor on 230V 1-phase
  Started by: jimalm in: Electronics in the Workshop
- 6
- 7
- 9 June 2026 at 19:30
  Robert Atkinson 2
- Another new member in France
  Started by: jimalm in: Introduce Yourself – New members start here!
- 6
- 6
- 9 June 2026 at 18:02
  Speedy Builder5
- PM,s
  Started by: Redpiperbob in: General Questions
- 3
- 6
- 9 June 2026 at 16:37
  peak4
- Gauge Glass Fitting
  Started by: Thomas Clarke in: General Questions
- 2
- 2
- 9 June 2026 at 16:13
  noel shelley
- RS & J 4NHP in 2″ scale
  Started by: TREVOR WILSON in: Traction engines
- 2
- 2
- 9 June 2026 at 15:56
  Dave Halford
- Myford VMC Spindle Advice Please.
  Started by: Nigel Graham 2 in: Manual machine tools
- 8
- 17
- 9 June 2026 at 14:23
  Graham Meek
- An extraordinary lathe bargain?
  Started by: Robin Graham in: The Tea Room
- 10
- 10
- 9 June 2026 at 13:38
  JA
- Taylor Hobson Pantograph Engraver Model D
  Started by: jaCK Hobson in: Workshop Tools and Tooling
- 7
- 21
- 9 June 2026 at 12:26
  Charles Jambon
- Breaking gears in a Myford ML7
  Started by: drnewcomb in: Manual machine tools
- 14
- 21
- 9 June 2026 at 12:19
  Speedy Builder5
- Cheap digital spirit level accuracy 1 2
  Started by: Mick Bailey in: Workshop Tools and Tooling
- 18
- 44
- 9 June 2026 at 11:56
  Nicholas Farr
- Nickel Silver
  Started by: Carl in: Materials
- 10
- 13
- 8 June 2026 at 22:46
  old mart
- Steam wagon “Meg” advice, please.
  Started by: Mike Henderson 1 in: Traction engines
- 6
- 10
- 8 June 2026 at 22:19
  [email protected]
- S,O,D 1 2
  Started by: larry phelan 1 in: The Tea Room
- 27
- 30
- 8 June 2026 at 18:14
  Roderick Jenkins
- Improving a 30 taper fit
  Started by: Andrew Skinner in: Manual machine tools
- 11
- 18
- 8 June 2026 at 17:11
  bernard towers
- where to find locomotive / train plans ?
  Started by: zuji miko in: Beginners questions
- 5
- 7
- 8 June 2026 at 16:32
  JA
- 4 cylinder rotary valve
  Started by: AStroud in: Work In Progress and completed items
- 5
- 13
- 8 June 2026 at 16:15
  AStroud
- What Did You Do Today 2026 1 2 … 4 5
  Started by: JasonB in: The Tea Room
- 34
- 112
- 8 June 2026 at 12:58
  renardiere7
- PVC joints
  Started by: Speedy Builder5 in: Workshop Techniques
- 6
- 10
- 8 June 2026 at 12:44
  blowlamp
- digital microscope for poor eyesight
  Started by: bernard towers in: Electronics in the Workshop
- 9
- 13
- 8 June 2026 at 08:13
  Dell
- Replacement Allbrit Draftmaster Protractor Rulers
  Started by: wigan2026 in: Workshop Tools and Tooling
- 6
- 10
- 7 June 2026 at 19:51
  Grindstone Cowboy

Mitsubishi vfd

Mitsubishi vfd

Latest Replies

Latest Issue

May 2026

Newsletter Sign-up

Latest Replies