Drill bit grinder

This topic has 14 replies, 11 voices, and was last updated 26 May 2018 at 18:17 by Cornish Jack.

Viewing 15 posts - 1 through 15 (of 15 total)

Author

Posts
26 May 2018 at 10:56 #355415
BOB BLACKSHAW 1
Participant
@bobblackshaw1
I have a lot of drills which have been collected over the years, most have been hand sharpened by myself. I use to hand grind drills to a very good standard when in the engineering days, some I've used lately from the 70s that leave no burr when drilling steel.

As my eyesight is not as good today and shaky hands can a recommendation for a drill sharpener be given. Are the electric type that sell for £30 any good or the £20 type that are used with the bench grinder.

I was thinking of making the Harold Hall grinding rest, but I've got other things on the go at the moment so I would rathe buy one. But if his grinding rest would be better than the ones I've mentioned then I will make one later,but I would rather buy one than make one.

Thanks Bob.
Advert

26 May 2018 at 10:56 #26001
BOB BLACKSHAW 1
Participant
@bobblackshaw1
26 May 2018 at 11:03 #355417
larry phelan 1
Participant
@larryphelan1
If anyone knows of one,let me know too !!
26 May 2018 at 11:36 #355422
John Rudd
Participant
@johnrudd16576
I bought the Sealey SMS2008 fron Ebay, prices vary,so do your homework…. They are very good for bits from 3mm upwards….Cant say anymore than that…

The cheap Machinmart type for around £25 is rubbish, there is no way of making sure the drill is ground equally….I gave mine away after the first time of using!
26 May 2018 at 11:43 #355424
Gary Wooding
Participant
@garywooding25363
Although I was somewhat dubious, I purchased one of **THESE*** some time ago. I was, and still am, very pleased with it – it does a really good job of sharpening my drills.

I can't remember where I purchased it but my link shows an identical item.
26 May 2018 at 12:47 #355436
Martin Connelly
Participant
@martinconnelly55370
I have one of those as well, the only issue I have had is that the grinding wheel needed to be repositioned on the shaft. I am thinking about knocking out some sort of setting tool for it.

Martin C
26 May 2018 at 12:53 #355440
Tony Pratt 1
Participant
@tonypratt1
The original Picador drill grinding jigs [come up on Ebay from time to time] are fairly easy to use, the clones are really not the best!

Tony
26 May 2018 at 14:17 #355451
Speedy Builder5
Participant
@speedybuilder5
Anyone gone for this one ? It looks the business for about £170

**LINK**
26 May 2018 at 14:50 #355456
Mike Poole
Participant
@mikepoole82104
I was tempted by the Drill Doctor but picked up a Dormer 108 for the same money, takes up a bit more room but sharpens beautifully.

Mike
26 May 2018 at 15:15 #355457
fishy-steve
Participant
@fishy-steve
Dormer 108 for £170! Some guys get all the luck. 😉
26 May 2018 at 15:38 #355459
John Rudd
Participant
@johnrudd16576
The Sealey unit is a variation on the Drill Doctor or vice versa, but doesn't have the price tag….
26 May 2018 at 16:52 #355467
Mike Poole
Participant
@mikepoole82104
Posted by fishy-steve on 26/05/2018 15:15:57:

Dormer 108 for £170! Some guys get all the luck. 😉

eBay is your friend.

Mike
26 May 2018 at 17:31 #355473
Gary Wooding
Participant
@garywooding25363
This is the ***VIDEO*** I saw that prompted me to buy the SMS2008. I thought it would be too expensive for me, but when I checked the price here in UK I ordered one immediately, and never regretted it.

Just in case it crossed your mind, I have no connection with Sealey or any retailer or wholesaler.
26 May 2018 at 17:37 #355474
Muzzer
Participant
@muzzer
That's the Sealey SMS2008 which costs £50 delivered. Doesn't look fantastically accurate but probably better than doing it by eye. Main drawback is the max size of 13mm. Vaguely tempted to get one at some point….

Murray
26 May 2018 at 18:17 #355477
Cornish Jack
Participant
@cornishjack
Had a Drill Doctor before the workshop got trashed – yet another N Sea casualty!! Still have the video tape around somewhere. Only used it a couple of times and it was OK but I wouldn't get another unless it was ultra cheap. I have a Miller Falls jig to use with a bench grinder. Not yet used it but it looks well thought out and manufactured.

rgds

Bill
Author

Posts