31/2″ Canterbury Lamb building instructions

This topic has 17 replies, 8 voices, and was last updated 3 March 2021 at 01:37 by Willem van der Meijden.

Viewing 18 posts - 1 through 18 (of 18 total)

Author

Posts
9 January 2015 at 07:06 #175304
Robert Thompson 3
Participant
@robertthompson3
Hi all,

Does anybody have the "words and music" for the 31/2" Canterbury Lamb Invicta that i could purchase As described in Vol 107-108

Many Thanks

Bob Thompson
Advert

9 January 2015 at 07:06 #1356
Robert Thompson 3
Participant
@robertthompson3
9 January 2015 at 12:57 #175352
Weary
Participant
@weary
Mr Thompson,

I might be able to assist you. If you want, perhaps send me an email or Message through this site and I will get back to you. It may take me a couple of days to respond as somehow I have allowed real life to get in the way of model-engineering!

Regards,

Phil
9 January 2015 at 14:23 #175361
nigel jones 5
Participant
@nigeljones5
I dont, but having used the drawings as a basis for my near complete 7 1/4 I can tell you that there is a dimensional error relating to the line up of the valve chest linkagages/centrline, watch out for it!
9 January 2015 at 14:29 #175363
Robert Thompson 3
Participant
@robertthompson3
hi Fizzy Thanks for the warning

Regards

Bob
11 January 2015 at 00:44 #175541
nigel jones 5
Participant
@nigeljones5
and there's something amiss with the tender brake linkages….
11 January 2015 at 09:50 #175557
Robert Thompson 3
Participant
@robertthompson3
ok thanks for that
7 April 2020 at 06:16 #462886
Alan Littler 1
Participant
@alanlittler1
Hi just joined this site [ living in Australia] I am building a Canterbury Lamb does anyone know where I can obtain the construction article by LBSC in ME on this loco Many Thanks Alan
7 April 2020 at 08:08 #462900
Former Member
Participant
@formermember19781
[This posting has been removed]
7 April 2020 at 12:30 #462960
Former Member
Participant
@formermember19781
[This posting has been removed]
9 April 2020 at 00:40 #463377
Alan Littler 1
Participant
@alanlittler1
Many Thanks Bill the trouble is postage costs to Australia for the whole magazine I was trying to get just get hold of the construction notes only I know there was never a book on the loco like some of LBSC other designs so I `ll try some of the casting suppliers in your country.

Very sad about your losses yesterday due to Coronavirus,hopefully things will get better, regards Alan
9 April 2020 at 07:47 #463393
Former Member
Participant
@formermember19781
[This posting has been removed]
9 April 2020 at 09:13 #463407
Alan Littler 1
Participant
@alanlittler1
Sorry Bill got that wrong if you can help with the scans via email that would be fantastic, Many Thanks Alan
9 April 2020 at 10:02 #463413
Former Member
Participant
@formermember19781
[This posting has been removed]
10 April 2020 at 22:58 #463869
Alan Littler 1
Participant
@alanlittler1
Hi i joined this forum 3 days ago & asked about construction notes for LBSC Canterbury Lamb.I received an email the next day with help from Bill & a contact for Vic who had the relevant issues of ME , this morning all 17 issues arrived via email from the UK which I have printed.

I would like to express my greatest thanks to these guys for the assistance in my search & my thanks to ME for being able to do so in this forum .

Kindest regards Alan Littler Qld Australia
2 December 2020 at 12:23 #511211
Anonymous
Hi Can anybody help me with the LBSC words and music for Canterbury Lamb have been looking at the drawings and feel I need some guidance as to manufacture

Many thanks in advance

Keith
2 December 2020 at 17:20 #511246
Nick Clarke 3
Participant
@nickclarke3
Have sent a PM
3 March 2021 at 01:37 #531326
Willem van der Meijden
Participant
@willemvandermeijden80174
Hello I am Willem from Holland
I am also restoring an older Canterbury Lamb
Some parts are missing.
A scan of the issues of ME would be a great help!

Thanks in advance, Willem
Author

Posts