I section metal

I section metal

This topic has 6 replies, 5 voices, and was last updated 12 December 2017 at 10:56 by ken king, King Design.

Viewing 7 posts - 1 through 7 (of 7 total)

Author

Posts
12 December 2017 at 09:06 #25692
Eric Cox
Participant
@ericcox50497
Advert

12 December 2017 at 09:07 #331675
Eric Cox
Participant
@ericcox50497
Is small (1/4 – 6mm) I section metal available or will I have to machine it out of square bar.
12 December 2017 at 09:22 #331677
Ady1
Participant
@ady1
Is it 1mm thick?

If its 2mm then its a block with a groove, 2+2+2=6
12 December 2017 at 09:56 #331683
JasonB
Moderator
@jasonb
Try Eileen's Emporium or knupher

Edited By JasonB on 12/12/2017 09:58:20
12 December 2017 at 09:58 #331684
Neil Wyatt
Moderator
@neilwyatt
If the exact section isn't critical, buy small u-section and soft solder two pieces back to back.

Neil
12 December 2017 at 10:43 #331698
Eric Cox
Participant
@ericcox50497
Thanks Jason, Eileen's appears to be the dogs.
12 December 2017 at 10:56 #331701
ken king, King Design
Participant
@kenkingkingdesign
Eric, you didn't specify a material, but I have seen Brass in I section, along with Tee and Angle in several model shops, but Eileen's does seem a good source, and one I didn't previously know of, so thanks for that,

Regards,

Ken
Author

Posts

Viewing 7 posts - 1 through 7 (of 7 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Tools you hate using or just don’t get on with? 1 2
  Started by: Hollowpoint in: General Questions
- 26
- 42
- 10 August 2026 at 22:49
  Nigel Graham 2
- Solar panel
  Started by: duncan webster 1 in: Electronics in the Workshop
- 12
- 21
- 10 August 2026 at 22:29
  John Haine
- Annoying Ad 1 2
  Started by: jaCK Hobson in: Website Questions, Comments, and Suggestions
- 13
- 26
- 10 August 2026 at 22:22
  Vic
- Problem firing up
  Started by: Michael Callaghan in: General Questions
- 10
- 14
- 10 August 2026 at 21:40
  Paul Kemp
- A chemistry question
  Started by: duncan webster 1 in: The Tea Room
- 8
- 11
- 10 August 2026 at 18:52
  Michael Gilligan
- Lightning 1 2 3
  Started by: duncan webster 1 in: Electronics in the Workshop
- 17
- 67
- 10 August 2026 at 17:39
  duncan webster 1
- can anyone make me a file? 3d file
  Started by: Ian Parkin in: 3D Printers and 3D Printing
- 8
- 11
- 10 August 2026 at 16:21
  Roderick Jenkins
- Stuart Beam Piston 1 2
  Started by: Chris Taylor 3 in: Beginners questions
- 12
- 29
- 10 August 2026 at 16:09
  JasonB
- New project for 2025 1 2
  Started by: SteveP in: I/C Engines
- 8
- 34
- 10 August 2026 at 14:31
  SteveP
- What the hell is going on with the suppliers??? 1 2
  Started by: Hollowpoint in: General Questions
- 20
- 35
- 10 August 2026 at 14:16
  File Handle
- VFD size
  Started by: vintagengineer in: Electronics in the Workshop
- 7
- 9
- 10 August 2026 at 11:33
  Emgee
- What tool is this?
  Started by: Pete CAMBRIDGE in: Workshop Tools and Tooling
- 6
- 10
- 10 August 2026 at 10:27
  Pete CAMBRIDGE
- 24cc DIESEL ENGINE FROM SOLID 1 2 3
  Started by: dean clarke 2 in: I/C Engines
- 14
- 73
- 10 August 2026 at 08:59
  Charles Lamont
- What Did You Do Today 2026 1 2 … 6 7
  Started by: JasonB in: The Tea Room
- 43
- 154
- 9 August 2026 at 22:43
  Nigel Graham 2
- Mystery debris? 1 2
  Started by: Bo’sun in: The Tea Room
- 16
- 28
- 9 August 2026 at 21:03
  Grizzly bear
- ELLIE the steam tram book – wanted
  Started by: apprentice in: Help and Assistance! (Offered or Wanted)
- 4
- 4
- 9 August 2026 at 15:18
  Bazyle
- Touch DRO Kit
  Started by: IanT in: Electronics in the Workshop
- 2
- 3
- 9 August 2026 at 14:55
  IanT
- IMLEC 2026
  Started by: Neil Wyatt in: Locomotives
- 1
- 1
- 9 August 2026 at 11:52
  Neil Wyatt
- The tea room
  Started by: larry phelan 1 in: General Questions
- 4
- 6
- 9 August 2026 at 08:37
  larry phelan 1
- Denford VMC 1300 CNC milling machine
  Started by: zoomer in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 6
- 11
- 8 August 2026 at 15:27
  John Haine
- SUSWE SU600A-2R2G1-B right mess
  Started by: tatler in: Electronics in the Workshop
- 5
- 10
- 8 August 2026 at 13:40
  tatler
- Decided to use castings
  Started by: BOB BLACKSHAW 1 in: General Questions
- 9
- 17
- 8 August 2026 at 13:36
  BOB BLACKSHAW 1
- Sealed Lead-Acid Battery 1 2
  Started by: Michael Gilligan in: Electronics in the Workshop
- 9
- 31
- 8 August 2026 at 07:25
  John Haine
- 2 BA steel nuts
  Started by: vintagengineer in: Materials
- 1
- 1
- 7 August 2026 at 18:18
  vintagengineer
- Sieg X3 Mill Toothed Belt
  Started by: Keith Rogers 2 in: Help and Assistance! (Offered or Wanted)
- 4
- 9
- 7 August 2026 at 11:10
  Keith Rogers 2

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

August 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies