Myford Super 7 tumbler gears removal

[sparky mikeParticipant @sparkymike]

Hi,

How are the Tufnel tumbler gears held on to the lever.? Are they pushed on or screwed on? I need to remove them to strip the paint on the lever.

Mike.

[sparky mikeParticipant @sparkymike]

[John Stevenson 1Participant @johnstevenson1]

The pins are pressed in.

[sparky mikeParticipant @sparkymike]

Thanks John.

I needed to know as I did not want to damage anything by incorrect removal.

Mike.

[Tom MarkramParticipant @tommarkram37446]

Hi guys,>>

Sorry for pitching in like this, but how do you remove the tumbler from the frame? >>

I cannot find any form of pin holding the tumbler stud in place? >>

any help would be greatly appreciated

thanx

Tom

[sparky mikeParticipant @sparkymike]

Hi Tom,

If you mean the complete tumbler reverse lever and gears, there is a screw at the rear of the headstock

which locates in a groove on the reverse lever shaft.. I can take a photo of all the disassembled parts if you want.

Mike.

[Author]

Posts