Free inserts.

This topic has 41 replies, 21 voices, and was last updated 19 January 2021 at 17:22 by JasonB.

Viewing 25 posts - 1 through 25 (of 42 total)

1 2 →

Author

Posts
12 December 2020 at 12:44 #513074
Stephen Howard
Participant
@stephenhoward74297
Bought some bits and bobs from Banggood recently, and somehow managed to end up ordering the wrong inserts. Can't think how I managed it….other than confusing the tool shank size (12mm) with the insert size (9mm). I blame it on the Lidl Speyside malt.

Anyway, I now have 10 MACHIFIT CCGT120404 AK H01 inserts (for aluminium) that are no bloody use to me at all – so here's a Crimbo bonus for someone out there who can make use of them.

Just stick your virtual hand up in the replies below, and after a suitable period of time I'll pick a name and send them to the lucky winner, gratis.
UK folks only, please…I'm far too tight to cough for international shipping on a freebie…
Advert

12 December 2020 at 12:44 #36194
Stephen Howard
Participant
@stephenhoward74297
Doh!
12 December 2020 at 13:03 #513080
Alain Foote
Participant
@alainfoote90915
Count me in please Stephen.

thanks Alain
12 December 2020 at 13:06 #513081
Jager
Participant
@jager
Yes please!

Dave
12 December 2020 at 13:42 #513091
Clive Farrar
Participant
@clivefarrar90441
I would like to throw my titfer in the ring as well please.

Regards Clive
12 December 2020 at 13:45 #513092
Martin King 2
Participant
@martinking2
Me too please!

Martin
12 December 2020 at 13:50 #513093
Rik Shaw
Participant
@rikshaw
Stephan, can I go into the hat please.

Rik
12 December 2020 at 14:09 #513097
Nigel Graham 2
Participant
@nigelgraham2
Yes please!
12 December 2020 at 14:16 #513101
Richard Marks
Participant
@richardmarks80868
Me too Mr Stephen Sir.
12 December 2020 at 14:25 #513103
nigel jones 5
Participant
@nigeljones5
and me please…i just did the same and got the wrong size, if we swapped we would both be happy!
12 December 2020 at 14:31 #513107
Stephen Howard
Participant
@stephenhoward74297
Ach, that's tempting – but I said I'd give them away, so I'll stick to it.

Nice of you to offer though!
12 December 2020 at 15:05 #513119
David George 1
Participant
@davidgeorge1
Hi just seen this and thought I have a few specialised carbide bits made by Iscar. They are spare from when I did a proper job and I had thought I could use them but after a few years. I don't see me using them and as time goes on they will probably be superseded. Also free to a good home. You may have to buy or make an arbour to take them.

DCN drill head ICP-250 25mm diamiter.

DCN drill head ICP12.8-2M 8 off

ball nose milling head MM-EB200A15 20MM

David
12 December 2020 at 15:14 #513121
brian roberts 2
Participant
@brianroberts2
Please include me in the free draw – thanks.

Brian
12 December 2020 at 15:15 #513122
Paul L
Participant
@paull58212
I'll take you up on that offer please David

Im happy to pick up the postage

Paul
12 December 2020 at 15:16 #513123
brian roberts 2
Participant
@brianroberts2
David, i would be interested in these if still available please.

Regards,

Brian
12 December 2020 at 15:25 #513124
Henry Brown
Participant
@henrybrown95529
Very kind of you Stephen! I'd have thrown my hat in but I've just been given 20 from an engineering works that has closed down sadly…
12 December 2020 at 16:21 #513127
old mart
Participant
@oldmart
Next time, just buy a 16mm square tool and mill it down to 12mm height.
12 December 2020 at 17:02 #513131
Ian Hewson
Participant
@ianhewson99641
Hi, Me too please.
12 December 2020 at 17:14 #513133
Stephen Howard
Participant
@stephenhoward74297
Posted by old mart on 12/12/2020 16:21:02:

Next time, just buy a 16mm square tool and mill it down to 12mm height.

Another excuse to buy that mill I've got a hankering for!
12 December 2020 at 17:25 #513137
old mart
Participant
@oldmart
We had some 25mm Sandvik lathe tools at the museum before we had a mill, and I cut the first down by hand with a hacksaw and rubbed it to the tool height of 17.53mm by hand. It was hard work, and the second one got turned to the thickness in a four jaw chuck. They still get used.
12 December 2020 at 20:18 #513176
John Baron
Participant
@johnbaron31275
Hi David,

I wouldn't say no to one of the 20 mm ball nose cutters.

And you are not to far away from me, I'm near York.
14 December 2020 at 14:54 #513444
Stephen Howard
Participant
@stephenhoward74297
OK, I put the names into a pot and pulled out a lucky winner. It's Clive Farrar.

If you'd like to send me a message with your address, I'll get the inserts in the post to you.
15 December 2020 at 09:18 #513567
David George 1
Participant
@davidgeorge1
Shared out my spare carbide cutters to three members who contacted me. John Paul and Brian. Better than sat on top of my toolbox for a few more years unused.

David
15 December 2020 at 16:24 #513659
John Rudd
Participant
@johnrudd16576
Well done Clive, you lucky bu**er…😂😂👍

Edited By John Rudd on 15/12/2020 16:24:57
15 December 2020 at 22:02 #513705
Steviegtr
Participant
@steviegtr
Posted by David George 1 on 15/12/2020 09:18:34:

Shared out my spare carbide cutters to three members who contacted me. John Paul and Brian. Better than sat on top of my toolbox for a few more years unused.

David

You are a star David. I remember you helping me out in the past. You never know one day you may need something.

Steve.
Author

Posts