Boiler designer/maker wanted

Boiler designer/maker wanted

This topic has 2 replies, 2 voices, and was last updated 22 December 2013 at 11:28 by michael cole.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
22 December 2013 at 01:07 #138481
Geoff Stevenson
Participant
@geoffstevenson56049
Would anyone know a boiler designer/maker or have a VFT design suitable for a marine compound engine 1 1/4 + 2 1/4 x 2. Engine runs well under air in the 40-60psi range but I would expect better in steam. Thank you for any suggestions.. Geoff.
Advert

22 December 2013 at 01:07 #23026
Geoff Stevenson
Participant
@geoffstevenson56049
22 December 2013 at 11:28 #138503
michael cole
Participant
@michaelcole91146
The steamboat assocation of Great Britain is the place you need to go. There website

http://www.steamboatassocation.org.uk

They have a CD of aproved boiler desigins .

send me a PM if you need more info

Mike
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- What aluminium sizes do you regularly use in your workshop?
  Started by: aytact in: Manual machine tools
- 5
- 5
- 4 November 2026 at 08:38
  Thor 🇳🇴
- Mini ER11 milling/drilling unit
  Started by: YouraT in: Manual machine tools
- 5
- 8
- 4 November 2026 at 07:59
  YouraT
- Stronger Filament 1 2
  Started by: BOB BLACKSHAW 1 in: 3D Printers and 3D Printing
- 12
- 41
- 4 November 2026 at 07:23
  BOB BLACKSHAW 1
- help please in identifying
  Started by: John Holloway in: General Questions
- 4
- 6
- 4 November 2026 at 07:09
  JasonB
- SOLIDWORKS for MAKERS
  Started by: Paul Lousick in: CAD – Technical drawing & design
- 2
- 2
- 4 November 2026 at 07:00
  JasonB
- Micrometer ratchets
  Started by: Graeme Seed in: Workshop Tools and Tooling
- 9
- 9
- 4 November 2026 at 01:34
  Pete
- ML10 Dewhurst / Brook Crompton 1 2
  Started by: starjump in: Beginners questions
- 11
- 26
- 4 November 2026 at 00:07
  southernchap
- Mitotoyo dial caliper battery or innards.
  Started by: Clive Farrar in: General Questions
- 6
- 6
- 3 November 2026 at 22:00
  Pete
- Unusual dual speed pulley on motor
  Started by: gerry madden in: Manual machine tools
- 10
- 15
- 3 November 2026 at 21:47
  Macolm
- Mitutoyo Dial Calliper dial?
  Started by: Bo’sun in: Workshop Tools and Tooling
- 4
- 5
- 3 November 2026 at 20:54
  Pete
- SolidCraft Features.
  Started by: blowlamp in: CAD – Technical drawing & design
- 5
- 9
- 3 November 2026 at 19:39
  Andy Stopford
- Richard Simmonds’ “How To Make A Weight Driven Clock”
  Started by: iacooper in: Clocks and Scientific Instruments
- 6
- 7
- 3 November 2026 at 18:51
  iacooper
- What Did You Do Today 2026 1 2 … 9 10
  Started by: JasonB in: The Tea Room
- 56
- 245
- 3 November 2026 at 17:08
  duncan webster 1
- Torquay Manor 5 Gauge Frames
  Started by: Roy Birch in: Locomotives
- 6
- 8
- 3 November 2026 at 16:20
  Roy Birch
- Strange Clarkson Autolock Collet
  Started by: JohnF in: Workshop Tools and Tooling
- 12
- 16
- 3 November 2026 at 15:49
  Macolm
- 127t Gear With ⅞” Shaft and Keyway – Which Lathe?
  Started by: Captain Barnacles in: Workshop Tools and Tooling
- 15
- 23
- 3 November 2026 at 14:15
  Michael Gilligan
- Hemholtz coil positioning
  Started by: John Purdy in: Clocks and Scientific Instruments
- 4
- 21
- 3 November 2026 at 01:01
  peter1972
- Model Turbines 1 2 … 26 27
  Started by: Turbine Guy in: Stationary engines
- 28
- 663
- 2 November 2026 at 19:25
  Turbine Guy
- M7 Screws
  Started by: Vic in: Workshop Tools and Tooling
- 13
- 17
- 2 November 2026 at 18:34
  Georgineer
- LOWMEX Model Show
  Started by: Ramon Wilson in: Exhibitions, Shows and Club Events
- 6
- 14
- 2 November 2026 at 18:20
  mike T
- Bridge collapse 1 2
  Started by: JA in: The Tea Room
- 14
- 37
- 2 November 2026 at 17:22
  JA
- Carbide hand files?
  Started by: Rainbows in: Workshop Tools and Tooling
- 11
- 21
- 2 November 2026 at 12:33
  Fulmen
- Blackening brass
  Started by: paul1956 in: Beginners questions
- 5
- 7
- 1 November 2026 at 18:49
  paul1956
- Sealey SM17 Pwer Hacksaw
  Started by: Danni Burns in: Manual machine tools
- 2
- 2
- 1 November 2026 at 18:32
  Howard Lewis
- Inserts type for old milling cutter
  Started by: Sonic Escape in: General Questions
- 6
- 9
- 1 November 2026 at 16:38
  old mart

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

November 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies