Electronics in the Road!

Electronics in the Road!

This topic has 5 replies, 4 voices, and was last updated 11 May 2015 at 21:13 by Neil Wyatt.

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
11 May 2015 at 19:01 #189500
Neil Wyatt
Moderator
@neilwyatt
It's been suggested that I share this with you all:
Advert

11 May 2015 at 19:01 #31789
Neil Wyatt
Moderator
@neilwyatt
11 May 2015 at 19:20 #189504
KWIL
Participant
@kwil
So its a solar power idea, so what?
11 May 2015 at 19:32 #189506
Martin Cottrell
Participant
@martincottrell21329
Fine if you can overcome the fact that our road network is bathed in darkness for probably 50% of the time, not to mention wet, cloudy days & being covered by an ever increasing abundance of traffic jams!

Regards, somewhat skeptically, Martin.
11 May 2015 at 19:49 #189508
JasonB
Moderator
@jasonb
All those illuminated road surfaces won't do your star gazing any good, just think of the light pollution.
11 May 2015 at 21:13 #189526
Neil Wyatt
Moderator
@neilwyatt
Think of the noise – a continuous rumble strip…

Wrong in so many ways…

Neil
Author

Posts

Viewing 6 posts - 1 through 6 (of 6 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Digital Leadscrew Lathes
  Started by: Chris Taylor 3 in: General Questions
- 1
- 1
- 19 June 2025 at 15:45
  Chris Taylor 3
- Enimat 3 – loose feed screw
  Started by: msrt7mcfl7 in: Workshop Tools and Tooling
- 2
- 2
- 19 June 2025 at 15:35
  Graham Meek
- Building Bernard Tekippe’s Precision Regulator 1 2 … 5 6
  Started by: Chris Raynerd 2 in: Clocks and Scientific Instruments
- 14
- 139
- 19 June 2025 at 13:29
  Chris Raynerd 2
- Bench vice
  Started by: Chris12 in: Workshop Tools and Tooling
- 16
- 20
- 19 June 2025 at 13:26
  Chris12
- ER25 Collet holder @ 2MT w/ 3/8″ BSW drawbar?
  Started by: William Ayerst in: Workshop Tools and Tooling
- 8
- 11
- 19 June 2025 at 12:27
  William Ayerst
- Is there an alternative to tufnol strip for springing
  Started by: steve2250 in: Beginners questions
- 7
- 11
- 19 June 2025 at 12:20
  Dave Wootton
- First cuts with the lathe 1 2
  Started by: Chris12 in: Beginners questions
- 17
- 33
- 19 June 2025 at 12:02
  noel shelley
- A new benchmark for cheap tat ?
  Started by: Michael Gilligan in: The Tea Room
- 2
- 5
- 19 June 2025 at 12:02
  Michael Gilligan
- Help Please: IT Not Engineering
  Started by: Nigel Graham 2 in: The Tea Room
- 5
- 9
- 19 June 2025 at 11:56
  SillyOldDuffer
- What Did You Do Today 2025 1 2 … 6 7
  Started by: JasonB in: The Tea Room
- 32
- 151
- 19 June 2025 at 10:59
  JasonB
- Twin Engineering’s heavy mill/drill quill removal
  Started by: Martin of Wick in: Manual machine tools
- 5
- 6
- 19 June 2025 at 10:14
  Pete
- Milling in the lathe – Vertical slide 1 2
  Started by: Chris12 in: Beginners questions
- 10
- 29
- 19 June 2025 at 10:12
  JasonB
- Unknown Colchester Lathe.
  Started by: Michael Butler 6 in: Workshop Tools and Tooling
- 2
- 2
- 19 June 2025 at 10:02
  bernard towers
- Rotary table question.
  Started by: larry phelan 1 in: Beginners questions
- 7
- 16
- 19 June 2025 at 08:51
  larry phelan 1
- How many spokes do I really need?
  Started by: Fulmen in: Related Hobbies including Vehicle Restoration
- 5
- 11
- 19 June 2025 at 08:20
  Fulmen
- 3 1/2” gauge diesel loco?
  Started by: Paul McDonough in: Locomotives
- 6
- 18
- 19 June 2025 at 07:47
  Paul McDonough
- Motorcycle starter motors – any general workshop uses?
  Started by: Robin Graham in: Beginners questions
- 10
- 14
- 18 June 2025 at 20:58
  John Haine
- How do they do that
  Started by: Speedy Builder5 in: The Tea Room
- 3
- 5
- 18 June 2025 at 20:39
  modeng2000
- Anybody with a Meddings Driltru bench drill or similar?
  Started by: Craig Brown in: Manual machine tools
- 4
- 5
- 18 June 2025 at 20:35
  Craig Brown
- VERY SAD NEWS
  Started by: Howard Lewis in: The Tea Room
- 7
- 8
- 18 June 2025 at 20:27
  Speedy Builder5
- 2″ DNY Compensating Gears
  Started by: grahamp in: Traction engines
- 3
- 5
- 18 June 2025 at 19:49
  grahamp
- Sieg C1 lathe autofeed and screw cutting 1 2
  Started by: Rob Athome in: Beginners questions
- 13
- 31
- 18 June 2025 at 19:40
  Howard Lewis
- Number series drills – history and origins 1 2
  Started by: clivel in: General Questions
- 30
- 48
- 18 June 2025 at 18:10
  Graham Meek
- Setting the top slide to turn a Morse taper
  Started by: John Purdy in: Workshop Tools and Tooling
- 13
- 15
- 18 June 2025 at 18:02
  larry phelan 1
- Rotary valve engine
  Started by: AStroud in: Work In Progress and completed items
- 2
- 2
- 18 June 2025 at 12:25
  John Haine

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

July 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies