Good YouTube videos

[AdrianRParticipant @adrianr18614]

[AdrianRParticipant @adrianr18614]

Hi,

I find the videos made by Joe Pieczynski well worth watching. Lots of information about using the Mill and Lathe. Well worth subscribing.

Adrian

[EmgeeParticipant @emgee]

+1 for Joe

Emgee

[mark costello 1Participant @markcostello1]

Excellent videos and humbling.

[Graham StoppaniParticipant @grahamstoppani46499]

This Joe is new to me, thanks for the heads up. Another Joe I follow on YouTube is Cuppa Joe as he has made numerous modifications to a a round pillar mill/drill machine similar to the Warco Minor I own.

Cuppa Joe Channel

[Phil PParticipant @philp]

Stefan Gotteswinter is worth a look too.

Phil

[I.M. OUTAHEREParticipant @i-m-outahere]

This old Tony , marc lecuyer ( that lazy machinist ), clickspring and i could go on and on and on !

one tip is to look on the channel you are viewing and check to see who they are subscribed to if they are allowing you to check – thats how i found most of the channels i watch.. One guy i have been waiting for to come back to making videos is mr crispin .

Don’t forget our very own youtube mega stars Stubb mandrel , Mrjasonsb and home metalworking workshop (Harold Hall).

[Barnaby WildeParticipant @barnabywilde70941]

Will YooToob vids one day replace magazines???

I find that the biggest problem with them is "can they be respected".

i.e. If a noob picks up the idea that they want to become a model engineer, how on earth do they know that what they are watching on Yootoob is anywhere near close to how they should go about it?

Now if ME&MEW were to have a Yootoob channel . . . . . . . !

[Neil WyattModerator @neilwyatt]

Posted by Barnaby Wilde on 31/07/2019 19:57:56:

Now if ME&MEW were to have a Yootoob channel . . . . . . . !

Wait until I retire

Neil

[LainchyParticipant @lainchy]

For me, as a noob, I'm following "This Old Tony", Abom79, Blonidhacks, Learning Turning Metal (Our own Andrew Whale), Ade's Workshop, Keith Appleton… loads of great content.

I'm not sure any are teaching bad habits, I think it's a chance to look at all the ways it "can" be done, and then choosing a way that I'd like to follow. I think some things just don't make sense until you have your own tooling… take milling for example, Blondihacks has a great video on setting up the mill, and the tramming thing I kind of got, but last night I saw first hand why it's important on a piece of metal I was machining

Lots of great content.

[Mark Gould 1Participant @markgould1]

Joe Pie is indeed an excellent channel to watch. I also enjoy anything by Tom Lipton (Oxtools) and a young English man called Mr. Crispin.

[JimDParticipant @jimd42132]

I think you have all named everyone I watch.

Watching their videos does however fill me with a sense of ability that I quite clearly don't have yet but practice makes perfect.

[martin perman 1Participant @martinperman1]

Posted by Graham Stoppani on 30/07/2019 16:54:11:

This Joe is new to me, thanks for the heads up. Another Joe I follow on YouTube is Cuppa Joe as he has made numerous modifications to a a round pillar mill/drill machine similar to the Warco Minor I own.

Cuppa Joe Channel

I've subscribed to the above channel but cant find video's of round pillar mill drills, can somebody help pleas.

Martin P

[John BaguleyParticipant @johnbaguley78655]

Look for his videos about the 'Wrong Foo' mill

Others of interest:

Geoffrey Croker, Mustie1, Abom79, BigClivedotcom, Rolingmetal, Mark Presling, MrPete222, Randy Richard, Nick C Colyer, Steve Summers, Vortecks (builds insane electric bikes!), myfordboy, outsidescrewball, ROBRENZ, James Kilroy, Winky's Workshop, Halligan142, The Backyard Machine Shop, Old Iron Lover, Everett's Workshop, BasementShopGuy, etc.

No wonder I get nothing done!

John

[martin perman 1Participant @martinperman1]

John,

Than you for that, I've just watched the @wrong Foo' mill and I have exactly the same mill, with some tiny differences, very interesting.

Martin P

[Adam ArmstrongParticipant @adamarmstrong38447]

Mr Crispin is awesome. His new workshop looks like it's going to be incredible. I believe he's also a machinist at Rolls Royce aero engines.

[Phil WhitleyParticipant @philwhitley94135]

Don't think anyone has mentioned one of my favourites, "old steam powered machine shop" Amazing, and very practical!

[Mark Gould 1Participant @markgould1]

I’d like to add another member here who has an excellent youtube channel. His name is Craig and he’s making a loco as we speak. His youtube channel is no23mk2

[I.M. OUTAHEREParticipant @i-m-outahere]

Not sure if this channel has been mentioned on here before ( a search showed nothing ) but it has kept me amused for a few hours anyway!

Mostly old machine shop training videos.

There is one video on making a gear blank with a tapered bore- i don't know what the cutting fluid this guy was using ( looked like tar and probably toxic ) but i want some to play with !

https://www.youtube.com/channel/UCnfPxenwh-J_mSl2nUrKAHg

[not done it yetParticipant @notdoneityet]

As this thread has been resurrected (ie it has become ‘current&rsquo, I think the mods need to delete some of the youtube advertisers (of cheap rubbish from china) who promote items which now should come within the terms of the CoC.

I can see one name mentioned, who is ‘sponsored’ by one particular supplier of cheap rubbish (reject items as well as likely surplus goods).

[JasonBModerator @jasonb]

Sorted.

[I.M. OUTAHEREParticipant @i-m-outahere]

I didn't resurrect this thread for this whingeing crap ! I didn't want to start another youtube video thread either – i just thought this channel may provide some entertainment or education for those who wish to watch it .

What happened last year or the years before i don't care about as this is out of my control and i was really hoping for a more positive reaction from my post .

And just for the record i now double check that any links to youtube or any website that i provide do not or have not done any reviews that would be in contradiction to the COD on this forum .

[Tony Pratt 1Participant @tonypratt1]

Posted by XD 351 on 10/10/2020 07:02:51:

I didn't resurrect this thread for this whingeing crap ! I didn't want to start another youtube video thread either – i just thought this channel may provide some entertainment or education for those who wish to watch it .

What happened last year or the years before i don't care about as this is out of my control and i was really hoping for a more positive reaction from my post .

And just for the record i now double check that any links to youtube or any website that i provide do not or have not done any reviews that would be in contradiction to the COD on this forum .

[not done it yetParticipant @notdoneityet]

Whinging crap? My post was there to indicate a problem with the CoC, not your particular posting. But if the cap fits…. as they say….

JB clearly considered the point relevant and has removed a link, to at least one you-tuber, from this thread.

There is now no excuse (in the future), when someone transgresses the CoC on this point, to quote this thread as mitigation – because it contains links to inappropriate “employees’ of cheap rubbish sellers on internet selling platforms.

I particularly avoid those cheap sites that sell rejects or surpluses – unless I can afford to throw the items away if they are carp. Especially as their customer service is virtually non-existent. Advertising ‘through the back door’ has been oulawed on the forum. We now have a more level playing field for the good UK suppliers – even if the unit costs are, unsurprisingly, a little higher.

Perhaps you think that some of the forum advertisers/sponsors were whinging about the cheap competition from the rubbish suppliers? They were not – they were complaining of the free advertising on the forum afforded to these outlets – those who were often supplying unsafe (by european standards) kit – particularly wrt electrical safety/testing.

[Michael GilliganParticipant @michaelgilligan61133]

Posted by XD 351 on 10/10/2020 07:02:51:

[…]

i was really hoping for a more positive reaction from my post .

[…]

.

**LINK**

https://www.youtube.com/channel/UCnfPxenwh-J_mSl2nUrKAHg

Please accept my very positive reaction

Great link, thanks for posting it !!

MichaelG.

[Author]

Posts