Mail failure when using the site interface

Mail failure when using the site interface

This topic has 4 replies, 4 voices, and was last updated 18 April 2014 at 15:54 by JasonB.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
18 April 2014 at 12:36 #39319
_Paul_
Participant
@_paul_
Advert

18 April 2014 at 12:36 #150082
_Paul_
Participant
@_paul_
Has anyone else suffered this type of failure when trying to send mail using this sites tools?
18 April 2014 at 13:12 #150089
Lee Wood 2
Participant
@leewood2
No but I have had a few problems with members trying to contact me
18 April 2014 at 13:45 #150092
Neil Wyatt
Moderator
@neilwyatt
No, but i encountered a different error the other day.

The IT support are off for Easter, but I'll raise a bug report.

Neil
18 April 2014 at 15:54 #150099
JasonB
Moderator
@jasonb
Neil this came up ages ago when classified adds would not allow the e-mail, DC1 said it was due to the way the person placing the add had entered their details.

J
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Taylor Hobson Pantograph Engraver Model D 1 2
  Started by: jaCK Hobson in: Workshop Tools and Tooling
- 8
- 32
- 17 June 2026 at 18:02
  jaCK Hobson
- Green Dragon Sustainable Fuel
  Started by: Neil Wyatt in: Locomotives
- 10
- 14
- 17 June 2026 at 17:53
  noel shelley
- Greetings
  Started by: dee in: Introduce Yourself – New members start here!
- 5
- 5
- 17 June 2026 at 17:46
  noel shelley
- Linear encoders
  Started by: Speedy Builder5 in: Electronics in the Workshop
- 13
- 25
- 17 June 2026 at 15:53
  Speedy Builder5
- Lightning 1 2 3
  Started by: duncan webster 1 in: Electronics in the Workshop
- 14
- 52
- 17 June 2026 at 15:26
  duncan webster 1
- How Good Are 3D Printers? 1 2
  Started by: Neil Wyatt in: 3D Printers and 3D Printing
- 14
- 28
- 17 June 2026 at 14:36
  Neil Wyatt
- Lathe cutting aggressive taper
  Started by: Lee Kennedy in: Manual machine tools
- 13
- 16
- 17 June 2026 at 13:04
  alecs
- Orbital – Not your Usual Oscillator!
  Started by: JasonB in: Stationary engines
- 12
- 19
- 17 June 2026 at 12:50
  duncan webster 1
- AJ Reeves 5 inch driving trolley bogies
  Started by: Ian R in: Locomotives
- 3
- 7
- 17 June 2026 at 08:25
  Ian R
- Axle pin question – choice of material and possible need for case hardening?
  Started by: barryblundell in: Materials
- 5
- 10
- 17 June 2026 at 01:19
  howardb
- ML7 – Zeroing the Topslide? 1 2
  Started by: Dr_GMJN in: Workshop Techniques
- 21
- 35
- 16 June 2026 at 22:18
  ega
- upgrade of Alibre Atom 3D
  Started by: David George 1 in: CAD – Technical drawing & design
- 4
- 5
- 16 June 2026 at 19:31
  David Jupp
- Warco DNC18 Mill/Digital Dream controllers
  Started by: Pippin in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 9
- 18
- 16 June 2026 at 15:44
  Derek cottiss
- My adventures with a bench top CNC mill 1 2 3
  Started by: John Hinkley in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 8
- 68
- 16 June 2026 at 12:10
  John Hinkley
- Steam Engine
  Started by: steven49 in: Introduce Yourself – New members start here!
- 1
- 1
- 16 June 2026 at 09:35
  steven49
- KMO RETROL 1/4 Scale Lister D Engine with some Mods.
  Started by: Blue Heeler in: I/C Engines
- 2
- 4
- 16 June 2026 at 04:46
  Blue Heeler
- Wallace valvegear simulator
  Started by: Kevan Shaw in: General Questions
- 7
- 24
- 15 June 2026 at 19:29
  John Purdy
- Replacement Allbrit Draftmaster Protractor Rulers
  Started by: wigan2026 in: Workshop Tools and Tooling
- 7
- 14
- 15 June 2026 at 18:06
  Grindstone Cowboy
- Commercial ads in classified
  Started by: Andrew Tinsley in: General Questions
- 2
- 2
- 15 June 2026 at 15:48
  JasonB
- Super Simplex Build
  Started by: Peter Hoerlein in: Work In Progress and completed items
- 7
- 18
- 15 June 2026 at 07:08
  Peter Hoerlein
- Running 380V 3-phase motor on 230V 1-phase
  Started by: jimalm in: Electronics in the Workshop
- 13
- 25
- 14 June 2026 at 21:24
  Julie Ann
- Taper Identification
  Started by: Andrew Tinsley in: Workshop Tools and Tooling
- 2
- 2
- 14 June 2026 at 20:46
  Chris Crew
- Testing Single Point Thread Fitment
  Started by: berwick in: Beginners questions
- 12
- 16
- 14 June 2026 at 10:18
  alecs
- What Did You Do Today 2026 1 2 … 4 5
  Started by: JasonB in: The Tea Room
- 34
- 115
- 13 June 2026 at 15:38
  Dalboy
- Hindu ascetic in picture gallery
  Started by: Bill Phinn in: Website Questions, Comments, and Suggestions
- 3
- 3
- 13 June 2026 at 15:37
  Neil Wyatt

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

May 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies