Raglan vertical milling machine

[roger kerryParticipant @rogerkerry44257]

Hi

I have inherited the above mentioned machine, however its been stripped by previous owner. Can anyone offer any help regarding re-building.?? any instructions or schematics would be most helpful.

Many thanks

Roger

[roger kerryParticipant @rogerkerry44257]

overhaul

[david homerParticipant @davidhomer12226]

Hi

There are a couple of yahoo groups which cover Raglan lathes and mills, if you have not already seen them.

Might be worth looking and asking there, the link below is to one of them.

https://groups.yahoo.com/neo/groups/RaglanMachineTools2/info

David

[RobboParticipant @robbo]

And the other **LINK**

[RobboParticipant @robbo]

This (rather crude) drawing may help:

[Tractor manParticipant @tractorman]

Hi Roger I stripped and rebuilt mine no problems. You just need tiny hands to get in the head and motor housings.
If you get stuck message me. Mick

[roger kerryParticipant @rogerkerry44257]

many thanks to all.

Roger

[geoff warner 1Participant @geoffwarner1]

hi guys

has anyone a wiring diagram for a raglan mill 2 speed motor connections please

 

geoff w

[geoff warner 1Participant @geoffwarner1]

hi roger

did you manage to build your raglan milling machine was it a single or two speed machine

regards geoff

[bernard towersParticipant @bernardtowers37738]

Which mills had a two speed motor mine is single phase varispeed.

[Author]

Posts