Hello

Hello

This topic has 6 replies, 6 voices, and was last updated 24 September 2020 at 12:22 by Neil Wyatt.

Viewing 7 posts - 1 through 7 (of 7 total)

Author

Posts
14 September 2020 at 23:52 #495830
Richard Collins 2
Participant
@richardcollins2
Currently working on a 3 1/2” Tom Thumb locomotive.
Advert

14 September 2020 at 23:52 #40904
Richard Collins 2
Participant
@richardcollins2
15 September 2020 at 07:33 #495838
David George 1
Participant
@davidgeorge1
Hi Tom welcome to the forum. There are loads of like minded steam enthusiasts on here and any help you can give eould be also most appreciated.

David
15 September 2020 at 08:32 #495851
Chris Evans 6
Participant
@chrisevans6
Welcome along Richard, a lot of knowledge is shared on this forum.
15 September 2020 at 14:39 #495924
Howard Lewis
Participant
@howardlewis46836
Welcome aboard.

Having read the previous posts, all we need is a Harry!

My name doesn't count!

This is the sort of thing that are likely to get as well as lots of good advice!

Howard
15 September 2020 at 15:49 #495936
Harry Wilkes
Participant
@harrywilkes58467
Welcome to the forum

H
24 September 2020 at 12:22 #497532
Neil Wyatt
Moderator
@neilwyatt
Welcome to the forum Richard.

Neil
Author

Posts

Viewing 7 posts - 1 through 7 (of 7 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- How to talk to an AI
  Started by: Alan Charleston in: The Tea Room
- 1
- 1
- 22 September 2026 at 07:22
  Alan Charleston
- Dividing head – compound indexing
  Started by: Bazyle in: Workshop Tools and Tooling
- 2
- 2
- 22 September 2026 at 07:19
  DC31k
- Ketan Swali 1 2 3
  Started by: Bill Davies 2 in: The Tea Room
- 45
- 55
- 21 September 2026 at 22:35
  Tony Jeffree
- Chinese EV teardown
  Started by: Michael Gilligan in: The Tea Room
- 4
- 4
- 21 September 2026 at 22:12
  peak4
- Free issues
  Started by: doreen hynes in: General Questions
- 4
- 5
- 21 September 2026 at 21:18
  Andrew Tinsley
- New Myford 7 DRO article 1 2
  Started by: Bob Worsley in: Electronics in the Workshop
- 8
- 29
- 21 September 2026 at 20:17
  Robert Atkinson 2
- Microscope eyepieces
  Started by: gerry madden in: Clocks and Scientific Instruments
- 6
- 10
- 21 September 2026 at 19:39
  peak4
- Ideas needed for problem wth Tom Senior E type Mill
  Started by: Mike Crossfield in: Manual machine tools
- 10
- 22
- 21 September 2026 at 18:32
  old mart
- Drive coil ampere turns for seconds pendulum 1 2
  Started by: carlw in: Clocks and Scientific Instruments
- 6
- 34
- 21 September 2026 at 18:20
  John Purdy
- The saga of the wayward SX2P mini mill
  Started by: Howi in: Manual machine tools
- 3
- 4
- 21 September 2026 at 17:24
  Robert Atkinson 2
- A little help
  Started by: leeco123 in: Introduce Yourself – New members start here!
- 3
- 4
- 21 September 2026 at 16:14
  leeco123
- Crucible Furnace
  Started by: BOB BLACKSHAW 1 in: General Questions
- 7
- 11
- 21 September 2026 at 16:07
  Engine Builder
- Computer advice needed
  Started by: JohnF in: The Tea Room
- 11
- 11
- 21 September 2026 at 13:42
  Wink Hackman
- Project anyone
  Started by: Dalboy in: General Questions
- 5
- 5
- 21 September 2026 at 13:29
  Bazyle
- Article about Steam Luanches
  Started by: dbs88 in: Model Engineer.
- 7
- 19
- 21 September 2026 at 11:39
  noel shelley
- Arc closure and popularity of Chineese lathes
  Started by: File Handle in: The Tea Room
- 7
- 8
- 21 September 2026 at 10:40
  Nicholas Farr
- The Big St Albans Model Show
  Started by: Bazyle in: Exhibitions, Shows and Club Events
- 1
- 1
- 21 September 2026 at 10:18
  Bazyle
- Tom Thumb Toolpost Grinder
  Started by: Phil P in: Workshop Tools and Tooling
- 3
- 3
- 21 September 2026 at 09:05
  JohnF
- Wilesco rebuild
  Started by: harryssteam in: Work In Progress and completed items
- 2
- 2
- 21 September 2026 at 08:14
  Nigel Bennett
- Octopus Heat Pump 1 2 3 4
  Started by: Michael Gilligan in: The Tea Room
- 25
- 89
- 21 September 2026 at 06:29
  Michael Gilligan
- Doorbells
  Started by: Michael Gilligan in: The Tea Room
- 7
- 13
- 21 September 2026 at 06:24
  Michael Gilligan
- Suzanne
  Started by: Steve Huckins in: Work In Progress and completed items
- 5
- 8
- 20 September 2026 at 21:25
  Engine Builder
- Bridgeport Milling Machine feed control module 1 2
  Started by: Mark Willis in: Workshop Tools and Tooling
- 14
- 26
- 20 September 2026 at 19:53
  niklas 1512
- Harrison L5 mk2 or not
  Started by: sean logie in: Workshop Tools and Tooling
- 4
- 4
- 20 September 2026 at 19:22
  Andy Stopford
- Milling machine spindle speed readout problem
  Started by: Steve Huckins in: General Questions
- 2
- 2
- 20 September 2026 at 15:10
  Clive Brown 1

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

October 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies