Tailstock WANTED

This topic has 4 replies, 2 voices, and was last updated 10 March 2019 at 10:27 by roger kerry.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
3 March 2019 at 10:32 #398479
roger kerry
Participant
@rogerkerry44257
I have purchased an 'ALPINE TD-5AH' lathe but its missing its tailstock,

Any help greatly appreciated

Thanks Roger
Advert

3 March 2019 at 10:32 #19253
roger kerry
Participant
@rogerkerry44257
Alpine TD-5AH lathe
3 March 2019 at 14:08 #398508
Chris Trice
Participant
@christrice43267
Might be worth talking to the author of the page. You may find there's an Emco lathe (or Chinese clone) with a tailstock that fits.

http://g3ynh.info/workshop/tida_td5.html
3 March 2019 at 18:28 #398530
roger kerry
Participant
@rogerkerry44257
Hi Chris

Many thanks for your advice.

I have been in touch with Dave, his answer was that he never found a source of spare parts.

Therefor either adapt a tailstock from another lathe or find someone breaking said lathe.

Cheers
10 March 2019 at 10:27 #399536
roger kerry
Participant
@rogerkerry44257
I have found some literature that states that the following lathes were very similar but not identical:-

JET – 1024 & 1036

ENCO – 92010

If anyone can help sourcing a tailstock would be greatly appreciated.
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- New Mystery Lathe
  Started by: mart7mcfl7 in: Manual machine tools
- 4
- 9
- 6 November 2026 at 00:39
  mart7mcfl7
- Richard Simmonds’ “How To Make A Weight Driven Clock”
  Started by: iacooper in: Clocks and Scientific Instruments
- 8
- 14
- 5 November 2026 at 22:36
  iacooper
- 2inch Fowler plans
  Started by: bob53page in: Traction engines
- 6
- 11
- 5 November 2026 at 20:56
  JasonB
- Model Turbines 1 2 … 26 27
  Started by: Turbine Guy in: Stationary engines
- 28
- 664
- 5 November 2026 at 20:02
  Turbine Guy
- Building the V-Twin “Kelsey” 1 2 … 4 5
  Started by: JasonB in: Stationary engines
- 18
- 123
- 5 November 2026 at 19:20
  Jim Nic
- BCA MK III Jig Borer
  Started by: pjh in: Help and Assistance! (Offered or Wanted)
- 7
- 10
- 5 November 2026 at 19:19
  duncan webster 1
- Minnie Traction Engine – Damper Hinge Plate
  Started by: Dominic Bramley in: Traction engines
- 6
- 15
- 5 November 2026 at 18:56
  Dominic Bramley
- Onshape Learning
  Started by: BOB BLACKSHAW 1 in: CAD – Technical drawing & design
- 5
- 11
- 5 November 2026 at 18:05
  Engine Builder
- Unimat 3 baseplate
  Started by: mart7mcfl7 in: Manual machine tools
- 4
- 9
- 5 November 2026 at 17:41
  mart7mcfl7
- WAR FINISH
  Started by: Speedy Builder5 in: The Tea Room
- 11
- 12
- 5 November 2026 at 16:58
  not done it yet
- Richard B’s Minnie. 1 2
  Started by: Richard B in: Traction engines
- 4
- 26
- 5 November 2026 at 16:30
  Richard B
- Unusual dual speed pulley on motor
  Started by: gerry madden in: Manual machine tools
- 10
- 17
- 5 November 2026 at 16:28
  Macolm
- Most used ‘rubbish’ tool
  Started by: jaCK Hobson in: The Tea Room
- 9
- 12
- 5 November 2026 at 14:43
  Vic
- Shape of Boxford fixed steady blocks
  Started by: Grindstone Cowboy in: Beginners questions
- 7
- 9
- 5 November 2026 at 14:12
  Grindstone Cowboy
- A small Hobbing Machine
  Started by: Michael Gilligan in: Workshop Tools and Tooling
- 3
- 5
- 5 November 2026 at 14:08
  Michael Gilligan
- Micrometer ratchets
  Started by: Graeme Seed in: Workshop Tools and Tooling
- 11
- 17
- 5 November 2026 at 13:09
  Graeme Seed
- Mitotoyo dial caliper battery or innards.
  Started by: Clive Farrar in: General Questions
- 10
- 12
- 5 November 2026 at 09:01
  Hollowpoint
- 3d Printed Carriage Stop for Warco WM180
  Started by: James A in: Workshop Tools and Tooling
- 1
- 1
- 5 November 2026 at 07:51
  James A
- Mitutoyo Dial Calliper dial?
  Started by: Bo’sun in: Workshop Tools and Tooling
- 4
- 7
- 4 November 2026 at 22:03
  Pete
- SOLIDWORKS for MAKERS
  Started by: Paul Lousick in: CAD – Technical drawing & design
- 2
- 3
- 4 November 2026 at 21:54
  Paul Lousick
- 127t Gear With ⅞” Shaft and Keyway – Which Lathe?
  Started by: Captain Barnacles in: Workshop Tools and Tooling
- 15
- 24
- 4 November 2026 at 19:56
  Captain Barnacles
- What Did You Do Today 2026 1 2 … 9 10
  Started by: JasonB in: The Tea Room
- 56
- 247
- 4 November 2026 at 17:50
  Nigel Graham 2
- help please in identifying
  Started by: John Holloway in: General Questions
- 4
- 9
- 4 November 2026 at 16:43
  renardiere7
- Mini ER11 milling/drilling unit
  Started by: YouraT in: Manual machine tools
- 5
- 9
- 4 November 2026 at 12:05
  bernard towers
- Lathe improvements? 1 2 … 5 6
  Started by: Niels Abildgaard in: Manual machine tools
- 24
- 130
- 4 November 2026 at 09:14
  Niels Abildgaard

Tailstock WANTED

Tailstock WANTED

Latest Replies

Latest Issue

November 2026

Newsletter Sign-up

Latest Replies