5″ gauge Lilla

5″ gauge Lilla

This topic has 3 replies, 3 voices, and was last updated 10 July 2012 at 15:17 by Colin G.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
10 July 2012 at 14:16 #94079
Deltic007
Participant
@deltic007
Hi all,

does anyone know where I can get hold of a set of drawings for the loco above,my father has Lilla partially finished in his attic and I want to finish it for him as he is too ill now,The drawing he had were out of a magazine but have been all but destroyed.thanks

mike
Advert

10 July 2012 at 14:16 #6234
Deltic007
Participant
@deltic007
10 July 2012 at 14:56 #94083
David Clark 13
Participant
@davidclark13
Hi there

?Engineering in Miniature volume 1 and a coupl from volume 2.

Try eBay or the Toolbox in Colyton Devon but not till tomorrow.

regards David
10 July 2012 at 15:17 #94085
Colin G
Participant
@coling
Hi Mike,

Lilla is a 3 1/2 in gauge loco. You are probably confused because being a narrow gauge prototype then this gives a 3 1/2 in gauge model which is similar in overall proportion to a 5 in gauge standard gauge loco. David is correct that E in M did include the Lilla consruction articles. Drawings and castings are still available from Blackgates ( Leeds ). If you requre a commercial boiler then you could be looking in the region of £1500 !

Regards, Colin
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Powerfeeders
  Started by: larry phelan 1 in: Help and Assistance! (Offered or Wanted)
- 7
- 15
- 13 October 2026 at 11:10
  mgnbuk
- Does anyone have any info about these vices
  Started by: bjcolyer in: Introduce Yourself – New members start here!
- 3
- 5
- 13 October 2026 at 11:00
  bjcolyer
- Workshop building – have lots of space
  Started by: Carl Farrington in: General Questions
- 8
- 10
- 13 October 2026 at 10:20
  JA
- DC Brushed Servomotor Controller
  Started by: Barry Smith 4 in: Electronics in the Workshop
- 1
- 1
- 13 October 2026 at 09:04
  Barry Smith 4
- rotary table issue
  Started by: tatler in: Workshop Tools and Tooling
- 6
- 12
- 13 October 2026 at 09:04
  JasonB
- Best approach to pip removal
  Started by: Bill Phinn in: Workshop Techniques
- 10
- 21
- 13 October 2026 at 08:56
  Hollowpoint
- Tom Senior small vertical head axial play
  Started by: chris1984 in: Manual machine tools
- 4
- 6
- 13 October 2026 at 07:20
  David Senior
- Farm Gate Lock.
  Started by: Grizzly bear in: The Tea Room
- 12
- 15
- 13 October 2026 at 07:12
  DC31k
- Still On IMSI’s Books!
  Started by: Nigel Graham 2 in: CAD – Technical drawing & design
- 1
- 1
- 13 October 2026 at 00:34
  Nigel Graham 2
- Model Engineer Magazine Collection
  Started by: mfengine1 in: Books
- 11
- 21
- 12 October 2026 at 20:12
  noel shelley
- rotary table to make 1 gauge drive wheels
  Started by: tatler in: Locomotives
- 2
- 2
- 12 October 2026 at 19:43
  JasonB
- Model Turbines 1 2 … 26 27
  Started by: Turbine Guy in: Stationary engines
- 28
- 659
- 12 October 2026 at 19:22
  Turbine Guy
- Midlands Exhibition, share a taxi
  Started by: duncan webster 1 in: Exhibitions, Shows and Club Events
- 1
- 1
- 12 October 2026 at 18:30
  duncan webster 1
- New Member
  Started by: starjump in: Introduce Yourself – New members start here!
- 4
- 10
- 12 October 2026 at 16:37
  Howard Lewis
- Motorcycle Centre Stand Pivot
  Started by: COLIN MARTIN 2 in: Related Hobbies including Vehicle Restoration
- 8
- 16
- 12 October 2026 at 15:04
  COLIN MARTIN 2
- Moving Targets
  Started by: Michael Gilligan in: The Tea Room
- 11
- 21
- 12 October 2026 at 13:07
  Martin Johnson 1
- Clutch for ML7R
  Started by: Andrew Tinsley in: Manual machine tools
- 7
- 12
- 12 October 2026 at 10:49
  Dave Wootton
- The lazy man’s fly cutter
  Started by: Sonic Escape in: Workshop Tools and Tooling
- 12
- 16
- 12 October 2026 at 09:45
  Andy Stopford
- Reverting An ML7 To Change-Wheels: Any Thoughts?? 1 2 3
  Started by: Nigel Graham 2 in: Manual machine tools
- 22
- 57
- 12 October 2026 at 09:33
  Charles Lamont
- What Did You Do Today 2026 1 2 … 8 9
  Started by: JasonB in: The Tea Room
- 54
- 217
- 11 October 2026 at 23:25
  Nigel Graham 2
- 3 1/2” gauge loco, coupling height?
  Started by: Paul McDonough in: Locomotives
- 5
- 7
- 11 October 2026 at 22:14
  Paul McDonough
- Liney RV-2 Rescue
  Started by: JasonB in: Stationary engines
- 3
- 9
- 11 October 2026 at 21:43
  renardiere7
- Preview of whats coming in Freecad 26.3 1 2
  Started by: Russell Eberhardt in: CAD – Technical drawing & design
- 8
- 26
- 11 October 2026 at 20:36
  lee webster
- Myford ML4 Identification
  Started by: Steven Volz in: Manual machine tools
- 7
- 9
- 11 October 2026 at 17:08
  Howard Lewis
- Hello from Pensford
  Started by: ralpharama in: Introduce Yourself – New members start here!
- 3
- 3
- 11 October 2026 at 16:08
  Howard Lewis

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

October 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies