The world of model and hobby engineering
Forums
Help
Register
Log in
Home › Forums › Introduce Yourself – New members start here! › Morning from the Midlands
Good morning All,
Finally registered after years of looking I decided it was time to get a bit more involved! I am a Rail Engineer and volunteer on Welsh Narrow Gauge railways as well – and 7 1/4 loco owner too.
Best wishes,
Rich
Welcome to this excellent forum Rich. I must admit that I'm more road vehicle than rail but there are bound to be other members along soon.
Brian
Welcome to the forum from a 'west midlander'
H
Welcome from an East Midlander and ex rail engineer (retired)
Gren.
Welcome along Richard from another Midlander.
Evening from the East Midlands
Edited By Old School on 11/10/2019 21:58:21
Richard, which bit of the Midlands are you in ? May be useful to know if you are searching for something one day. Chris.
Welcome to the Forum Richard,
Neil
Welcome! Whatever part of the Midlands you are from.
Grew up and started work in the West Midlands, but have been in East Anglia for many years.
You'll find the Forum interesting, not to say addictive.
LOTS of info to be found on here!
Howard
Home › Forums › Introduce Yourself – New members start here! › Topics
Started by: JohnF in: Workshop Tools and Tooling
Nigel Graham 2
Started by: Captain Barnacles in: Workshop Tools and Tooling
not done it yet
Started by: YouraT in: Manual machine tools
YouraT
Started by: John Purdy in: Clocks and Scientific Instruments
John Haine
Started by: gerry madden in: Manual machine tools
Versaboss
Started by: JA in: The Tea Room
Mark Rand
Started by: paul1956 in: Beginners questions
paul1956
Started by: Danni Burns in: Manual machine tools
Howard Lewis
Started by: BOB BLACKSHAW 1 in: 3D Printers and 3D Printing
Started by: Sonic Escape in: General Questions
old mart
Started by: Mark Davison 1 in: Clocks and Scientific Instruments
roy entwistle
Started by: Sonic Escape in: The Tea Room
Sonic Escape
Started by: JasonB in: The Tea Room
duncan webster 1
Started by: Vic in: Workshop Tools and Tooling
File Handle
Started by: Peter Venn in: General Questions
Bill Dawes
Started by: Phil Whitley in: The Tea Room
Phil Whitley
Started by: Rainbows in: Workshop Tools and Tooling
JasonB
Started by: Adam Harris in: Workshop Tools and Tooling
Started by: duncan webster 1 in: CAD – Technical drawing & design
Started by: Ramon Wilson in: Exhibitions, Shows and Club Events
JA
Started by: Ger in: Manual machine tools
derek hall 1
Started by: Bo’sun in: Workshop Tools and Tooling
JohnF
Started by: Andy Stopford in: General Questions
Andy Stopford
Started by: davidsewell in: Beginners questions
vic newey
View full reply list.