1930’s Ford plant

1930’s Ford plant

This topic has 3 replies, 3 voices, and was last updated 13 October 2020 at 19:41 by Michael Gilligan.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
13 October 2020 at 13:07 #36113
Dave Halford
Participant
@davehalford22513
Advert

13 October 2020 at 13:08 #501159
Dave Halford
Participant
@davehalford22513
How things were. with lots of machining
13 October 2020 at 19:04 #501230
john halfpenny
Participant
@johnhalfpenny52803
Great video, not seen that before despite owning pre-war Ford's for 40 years.
13 October 2020 at 19:41 #501236
Michael Gilligan
Participant
@michaelgilligan61133
Thanks for the link, Dave

MichaelG.
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Arc closure and popularity of Chineese lathes
  Started by: File Handle in: The Tea Room
- 4
- 5
- 20 September 2026 at 10:35
  John Haine
- Harrison L5 mk2 or not
  Started by: sean logie in: Workshop Tools and Tooling
- 2
- 2
- 20 September 2026 at 10:31
  John Haine
- Doobells
  Started by: Michael Gilligan in: The Tea Room
- 2
- 4
- 20 September 2026 at 10:23
  Michael Gilligan
- Mini lathes I need to look into
  Started by: mcenhillk in: Manual machine tools
- 14
- 18
- 20 September 2026 at 08:06
  Dell
- End mill sharpening 1 2
  Started by: petro1head in: General Questions
- 16
- 32
- 19 September 2026 at 23:30
  Nigel Graham 2
- My week this week! My workshop videos 1 2 … 13 14
  Started by: Phil Whitley in: The Tea Room
- 16
- 332
- 19 September 2026 at 19:24
  Phil Whitley
- … I had hoped we were growing-out of this nonsense ! 1 2
  Started by: Michael Gilligan in: The Tea Room
- 21
- 28
- 19 September 2026 at 17:37
  Howard Lewis
- Octopus Heat Pump 1 2 3 4
  Started by: Michael Gilligan in: The Tea Room
- 25
- 88
- 19 September 2026 at 16:30
  Macolm
- New Myford 7 DRO article
  Started by: Bob Worsley in: Electronics in the Workshop
- 7
- 20
- 19 September 2026 at 14:09
  Michael Gilligan
- Suzanne
  Started by: Steve Huckins in: Work In Progress and completed items
- 4
- 6
- 19 September 2026 at 14:06
  Dalboy
- Drive coil ampere turns for seconds pendulum 1 2
  Started by: carlw in: Clocks and Scientific Instruments
- 6
- 28
- 19 September 2026 at 12:16
  John Haine
- Machining inserts part numbers
  Started by: JA in: Workshop Tools and Tooling
- 6
- 8
- 19 September 2026 at 10:15
  JA
- Ideas needed for problem wth Tom Senior E type Mill
  Started by: Mike Crossfield in: Manual machine tools
- 8
- 12
- 18 September 2026 at 22:41
  Kiwi Bloke
- Maxcut 5 – Arc Euro Trade
  Started by: Phil S in: Workshop Tools and Tooling
- 2
- 2
- 18 September 2026 at 22:32
  Nigel Graham 2
- What Did You Do Today 2026 1 2 … 7 8
  Started by: JasonB in: The Tea Room
- 48
- 184
- 18 September 2026 at 20:26
  Neil Wyatt
- 1904 Whitehead Vertical Gas Engine
  Started by: JasonB in: I/C Engines
- 4
- 15
- 18 September 2026 at 19:28
  JasonB
- Tom Thumb Toolpost Grinder
  Started by: Phil P in: Workshop Tools and Tooling
- 2
- 2
- 18 September 2026 at 15:30
  John Haine
- Sherline closing down
  Started by: Peter Cook 6 in: Manual machine tools
- 8
- 20
- 18 September 2026 at 13:04
  Peter Cook 6
- Model Engineer & Workshop 1 2
  Started by: Tony Watson 3 in: Model Engineer & Workshop
- 18
- 31
- 18 September 2026 at 12:55
  Neil Wyatt
- Building a 4″ traction engine
  Started by: Karl Tear in: Traction engines
- 11
- 24
- 18 September 2026 at 11:41
  Nigel Graham 2
- Su251-53 1 2
  Started by: parovoz in: Locomotives
- 14
- 28
- 18 September 2026 at 07:10
  Dave Wootton
- Denford Viceory TDS 1/1 GBL lathe
  Started by: sean logie in: General Questions
- 4
- 7
- 17 September 2026 at 20:55
  sean logie
- Have I got 12-28 UNF wrong or has Völkel? 1 2
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 12
- 30
- 17 September 2026 at 19:12
  peak4
- pendulum support springs
  Started by: gerry madden in: Clocks and Scientific Instruments
- 6
- 9
- 17 September 2026 at 18:54
  John Haine
- Thread info required for the TEMU hydraulic pressure tester
  Started by: Greensands in: General Questions
- 10
- 17
- 17 September 2026 at 18:28
  duncan webster 1

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

October 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies