3 1/2 inch scale

3 1/2 inch scale

This topic has 6 replies, 6 voices, and was last updated 20 October 2020 at 22:14 by Brian H.

Viewing 7 posts - 1 through 7 (of 7 total)

Author

Posts
20 October 2020 at 20:05 #1973
Edward Myers
Participant
@edwardmyers51007
Royal Scot.
Advert

20 October 2020 at 20:05 #502336
Edward Myers
Participant
@edwardmyers51007
Hullo. My name is Edward Myers (88 yrs) I am at present building a 3 1/2 inch

Royal Scot to Henry Greenly designs.
20 October 2020 at 21:15 #502350
IanT
Participant
@iant
Hello Edward and welcome. That sounds like a great project.

You give me some hope that I might finish one or two of my engines too

Regards,

IanT
20 October 2020 at 21:19 #502351
Jon Lawes
Participant
@jonlawes51698
Hello Edward, a very elegant locomotive. Welcome.
20 October 2020 at 21:26 #502353
Harry Wilkes
Participant
@harrywilkes58467
Welcome to the forum

H
20 October 2020 at 22:02 #502363
Jeff Dayman
Participant
@jeffdayman43397
Hi Edward, welcome to the forum. Look forward to seeing / reading about your progress on the Royal Scot.
20 October 2020 at 22:14 #502366
Brian H
Participant
@brianh50089
Hello Edward and welcome. It's nice to know that someone is building to Henry Greenly designs. Are castings still available for Royal Scot?

Brian
Author

Posts

Viewing 7 posts - 1 through 7 (of 7 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Mini lathes I need to look into
  Started by: mcenhillk in: Manual machine tools
- 13
- 14
- 19 September 2026 at 21:44
  Robert Atkinson 2
- My week this week! My workshop videos 1 2 … 13 14
  Started by: Phil Whitley in: The Tea Room
- 16
- 332
- 19 September 2026 at 19:24
  Phil Whitley
- Arc closure and popularity of Chineese lathes
  Started by: File Handle in: The Tea Room
- 3
- 4
- 19 September 2026 at 18:02
  File Handle
- … I had hoped we were growing-out of this nonsense ! 1 2
  Started by: Michael Gilligan in: The Tea Room
- 21
- 28
- 19 September 2026 at 17:37
  Howard Lewis
- Octopus Heat Pump 1 2 3 4
  Started by: Michael Gilligan in: The Tea Room
- 25
- 88
- 19 September 2026 at 16:30
  Macolm
- New Myford 7 DRO article
  Started by: Bob Worsley in: Electronics in the Workshop
- 7
- 20
- 19 September 2026 at 14:09
  Michael Gilligan
- Suzanne
  Started by: Steve Huckins in: Work In Progress and completed items
- 4
- 6
- 19 September 2026 at 14:06
  Dalboy
- End mill sharpening 1 2
  Started by: petro1head in: General Questions
- 16
- 31
- 19 September 2026 at 13:10
  JasonB
- Drive coil ampere turns for seconds pendulum 1 2
  Started by: carlw in: Clocks and Scientific Instruments
- 6
- 28
- 19 September 2026 at 12:16
  John Haine
- Machining inserts part numbers
  Started by: JA in: Workshop Tools and Tooling
- 6
- 8
- 19 September 2026 at 10:15
  JA
- Ideas needed for problem wth Tom Senior E type Mill
  Started by: Mike Crossfield in: Manual machine tools
- 8
- 12
- 18 September 2026 at 22:41
  Kiwi Bloke
- Maxcut 5 – Arc Euro Trade
  Started by: Phil S in: Workshop Tools and Tooling
- 2
- 2
- 18 September 2026 at 22:32
  Nigel Graham 2
- What Did You Do Today 2026 1 2 … 7 8
  Started by: JasonB in: The Tea Room
- 48
- 184
- 18 September 2026 at 20:26
  Neil Wyatt
- 1904 Whitehead Vertical Gas Engine
  Started by: JasonB in: I/C Engines
- 4
- 15
- 18 September 2026 at 19:28
  JasonB
- Tom Thumb Toolpost Grinder
  Started by: Phil P in: Workshop Tools and Tooling
- 2
- 2
- 18 September 2026 at 15:30
  John Haine
- Sherline closing down
  Started by: Peter Cook 6 in: Manual machine tools
- 8
- 20
- 18 September 2026 at 13:04
  Peter Cook 6
- Model Engineer & Workshop 1 2
  Started by: Tony Watson 3 in: Model Engineer & Workshop
- 18
- 31
- 18 September 2026 at 12:55
  Neil Wyatt
- Building a 4″ traction engine
  Started by: Karl Tear in: Traction engines
- 11
- 24
- 18 September 2026 at 11:41
  Nigel Graham 2
- Su251-53 1 2
  Started by: parovoz in: Locomotives
- 14
- 28
- 18 September 2026 at 07:10
  Dave Wootton
- Denford Viceory TDS 1/1 GBL lathe
  Started by: sean logie in: General Questions
- 4
- 7
- 17 September 2026 at 20:55
  sean logie
- Have I got 12-28 UNF wrong or has Völkel? 1 2
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 12
- 30
- 17 September 2026 at 19:12
  peak4
- pendulum support springs
  Started by: gerry madden in: Clocks and Scientific Instruments
- 6
- 9
- 17 September 2026 at 18:54
  John Haine
- Thread info required for the TEMU hydraulic pressure tester
  Started by: Greensands in: General Questions
- 10
- 17
- 17 September 2026 at 18:28
  duncan webster 1
- CLarke C430 lathe threading
  Started by: tatler in: Help and Assistance! (Offered or Wanted)
- 6
- 8
- 17 September 2026 at 18:19
  Howard Lewis
- Harry’s Steam
  Started by: harryssteam in: Introduce Yourself – New members start here!
- 4
- 6
- 17 September 2026 at 17:34
  Howard Lewis

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

October 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies