18100 loco – Tim Coles ?

18100 loco – Tim Coles ?

This topic has 2 replies, 3 voices, and was last updated 18 November 2025 at 15:08 by Brian Baker 2.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
18 November 2025 at 10:40 #825116
gerry madden
Participant
@gerrymadden53711
In the latest MEW there is a reference to Tim Coles and his rather nice model of the Gas Turbine loco 18100. Unfortunately there are some very very strange things going on with his axle boxes 🙂

I wonder if anyone can let me know how to contact him to discuss the matter please ?

Gerry
Advert

18 November 2025 at 10:45 #825119
noel shelley
Participant
@noelshelley55608
Try the Cambridge club , or MEW. Good luck Noel.
18 November 2025 at 15:08 #825127
Brian Baker 2
Participant
@brianbaker2
Greetings Gerry, I am not sure that you can contact Tim via the Cambridge Club, but he is a member of the Seven and a Quarter inch gauge Society where he edits the club magazine.

Regards

Brian B
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Wallace valvegear simulator
  Started by: Kevan Shaw in: General Questions
- 7
- 23
- 13 June 2026 at 18:43
  John Purdy
- Taylor Hobson Pantograph Engraver Model D 1 2
  Started by: jaCK Hobson in: Workshop Tools and Tooling
- 8
- 30
- 13 June 2026 at 17:56
  jaCK Hobson
- Testing Single Point Thread Fitment
  Started by: berwick in: Beginners questions
- 9
- 9
- 13 June 2026 at 17:09
  Dave S
- Lightning 1 2
  Started by: duncan webster 1 in: Electronics in the Workshop
- 13
- 47
- 13 June 2026 at 15:59
  duncan webster 1
- What Did You Do Today 2026 1 2 … 4 5
  Started by: JasonB in: The Tea Room
- 34
- 115
- 13 June 2026 at 15:38
  Dalboy
- Hindu ascetic in picture gallery
  Started by: Bill Phinn in: Website Questions, Comments, and Suggestions
- 3
- 3
- 13 June 2026 at 15:37
  Neil Wyatt
- Bridgeport Milling Machine feed control module
  Started by: Mark Willis in: Workshop Tools and Tooling
- 13
- 25
- 13 June 2026 at 13:08
  henrik83
- international exhibition 1862
  Started by: duncan webster 1 in: The Tea Room
- 9
- 13
- 13 June 2026 at 11:41
  gerry madden
- My adventures with a bench top CNC mill 1 2 3
  Started by: John Hinkley in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 8
- 65
- 13 June 2026 at 10:12
  John Hinkley
- Air Duster
  Started by: jaCK Hobson in: Workshop Tools and Tooling
- 4
- 5
- 13 June 2026 at 10:00
  jaCK Hobson
- Running 380V 3-phase motor on 230V 1-phase
  Started by: jimalm in: Electronics in the Workshop
- 9
- 15
- 13 June 2026 at 09:07
  Vic
- Bridgeport Series 1 CNC 1 2
  Started by: tomcnc in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 12
- 50
- 13 June 2026 at 08:43
  Les Riley
- Gauge Glass Fitting
  Started by: Thomas Clarke in: General Questions
- 10
- 14
- 13 June 2026 at 08:33
  Luker
- Searching for “The Pennsylvania A3 Switcher” by Kozo Hiraoka
  Started by: timdotd in: Books
- 6
- 7
- 13 June 2026 at 08:22
  DC31k
- Lathe cutting aggressive taper
  Started by: Lee Kennedy in: Manual machine tools
- 4
- 4
- 13 June 2026 at 07:15
  JasonB
- Myford VMC Spindle Advice Please. 1 2
  Started by: Nigel Graham 2 in: Manual machine tools
- 10
- 30
- 12 June 2026 at 23:11
  Nigel Graham 2
- All things Beaver Mill 1 2 … 9 10
  Started by: Robert James 3 in: Manual machine tools
- 43
- 226
- 12 June 2026 at 21:50
  Mark Rand
- Clockmaking starter project?
  Started by: Gman in: Clocks and Scientific Instruments
- 10
- 19
- 12 June 2026 at 20:21
  iacooper
- 3 1/2″ Gauge Discussion Group 1 2 3
  Started by: Neil Wyatt in: General Questions
- 37
- 70
- 12 June 2026 at 17:16
  Paul McDonough
- Boxford CUD cabinet screw sizes and threads
  Started by: lucerne in: Manual machine tools
- 7
- 10
- 12 June 2026 at 17:15
  lucerne
- How Good Are 3D Printers?
  Started by: Neil Wyatt in: 3D Printers and 3D Printing
- 1
- 1
- 12 June 2026 at 17:02
  Neil Wyatt
- Replacement Allbrit Draftmaster Protractor Rulers
  Started by: wigan2026 in: Workshop Tools and Tooling
- 7
- 12
- 12 June 2026 at 16:20
  Dusty
- ML7 help please!
  Started by: myfordmikeml7 in: General Questions
- 7
- 8
- 12 June 2026 at 11:22
  myfordmikeml7
- Stirling single drawings question.
  Started by: RRMBK in: Locomotives
- 1
- 1
- 11 June 2026 at 23:18
  RRMBK
- Axminster Granite Surface Plate – Delamination of surface coating
  Started by: Greensands in: Workshop Tools and Tooling
- 8
- 8
- 11 June 2026 at 19:24
  Andy Stopford

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

May 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies