ME Issue 3495 August 1974

This topic has 4 replies, 3 voices, and was last updated 4 June 2016 at 08:38 by Neil Wyatt.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
3 June 2016 at 19:13 #241316
Neil Wyatt
Moderator
@neilwyatt
Could anyone with a copy of this issue in good condition and the facilities to scan an article drop me a PM please?

Many thanks,

Neil
Advert

3 June 2016 at 19:13 #32711
Neil Wyatt
Moderator
@neilwyatt
3 June 2016 at 19:39 #241317
alan ord 2
Participant
@alanord2
Hi Neil, I have sent you a PM.

Alan.
3 June 2016 at 21:31 #241334
john hill 9
Participant
@johnhill9
Hi Neil, I've sent you a PM as well.

John.
4 June 2016 at 08:38 #241358
Neil Wyatt
Moderator
@neilwyatt
Many thanks to the four people who have generously offered to help, I will reply individually as well.

Neil
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Mitotoyo dial caliper battery or innards.
  Started by: Clive Farrar in: General Questions
- 11
- 13
- 6 November 2026 at 10:39
  martin haysom
- Stepper Motor for Leadscrew
  Started by: James A in: Workshop Tools and Tooling
- 5
- 5
- 6 November 2026 at 09:59
  JasonB
- Blank posts in forum
  Started by: Mark Rand in: New Forum Software questions, comments and Test Threads
- 7
- 8
- 6 November 2026 at 09:51
  JasonB
- Onshape Learning
  Started by: BOB BLACKSHAW 1 in: CAD – Technical drawing & design
- 6
- 14
- 6 November 2026 at 09:17
  BOB BLACKSHAW 1
- Warco GH600 Upgrades (DRO and Bed Protection)
  Started by: Richard Kirkman 1 in: Work In Progress and completed items
- 4
- 13
- 6 November 2026 at 09:17
  Richard Kirkman 1
- Richard Simmonds’ “How To Make A Weight Driven Clock”
  Started by: iacooper in: Clocks and Scientific Instruments
- 8
- 15
- 6 November 2026 at 09:08
  Andrew Crow
- New Mystery Lathe
  Started by: mart7mcfl7 in: Manual machine tools
- 4
- 10
- 6 November 2026 at 00:47
  mart7mcfl7
- 2inch Fowler plans
  Started by: bob53page in: Traction engines
- 6
- 11
- 5 November 2026 at 20:56
  JasonB
- Model Turbines 1 2 … 26 27
  Started by: Turbine Guy in: Stationary engines
- 28
- 664
- 5 November 2026 at 20:02
  Turbine Guy
- Building the V-Twin “Kelsey” 1 2 … 4 5
  Started by: JasonB in: Stationary engines
- 18
- 123
- 5 November 2026 at 19:20
  Jim Nic
- BCA MK III Jig Borer
  Started by: pjh in: Help and Assistance! (Offered or Wanted)
- 7
- 10
- 5 November 2026 at 19:19
  duncan webster 1
- Minnie Traction Engine – Damper Hinge Plate
  Started by: Dominic Bramley in: Traction engines
- 6
- 15
- 5 November 2026 at 18:56
  Dominic Bramley
- Unimat 3 baseplate
  Started by: mart7mcfl7 in: Manual machine tools
- 4
- 9
- 5 November 2026 at 17:41
  mart7mcfl7
- WAR FINISH
  Started by: Speedy Builder5 in: The Tea Room
- 11
- 12
- 5 November 2026 at 16:58
  not done it yet
- Richard B’s Minnie. 1 2
  Started by: Richard B in: Traction engines
- 4
- 26
- 5 November 2026 at 16:30
  Richard B
- Unusual dual speed pulley on motor
  Started by: gerry madden in: Manual machine tools
- 10
- 17
- 5 November 2026 at 16:28
  Macolm
- Most used ‘rubbish’ tool
  Started by: jaCK Hobson in: The Tea Room
- 9
- 12
- 5 November 2026 at 14:43
  Vic
- Shape of Boxford fixed steady blocks
  Started by: Grindstone Cowboy in: Beginners questions
- 7
- 9
- 5 November 2026 at 14:12
  Grindstone Cowboy
- A small Hobbing Machine
  Started by: Michael Gilligan in: Workshop Tools and Tooling
- 3
- 5
- 5 November 2026 at 14:08
  Michael Gilligan
- Micrometer ratchets
  Started by: Graeme Seed in: Workshop Tools and Tooling
- 11
- 17
- 5 November 2026 at 13:09
  Graeme Seed
- 3d Printed Carriage Stop for Warco WM180
  Started by: James A in: Workshop Tools and Tooling
- 1
- 1
- 5 November 2026 at 07:51
  James A
- Mitutoyo Dial Calliper dial?
  Started by: Bo’sun in: Workshop Tools and Tooling
- 4
- 7
- 4 November 2026 at 22:03
  Pete
- SOLIDWORKS for MAKERS
  Started by: Paul Lousick in: CAD – Technical drawing & design
- 2
- 3
- 4 November 2026 at 21:54
  Paul Lousick
- 127t Gear With ⅞” Shaft and Keyway – Which Lathe?
  Started by: Captain Barnacles in: Workshop Tools and Tooling
- 15
- 24
- 4 November 2026 at 19:56
  Captain Barnacles
- What Did You Do Today 2026 1 2 … 9 10
  Started by: JasonB in: The Tea Room
- 56
- 247
- 4 November 2026 at 17:50
  Nigel Graham 2

ME Issue 3495 August 1974

ME Issue 3495 August 1974

Latest Replies

Latest Issue

November 2026

Newsletter Sign-up

Latest Replies