Boxford change wheel – bore size?

This topic has 5 replies, 3 voices, and was last updated 14 July 2013 at 22:15 by Keith Long.

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
14 July 2013 at 08:37 #12156
Keith Long
Participant
@keithlong89920
Advert

14 July 2013 at 08:37 #124520
Keith Long
Participant
@keithlong89920
Hi

Can anyone please advise me what the bore size is on change wheels for the Boxford lathes? I know they are 18dp and I assume 14.5deg.pa, but I can't find the hole size anywhere.

Thank you

Keith
14 July 2013 at 09:07 #124524
Saxalby
Participant
@saxalby
Hi Keith,

Just measured mine and the gear bore is 9/16 inch.
14 July 2013 at 09:09 #124525
Keith Long
Participant
@keithlong89920
Many thanks for that – as far as I'm concerned that's the perfect size – means I can fit them to my lathe which is something totally different!

Keith
14 July 2013 at 21:32 #124575
Robbo
Participant
@robbo
Keith, you are also correct to assume a pa of 14.5 degrees for the changewheels, though some fixed gearing in later models was changed to 20 deg.
14 July 2013 at 22:15 #124579
Keith Long
Participant
@keithlong89920
Thank you for confirming the pa, that really is one of the specifications that's difficult to check – especially by just a visual inspection.
Author

Posts

Viewing 6 posts - 1 through 6 (of 6 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Model Turbines 1 2 … 26 27
  Started by: Turbine Guy in: Stationary engines
- 28
- 664
- 5 November 2026 at 20:02
  Turbine Guy
- Building the V-Twin “Kelsey” 1 2 … 4 5
  Started by: JasonB in: Stationary engines
- 18
- 123
- 5 November 2026 at 19:20
  Jim Nic
- BCA MK III Jig Borer
  Started by: pjh in: Help and Assistance! (Offered or Wanted)
- 7
- 10
- 5 November 2026 at 19:19
  duncan webster 1
- Minnie Traction Engine – Damper Hinge Plate
  Started by: Dominic Bramley in: Traction engines
- 6
- 15
- 5 November 2026 at 18:56
  Dominic Bramley
- New Mystery Lathe
  Started by: mart7mcfl7 in: Manual machine tools
- 2
- 3
- 5 November 2026 at 18:42
  mart7mcfl7
- Richard Simmonds’ “How To Make A Weight Driven Clock”
  Started by: iacooper in: Clocks and Scientific Instruments
- 7
- 11
- 5 November 2026 at 18:17
  iacooper
- Onshape Learning
  Started by: BOB BLACKSHAW 1 in: CAD – Technical drawing & design
- 5
- 11
- 5 November 2026 at 18:05
  Engine Builder
- Unimat 3 baseplate
  Started by: mart7mcfl7 in: Manual machine tools
- 4
- 9
- 5 November 2026 at 17:41
  mart7mcfl7
- WAR FINISH
  Started by: Speedy Builder5 in: The Tea Room
- 11
- 12
- 5 November 2026 at 16:58
  not done it yet
- Richard B’s Minnie. 1 2
  Started by: Richard B in: Traction engines
- 4
- 26
- 5 November 2026 at 16:30
  Richard B
- Unusual dual speed pulley on motor
  Started by: gerry madden in: Manual machine tools
- 10
- 17
- 5 November 2026 at 16:28
  Macolm
- Most used ‘rubbish’ tool
  Started by: jaCK Hobson in: The Tea Room
- 9
- 12
- 5 November 2026 at 14:43
  Vic
- Shape of Boxford fixed steady blocks
  Started by: Grindstone Cowboy in: Beginners questions
- 7
- 9
- 5 November 2026 at 14:12
  Grindstone Cowboy
- A small Hobbing Machine
  Started by: Michael Gilligan in: Workshop Tools and Tooling
- 3
- 5
- 5 November 2026 at 14:08
  Michael Gilligan
- Micrometer ratchets
  Started by: Graeme Seed in: Workshop Tools and Tooling
- 11
- 17
- 5 November 2026 at 13:09
  Graeme Seed
- Mitotoyo dial caliper battery or innards.
  Started by: Clive Farrar in: General Questions
- 10
- 12
- 5 November 2026 at 09:01
  Hollowpoint
- 3d Printed Carriage Stop for Warco WM180
  Started by: James A in: Workshop Tools and Tooling
- 1
- 1
- 5 November 2026 at 07:51
  James A
- Mitutoyo Dial Calliper dial?
  Started by: Bo’sun in: Workshop Tools and Tooling
- 4
- 7
- 4 November 2026 at 22:03
  Pete
- SOLIDWORKS for MAKERS
  Started by: Paul Lousick in: CAD – Technical drawing & design
- 2
- 3
- 4 November 2026 at 21:54
  Paul Lousick
- 127t Gear With ⅞” Shaft and Keyway – Which Lathe?
  Started by: Captain Barnacles in: Workshop Tools and Tooling
- 15
- 24
- 4 November 2026 at 19:56
  Captain Barnacles
- What Did You Do Today 2026 1 2 … 9 10
  Started by: JasonB in: The Tea Room
- 56
- 247
- 4 November 2026 at 17:50
  Nigel Graham 2
- help please in identifying
  Started by: John Holloway in: General Questions
- 4
- 9
- 4 November 2026 at 16:43
  renardiere7
- Mini ER11 milling/drilling unit
  Started by: YouraT in: Manual machine tools
- 5
- 9
- 4 November 2026 at 12:05
  bernard towers
- Lathe improvements? 1 2 … 5 6
  Started by: Niels Abildgaard in: Manual machine tools
- 24
- 130
- 4 November 2026 at 09:14
  Niels Abildgaard
- What aluminium sizes do you regularly use in your workshop?
  Started by: aytact in: Manual machine tools
- 6
- 6
- 4 November 2026 at 09:11
  AStroud

Boxford change wheel – bore size?

Boxford change wheel – bore size?

Latest Replies

Latest Issue

November 2026

Newsletter Sign-up

Latest Replies