Hi all

Hi all

This topic has 4 replies, 4 voices, and was last updated 21 July 2019 at 09:25 by roy entwistle.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
20 July 2019 at 20:51 #420065
Rex Spencer
Participant
@rexspencer20354
I work as a weaver on old looms that need lots of love to keep them running. They are old cast iron power looms from the 1940s.
Advert

20 July 2019 at 20:51 #40579
Rex Spencer
Participant
@rexspencer20354
Rebuilding looms.
21 July 2019 at 07:33 #420088
Brian H
Participant
@brianh50089
Hello Rex and welcome. Is your work in a commercial concern or a museum type of operation?

Any chance of a picture of one of the looms?

Brian
21 July 2019 at 07:49 #420092
David George 1
Participant
@davidgeorge1
Hi Rex welcome to the forum what machinery do you have to help repair these with.

David
21 July 2019 at 09:25 #420098
roy entwistle
Participant
@royentwistle24699
Hello Rex Where about in the country are you ?

Roy
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Drive coil ampere turns for seconds pendulum 1 2
  Started by: carlw in: Clocks and Scientific Instruments
- 6
- 29
- 20 September 2026 at 19:48
  carlw
- New Myford 7 DRO article
  Started by: Bob Worsley in: Electronics in the Workshop
- 7
- 22
- 20 September 2026 at 19:34
  John P
- Crucible Furnace
  Started by: BOB BLACKSHAW 1 in: General Questions
- 5
- 6
- 20 September 2026 at 19:29
  howardb
- Harrison L5 mk2 or not
  Started by: sean logie in: Workshop Tools and Tooling
- 4
- 4
- 20 September 2026 at 19:22
  Andy Stopford
- Doorbells
  Started by: Michael Gilligan in: The Tea Room
- 5
- 9
- 20 September 2026 at 17:50
  Michael Gilligan
- Arc closure and popularity of Chineese lathes
  Started by: File Handle in: The Tea Room
- 5
- 6
- 20 September 2026 at 17:46
  old mart
- Ideas needed for problem wth Tom Senior E type Mill
  Started by: Mike Crossfield in: Manual machine tools
- 9
- 16
- 20 September 2026 at 17:20
  blowlamp
- Milling machine spindle speed readout problem
  Started by: Steve Huckins in: General Questions
- 2
- 2
- 20 September 2026 at 15:10
  Clive Brown 1
- Suzanne
  Started by: Steve Huckins in: Work In Progress and completed items
- 4
- 7
- 20 September 2026 at 12:52
  Steve Huckins
- Mini lathes I need to look into
  Started by: mcenhillk in: Manual machine tools
- 14
- 18
- 20 September 2026 at 08:06
  Dell
- End mill sharpening 1 2
  Started by: petro1head in: General Questions
- 16
- 32
- 19 September 2026 at 23:30
  Nigel Graham 2
- My week this week! My workshop videos 1 2 … 13 14
  Started by: Phil Whitley in: The Tea Room
- 16
- 332
- 19 September 2026 at 19:24
  Phil Whitley
- … I had hoped we were growing-out of this nonsense ! 1 2
  Started by: Michael Gilligan in: The Tea Room
- 21
- 28
- 19 September 2026 at 17:37
  Howard Lewis
- Octopus Heat Pump 1 2 3 4
  Started by: Michael Gilligan in: The Tea Room
- 25
- 88
- 19 September 2026 at 16:30
  Macolm
- Machining inserts part numbers
  Started by: JA in: Workshop Tools and Tooling
- 6
- 8
- 19 September 2026 at 10:15
  JA
- Maxcut 5 – Arc Euro Trade
  Started by: Phil S in: Workshop Tools and Tooling
- 2
- 2
- 18 September 2026 at 22:32
  Nigel Graham 2
- What Did You Do Today 2026 1 2 … 7 8
  Started by: JasonB in: The Tea Room
- 48
- 184
- 18 September 2026 at 20:26
  Neil Wyatt
- 1904 Whitehead Vertical Gas Engine
  Started by: JasonB in: I/C Engines
- 4
- 15
- 18 September 2026 at 19:28
  JasonB
- Tom Thumb Toolpost Grinder
  Started by: Phil P in: Workshop Tools and Tooling
- 2
- 2
- 18 September 2026 at 15:30
  John Haine
- Sherline closing down
  Started by: Peter Cook 6 in: Manual machine tools
- 8
- 20
- 18 September 2026 at 13:04
  Peter Cook 6
- Model Engineer & Workshop 1 2
  Started by: Tony Watson 3 in: Model Engineer & Workshop
- 18
- 31
- 18 September 2026 at 12:55
  Neil Wyatt
- Building a 4″ traction engine
  Started by: Karl Tear in: Traction engines
- 11
- 24
- 18 September 2026 at 11:41
  Nigel Graham 2
- Su251-53 1 2
  Started by: parovoz in: Locomotives
- 14
- 28
- 18 September 2026 at 07:10
  Dave Wootton
- Denford Viceory TDS 1/1 GBL lathe
  Started by: sean logie in: General Questions
- 4
- 7
- 17 September 2026 at 20:55
  sean logie
- Have I got 12-28 UNF wrong or has Völkel? 1 2
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 12
- 30
- 17 September 2026 at 19:12
  peak4

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

October 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies