M-Machine

This topic has 11 replies, 8 voices, and was last updated 3 April 2017 at 23:32 by James A.

Viewing 12 posts - 1 through 12 (of 12 total)

Author

Posts
31 March 2017 at 17:47 #29697
richard 2
Participant
@richard2
Advert

31 March 2017 at 17:47 #291494
richard 2
Participant
@richard2
For over a week I have been telephoning and leaving a message with M-Machine but no joy.

I want to place an order but need a little advice before doing so.

Does anyone have any current info on the company as in the past they

have been very good.

Many thanks

Richard.
1 April 2017 at 09:20 #291597
Brian Wood
Participant
@brianwood45127
Hello Richard,

I have always found them prompt, efficient and accessible. They do have holidays though, so they could be shut.

In case you are miss reading them, the contact details are:-

Phone/Fax 01325 381300 E mail [email protected]

Website http://www.m-machine-metals.co.uk

Regards
Brian
1 April 2017 at 09:35 #291602
richard 2
Participant
@richard2
Hello Brian

Thanks for message – I will keep on trying.

Have just discovered MG-metals in Romsey Hants.

Does anyone know anything about them from a home workshop point of view?

Thanks

Richard.
1 April 2017 at 11:18 #291616
Nick Hulme
Participant
@nickhulme30114
Posted by richard 2 on 01/04/2017 09:35:50:

Does anyone know anything about them from a home workshop point of view?

Some suppliers are great for some things and for others not so much.

What are you shopping for? This could influence the suppliers suggested,

– Nick
1 April 2017 at 12:07 #291628
Michael Cox 1
Participant
@michaelcox1
I use M-Machine as my main supplier of raw material. I have never had any issues with them and always prompt efficient service. I suspect that, as Brian says, that they may be closed for some reason (holiday, show etc)

Mike
3 April 2017 at 08:12 #291891
Alan Gordon 4
Participant
@alangordon4
I have been using M-Machines for a few years and I fully agree with Michael, The respond has always been courteous, prompt and helpful therefore I will continue to use them.

Alan
3 April 2017 at 10:20 #291903
richard 2
Participant
@richard2
Thanks everyone.

Spoke to M-Machine this morning – order placed

so tool–holder well under way.

Regards

Richard.
3 April 2017 at 10:40 #291906
Spurry
Participant
@spurry
Richard

Was there any explanation for the apparent loss of communication?

Pete
3 April 2017 at 16:27 #291936
Donald Mitchell
Participant
@donaldmitchell68891
M-Machine working as per normal for me today.

Donald
3 April 2017 at 17:18 #291939
richard 2
Participant
@richard2
Pete

M-M said that they had been extremely busy but working normally.

I did not press the point but gave my order to a lady who, as always,

was highly competent.

It's nice to hear that they are very busy.

regards

Richard.
3 April 2017 at 23:32 #292002
James A
Participant
@jamesalford67616
I have used the firm in Romsey for copper sheet. The were fine and a fair price.

James.
Author

Posts