can anyone find online supplier of this bearing

can anyone find online supplier of this bearing

This topic has 6 replies, 5 voices, and was last updated 22 May 2012 at 08:09 by Ian Parkin.

Viewing 7 posts - 1 through 7 (of 7 total)

Author

Posts
21 May 2012 at 19:51 #91349
Ian Parkin
Participant
@ianparkin39383
I have a startrite bandsaw most bearings are imperial sizes

however the blade guide bearings are as follows

marked nachi 10bcs 1nsl

id 10mm (measured on the shaft it fits on)

od 26.1mm ( measured on bearing)

width 11.5 mm

any ideas as to a supplier?

Ian
Advert

21 May 2012 at 19:51 #6160
Ian Parkin
Participant
@ianparkin39383
21 May 2012 at 20:03 #91351
robert ramage
Participant
@robertramage25020
Since its only a blade guide bearing. Would it not be easier to use a bearing you can get off the shelf. 10 26 12. Simply bearings have this size in stock.
21 May 2012 at 20:05 #91352
V8Eng
Participant
@v8eng
Possibly here.

**LINK**
21 May 2012 at 20:07 #91353
JasonB
Moderator
@jasonb
Have you tried one of the specialist Startrite spares dealers there are a few who do parts for old machines, whats the model?

J
21 May 2012 at 21:13 #91363
Jeff Dayman
Participant
@jeffdayman43397
Hi Ian,

You can get the Nachi brg you mention from RPM Bearing in Boca Raton Florida USA or RPM Brazil. However they have $500 min order qty. – not what you wanted I'm sure.

You can get a 63000-2RS1 standard bearing from any brg/industrial drives house in the world, many very inexpensively. This is the 10 x 26 x 12 brg Robert mentioned.

I have bought similar sized bearings for less than a dollar each, if they are a stock standard size, at surplus and industrial drives houses here.

JD
22 May 2012 at 08:09 #91379
Ian Parkin
Participant
@ianparkin39383
Thanks for all your replies

I know that a 63000 is close but I was more intrigued as to why startrite had used such an unusual bearing

also these seem to be very expensive £6 for a budget and £12 for a brand name

Ian
Author

Posts

Viewing 7 posts - 1 through 7 (of 7 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Still On IMSI’s Books!
  Started by: Nigel Graham 2 in: CAD – Technical drawing & design
- 1
- 1
- 13 October 2026 at 00:34
  Nigel Graham 2
- Farm Gate Lock.
  Started by: Grizzly bear in: The Tea Room
- 11
- 14
- 13 October 2026 at 00:07
  duncan webster 1
- Best approach to pip removal
  Started by: Bill Phinn in: Workshop Techniques
- 10
- 19
- 12 October 2026 at 23:07
  Nigel Graham 2
- Workshop building – have lots of space
  Started by: Carl Farrington in: General Questions
- 7
- 8
- 12 October 2026 at 22:59
  duncan webster 1
- rotary table issue
  Started by: tatler in: Workshop Tools and Tooling
- 5
- 8
- 12 October 2026 at 22:47
  duncan webster 1
- Tom Senior small vertical head axial play
  Started by: chris1984 in: Manual machine tools
- 3
- 5
- 12 October 2026 at 20:45
  Kiwi Bloke
- Model Engineer Magazine Collection
  Started by: mfengine1 in: Books
- 11
- 21
- 12 October 2026 at 20:12
  noel shelley
- rotary table to make 1 gauge drive wheels
  Started by: tatler in: Locomotives
- 2
- 2
- 12 October 2026 at 19:43
  JasonB
- Model Turbines 1 2 … 26 27
  Started by: Turbine Guy in: Stationary engines
- 28
- 659
- 12 October 2026 at 19:22
  Turbine Guy
- Midlands Exhibition, share a taxi
  Started by: duncan webster 1 in: Exhibitions, Shows and Club Events
- 1
- 1
- 12 October 2026 at 18:30
  duncan webster 1
- Does anyone have any info about these vices
  Started by: bjcolyer in: Introduce Yourself – New members start here!
- 2
- 2
- 12 October 2026 at 17:39
  Nigel Bennett
- New Member
  Started by: starjump in: Introduce Yourself – New members start here!
- 4
- 10
- 12 October 2026 at 16:37
  Howard Lewis
- Motorcycle Centre Stand Pivot
  Started by: COLIN MARTIN 2 in: Related Hobbies including Vehicle Restoration
- 8
- 16
- 12 October 2026 at 15:04
  COLIN MARTIN 2
- Moving Targets
  Started by: Michael Gilligan in: The Tea Room
- 11
- 21
- 12 October 2026 at 13:07
  Martin Johnson 1
- Powerfeeders
  Started by: larry phelan 1 in: Help and Assistance! (Offered or Wanted)
- 5
- 12
- 12 October 2026 at 12:32
  larry phelan 1
- Clutch for ML7R
  Started by: Andrew Tinsley in: Manual machine tools
- 7
- 12
- 12 October 2026 at 10:49
  Dave Wootton
- The lazy man’s fly cutter
  Started by: Sonic Escape in: Workshop Tools and Tooling
- 12
- 16
- 12 October 2026 at 09:45
  Andy Stopford
- Reverting An ML7 To Change-Wheels: Any Thoughts?? 1 2 3
  Started by: Nigel Graham 2 in: Manual machine tools
- 22
- 57
- 12 October 2026 at 09:33
  Charles Lamont
- What Did You Do Today 2026 1 2 … 8 9
  Started by: JasonB in: The Tea Room
- 54
- 217
- 11 October 2026 at 23:25
  Nigel Graham 2
- 3 1/2” gauge loco, coupling height?
  Started by: Paul McDonough in: Locomotives
- 5
- 7
- 11 October 2026 at 22:14
  Paul McDonough
- Liney RV-2 Rescue
  Started by: JasonB in: Stationary engines
- 3
- 9
- 11 October 2026 at 21:43
  renardiere7
- Preview of whats coming in Freecad 26.3 1 2
  Started by: Russell Eberhardt in: CAD – Technical drawing & design
- 8
- 26
- 11 October 2026 at 20:36
  lee webster
- Myford ML4 Identification
  Started by: Steven Volz in: Manual machine tools
- 7
- 9
- 11 October 2026 at 17:08
  Howard Lewis
- Hello from Pensford
  Started by: ralpharama in: Introduce Yourself – New members start here!
- 3
- 3
- 11 October 2026 at 16:08
  Howard Lewis
- Too much to take in in one go, FreeCAD 26.3
  Started by: Russell Eberhardt in: CAD – Technical drawing & design
- 1
- 1
- 11 October 2026 at 15:47
  Russell Eberhardt

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

October 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies