WARD CAPSTAN LATHE

This topic has 8 replies, 6 voices, and was last updated 7 January 2018 at 17:49 by Nidal Sultan.

Viewing 9 posts - 1 through 9 (of 9 total)

Author

Posts
29 July 2017 at 09:43 #309301
CHARLES lipscombe
Participant
@charleslipscombe16059
Does anyone have or know where I can obtain information about a Ward 2C capstan lathe?

In particular, how does a Ward 2C differ from a Ward 2A
Advert

29 July 2017 at 09:43 #25399
CHARLES lipscombe
Participant
@charleslipscombe16059
29 July 2017 at 09:54 #309304
Ady1
Participant
@ady1
The Ward 2C was the upgraded more modern version of the Ward 2A I believe

Information on them is pretty hard to find, have you gone and bought one? got any piccies?

Edited By Ady1 on 29/07/2017 09:57:40
29 July 2017 at 10:38 #309312
Nick_G
Participant
@nick_g
.

A friend of mine has 5 capstans in his workshop. They are a mixture of Herberts and Wards. I will see if any are a 2C and if he has a manual for it as I know he has a filing cabinet full of manuals for different machines.

Nick
29 July 2017 at 23:25 #309392
CHARLES lipscombe
Participant
@charleslipscombe16059
Thanks Ady and Nick,

Yes I have bought one, notionally to make some of the parts for a small range of vintage and veteran motorcycle fittings that I make.In reality more for the fun of using it and to save such a lovely bit of gear from being scrapped.

It is marked B.O.C. (British Oxygen Co.) and I surmise they were the original owners and the machine was sold new here in Australia.

As far as I can tell from the literature I have it seems to have some of the features, but maybe not all, of a 2DS which is reasonably well known.

All my engineering knowledge is self-taught so I have to sort out the features as I go and the correct manual would be a big help.

I will take some photos but I then have to master how to get them on the forum – I have only done this before by using photobucket – which appears to have just about kicked the bucket for any use that I might have!

Regards, Chas
30 July 2017 at 07:30 #309405
Nicholas Farr
Participant
@nicholasfarr14254
Hi Chas, don't know if this is of any help, but here is a scan of a 2A data sheet.

There is a guide to posting photos **LINK**

Regards Nick.
30 July 2017 at 07:56 #309408
Neil Wyatt
Moderator
@neilwyatt
Posted by CHARLES lipscombe on 29/07/2017 23:25:22:

I will take some photos but I then have to master how to get them on the forum – I have only done this before by using photobucket – which appears to have just about kicked the bucket for any use that I might have!

Take a look here, Charles,

Neil

<edit> Nick beat me to it!

Edited By Neil Wyatt on 30/07/2017 07:57:23
30 July 2017 at 12:31 #309455
CHARLES lipscombe
Participant
@charleslipscombe16059
Hi to all,

Following the link provided by Neil and Nicholas, herewith photos of my lathe (hopefully!)

The left hand end of the lathe seems the same as a Ward 2DS but the capstan end seems to me to be the same as a Ward 2A. This post has not come out exactly as I hoped but practice should make perfect.

Regards, Chas
7 January 2018 at 17:49 #335760
Nidal Sultan
Participant
@nidalsultan76741
anybody knows where I can the rear 2 position cutting tool post for my Ward 2C? Couldn't find any on eBay.
Author

Posts