1 ” Burrells ??

1 ” Burrells ??

This topic has 3 replies, 3 voices, and was last updated 13 August 2018 at 15:11 by Bill Stafford 3.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
8 August 2018 at 19:06 #2893
Will S.
Participant
@wills-37868
What have I got
Advert

8 August 2018 at 19:06 #366350
Will S.
Participant
@wills-37868
I've had this engine for awhile and was thinking of selling to fund a change to steam boating . I think its a model, roughly of a 1"Burrels but not sure. Any idea's of what it might be and it's value. It sits on the shelf to much.
8 August 2018 at 19:35 #366358
JasonB
Moderator
@jasonb
That is a 1" Minnie Traction Engine with a few tweaks possibly to make it look a bit more like a Burrell or showmans engine. More spokes and a solid disc type flywheel being the most obvious.

Hard to put a price on it without being able to see the quality of the workmanship or whether there is any paperwork to suggest the boiler has been tested.

J
13 August 2018 at 15:11 #367094
Bill Stafford 3
Participant
@billstafford3
Thank you JasonB for your kind help

W.
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Gears
  Started by: Franco Convertini in: General Questions
- 7
- 11
- 8 October 2026 at 13:21
  peak4
- Parkside Electronics
  Started by: Clive Steer in: General Questions
- 8
- 22
- 8 October 2026 at 13:12
  shayodon
- Reverting An ML7 To Change-Wheels: Any Thoughts?? 1 2 3
  Started by: Nigel Graham 2 in: Manual machine tools
- 20
- 52
- 8 October 2026 at 13:09
  peak4
- Locomotion No 1 – plans
  Started by: Bob Wild in: Help and Assistance! (Offered or Wanted)
- 4
- 6
- 8 October 2026 at 12:49
  Dave Wootton
- Picomite Version 7 – better than Arduino?
  Started by: IanT in: Electronics in the Workshop
- 7
- 17
- 8 October 2026 at 12:03
  IanT
- What Did You Do Today 2026 1 2 … 8 9
  Started by: JasonB in: The Tea Room
- 53
- 205
- 8 October 2026 at 11:44
  bernard towers
- Moving Targets
  Started by: Michael Gilligan in: The Tea Room
- 6
- 8
- 8 October 2026 at 11:40
  Chuck Taper
- Minnie Traction Engine – Damper Hinge Plate
  Started by: Dominic Bramley in: Traction engines
- 6
- 9
- 8 October 2026 at 11:18
  Dave Halford
- Liney RV-2 Rescue
  Started by: JasonB in: Stationary engines
- 2
- 3
- 8 October 2026 at 10:33
  renardiere7
- Window weights as a source of cast iron.?
  Started by: File Handle in: Materials
- 17
- 19
- 8 October 2026 at 09:26
  Mick Bailey
- Tom Senior small vertical head axial play
  Started by: chris1984 in: Manual machine tools
- 2
- 2
- 7 October 2026 at 22:15
  Kiwi Bloke
- Tom Senior small vertical head axial play
  Started by: chris1984 in: Manual machine tools
- 1
- 1
- 7 October 2026 at 20:05
  chris1984
- A nice Lidl improvement … ULGD 5.0 E4
  Started by: Michael Gilligan in: Electronics in the Workshop
- 3
- 3
- 7 October 2026 at 19:07
  peak4
- Leeky diverter valve on a ‘telephone’ style bath/shower mixer tap
  Started by: jon hill 3 in: Related Hobbies including Vehicle Restoration
- 9
- 21
- 7 October 2026 at 17:16
  jon hill 3
- Current Thoughts on 3 Phase Smart Meters
  Started by: Colin Heseltine in: The Tea Room
- 5
- 5
- 7 October 2026 at 16:28
  howardb
- Where is it all going? Claude – CAD – product
  Started by: Mike Hurley in: CAD – Technical drawing & design
- 9
- 15
- 7 October 2026 at 13:57
  David Senior
- Myford ML7 gearbox and how it affects metric change wheels.
  Started by: philml7 in: Introduce Yourself – New members start here!
- 8
- 12
- 7 October 2026 at 13:00
  Nigel Graham 2
- Turbo 90 welding set
  Started by: Michael Callaghan in: Workshop Tools and Tooling
- 5
- 5
- 7 October 2026 at 11:44
  jon hill 3
- New Member
  Started by: starjump in: Introduce Yourself – New members start here!
- 1
- 1
- 7 October 2026 at 10:40
  starjump
- Hello everyone
  Started by: andrew998 in: Introduce Yourself – New members start here!
- 3
- 3
- 7 October 2026 at 10:22
  noel shelley
- Hemholtz coil positioning
  Started by: John Purdy in: Clocks and Scientific Instruments
- 2
- 4
- 7 October 2026 at 06:07
  John Haine
- Portoss lathe – new to me.
  Started by: File Handle in: Beginners questions
- 6
- 16
- 7 October 2026 at 00:15
  Nigel Graham 2
- Blank posts in forum
  Started by: Mark Rand in: New Forum Software questions, comments and Test Threads
- 5
- 5
- 6 October 2026 at 18:32
  JasonB
- Stuart 10V conn rod
  Started by: Neil A in: Materials
- 7
- 15
- 6 October 2026 at 17:41
  Mick Bailey
- 5 inch gauge Stirling single injector position
  Started by: Michael Callaghan in: Locomotives
- 2
- 2
- 6 October 2026 at 17:33
  Baz

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

October 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies