Columbia – 3 1/2″ gauge Baldwin

[Wayne HewitsonParticipant @waynehewitson52643]

No sure if this is the best place to ask this question but I could not find a more suitable place so here it is.

 

I have downloaded part 1 of the “Columbia – 2 1/2″ gauge Baldwin” article and have decided I would likt to build this, however the downloaded article drawings are unreadable, very few of the dimensions are legable and before I subscribe to get part 2 of this I wanted to know if the subscribers versions of this are in fact ledgable.

 

There are many other articles I am hoping to find amougst the archives and I just wanted to know if they were useable or if they were of the same low and unreadable quality of the part one article.

 

Thanks for any help.

 

Wayne

 

[Wayne HewitsonParticipant @waynehewitson52643]

[AndyPParticipant @andyp13730]

They are all pretty similar Wayne although the GA in that first set is particularly bad – I guess they want us to buy the drawings.

 

Andy

[Author]

Posts