Lubricator tank

Lubricator tank

Home Forums Locomotives Lubricator tank

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #142112
    clivel
    Participant
      @clivel

      Hi,

      Having completed the mechanisms for the lubricators specified for a 5" gauge Railmotor, I now need to make up the tanks. These are 1 3/4" x 1 1/4" x 1" tall and as they are quite visible on the running boards, I would like to ensure a neat job.

      I have managed to obtain sufficient 1/32" brass sheet described as "half hard" which I hope is suitable, but I am now at a loss as to how to proceed to actually fold up and solder the tank.

      Any advice would be appreciated,

      Thanks,

      Clive

      #1249
      clivel
      Participant
        @clivel
        #142237
        julian atkins
        Participant
          @julianatkins58923

          hi clive,

          make an oblong for the tank sides with a slight overlap on the join. belt it round a wooden former. clamp the join and square off the bottom by filing then rubbing on coarse wet and dry. flux up and add the bottom plate then silver solder all in one go. then finish the top and base plate to size.

          cheers,

          julian

          #142337
          clivel
          Participant
            @clivel

            Hi Julian,

            Thanks, I will give it a bash over the weekend,

            Clive

          Viewing 4 posts - 1 through 4 (of 4 total)
          • Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

          Latest Replies

          Home Forums Locomotives Topics

          Viewing 25 topics - 1 through 25 (of 25 total)
          Viewing 25 topics - 1 through 25 (of 25 total)

          View full reply list.