3 1/2″ Guage Lamp set.

This topic has 2 replies, 2 voices, and was last updated 28 February 2014 at 12:59 by MICHAEL WILLIAMS.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
28 February 2014 at 12:22 #30478
Rod Ashton
Participant
@rodashton53132
Procurement
Advert

28 February 2014 at 12:22 #145477
Rod Ashton
Participant
@rodashton53132
Help please to find a supplier of 3 1/2" lamp set for my Rob Roy.

Couple of suppliers contacted but none had complete set, except assemble your own. Which may be my only choice? If you guys know differently. I would be pleased to get a heads up.
28 February 2014 at 12:59 #145484
MICHAEL WILLIAMS
Participant
@michaelwilliams41215
Hi Rod ,

They are not difficult to make from scratch .

Don’t know correct design for RobRoy but most lamps were either about 6 inch cube with bits on side and top or round of similar height but a bit smaller than 6 inches diameter .

Make them yourself and you can put LED and button cell inside and get some real lamps at night !

Regards ,

Michael Williams .
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Gas Tap Valves. Vintage
  Started by: dee in: Related Hobbies including Vehicle Restoration
- 5
- 6
- 19 June 2026 at 01:10
  alecs
- Windows 10 disaster
  Started by: Glyn Davies in: The Tea Room
- 6
- 7
- 18 June 2026 at 22:20
  Mark Rand
- How Good Are 3D Printers? 1 2
  Started by: Neil Wyatt in: 3D Printers and 3D Printing
- 15
- 29
- 18 June 2026 at 20:23
  Dave S
- Tapping Trick
  Started by: Steve Withnell in: Workshop Techniques
- 12
- 14
- 18 June 2026 at 20:19
  bernard towers
- Wallace valvegear simulator 1 2
  Started by: Kevan Shaw in: General Questions
- 7
- 26
- 18 June 2026 at 18:15
  John Purdy
- Greetings
  Started by: dee in: Introduce Yourself – New members start here!
- 5
- 7
- 18 June 2026 at 16:44
  dee
- Taylor Hobson Pantograph Engraver Model D 1 2
  Started by: jaCK Hobson in: Workshop Tools and Tooling
- 9
- 35
- 18 June 2026 at 15:40
  jaCK Hobson
- Comm Ads
  Started by: bernard towers in: Website Questions, Comments, and Suggestions
- 3
- 17
- 18 June 2026 at 14:58
  JasonB
- Di Palo Milling machine Manual
  Started by: Paul Scholey in: Manual machine tools
- 2
- 5
- 18 June 2026 at 13:36
  Paul Scholey
- Clarkson Horizontal – Redefined in Metric
  Started by: JasonB in: Stationary engines
- 8
- 22
- 18 June 2026 at 13:19
  JasonB
- Bridgeport Series 1 CNC 1 2 3
  Started by: tomcnc in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 12
- 51
- 18 June 2026 at 12:57
  tomcnc
- Taper Identification
  Started by: Andrew Tinsley in: Workshop Tools and Tooling
- 5
- 6
- 18 June 2026 at 11:18
  Oily Rag
- Green Dragon Sustainable Fuel
  Started by: Neil Wyatt in: Locomotives
- 10
- 17
- 18 June 2026 at 10:58
  noel shelley
- Emco Compact 5 milling table restoration
  Started by: rikt in: Manual machine tools
- 3
- 5
- 18 June 2026 at 10:35
  Graham Meek
- Linear encoders 1 2
  Started by: Speedy Builder5 in: Electronics in the Workshop
- 15
- 29
- 18 June 2026 at 10:19
  Bob Worsley
- Logging in to the forum
  Started by: old mart in: The Tea Room
- 4
- 4
- 18 June 2026 at 09:29
  Thor 🇳🇴
- Running 380V 3-phase motor on 230V 1-phase 1 2
  Started by: jimalm in: Electronics in the Workshop
- 13
- 26
- 17 June 2026 at 21:30
  Versaboss
- Lathe cutting aggressive taper
  Started by: Lee Kennedy in: Manual machine tools
- 15
- 18
- 17 June 2026 at 21:17
  speelwerk
- 4 cylinder rotary valve
  Started by: AStroud in: Work In Progress and completed items
- 5
- 14
- 17 June 2026 at 21:04
  old mart
- Lightning 1 2 3
  Started by: duncan webster 1 in: Electronics in the Workshop
- 14
- 52
- 17 June 2026 at 15:26
  duncan webster 1
- Orbital – Not your Usual Oscillator!
  Started by: JasonB in: Stationary engines
- 12
- 19
- 17 June 2026 at 12:50
  duncan webster 1
- AJ Reeves 5 inch driving trolley bogies
  Started by: Ian R in: Locomotives
- 3
- 7
- 17 June 2026 at 08:25
  Ian R
- Axle pin question – choice of material and possible need for case hardening?
  Started by: barryblundell in: Materials
- 5
- 10
- 17 June 2026 at 01:19
  howardb
- ML7 – Zeroing the Topslide? 1 2
  Started by: Dr_GMJN in: Workshop Techniques
- 21
- 35
- 16 June 2026 at 22:18
  ega
- upgrade of Alibre Atom 3D
  Started by: David George 1 in: CAD – Technical drawing & design
- 4
- 5
- 16 June 2026 at 19:31
  David Jupp

3 1/2″ Guage Lamp set.

3 1/2″ Guage Lamp set.

Latest Replies

Latest Issue

May 2026

Newsletter Sign-up

Latest Replies