Startrite FG2 Pillar Drill

This topic has 2 replies, 2 voices, and was last updated 24 September 2019 at 09:41 by Brian Wood.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
24 September 2019 at 07:44 #13647
Martin Cargill
Participant
@martincargill50290
Advert

24 September 2019 at 07:44 #430224
Martin Cargill
Participant
@martincargill50290
In our workshop we have a Startrite FG2 pillar drill. It's one of the more serious drills with a two speed motor and about 10 gears, selected by a rotary handle at the top of the drill. Yesterday the drill decided that after being used with a 1" drill at 80 rpm it would not change gear to allow the higher speeds to be used. The speed control handle will rotate but the internal gears don't change.

Has anyone had this problem before. We have a parts drawing for the drill head but it looks quite complex and a little knowledge may prevent us from stripping a lot of stuff that we don't need to.

Thanks

Martin
24 September 2019 at 09:41 #430240
Brian Wood
Participant
@brianwood45127
Martin,

I don't know the drill but this fault sounds rather like a taper pin linking gears and actuating shaft together has fallen out, leaving the shaft free to rotate without doing what it should do.

You may have no option but to strip the gearbox to find out what has gone wrong to be able to fix it

Regards Brian
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Face Drive Pins
  Started by: Michael Gilligan in: Materials
- 2
- 3
- 18 July 2026 at 18:54
  Michael Gilligan
- Fixturing conundrum with Hemingway die filer kit
  Started by: timdotd in: Workshop Techniques
- 6
- 11
- 18 July 2026 at 18:52
  timdotd
- Interactive article on Beam Engines
  Started by: glinscott in: Stationary engines
- 2
- 4
- 18 July 2026 at 18:51
  Michael Gilligan
- Honing cylinder
  Started by: Speedy Builder5 in: Workshop Techniques
- 2
- 2
- 18 July 2026 at 18:46
  JasonB
- Use of insert type lathe tools 1 2
  Started by: JA in: Workshop Tools and Tooling
- 16
- 27
- 18 July 2026 at 18:39
  JA
- Help ID’ing Round Carbide Insert and Finding a Supplier 1 2
  Started by: Jon Gibbs in: Workshop Tools and Tooling
- 10
- 36
- 18 July 2026 at 18:07
  renardiere7
- Plug in Solar 1 2 3 4
  Started by: Vic in: The Tea Room
- 26
- 81
- 18 July 2026 at 17:03
  Macolm
- Smart & Brown model A spindle lock
  Started by: old mart in: Workshop Tools and Tooling
- 2
- 12
- 18 July 2026 at 16:56
  Steve101
- Links for Workshop and Model Engineering STLs and other files.
  Started by: Neil Wyatt in: 3D Printers and 3D Printing
- 10
- 14
- 18 July 2026 at 16:29
  Mark Rand
- Pipe Size Puzzle.
  Started by: Nigel Graham 2 in: Locomotives
- 6
- 12
- 18 July 2026 at 14:52
  Zan
- Nut screws washer and bolts – you know the old joke
  Started by: Kiwi Bloke in: General Questions
- 13
- 19
- 18 July 2026 at 14:47
  duncan webster 1
- Myford VMC Spindle Advice Please. 1 2 3
  Started by: Nigel Graham 2 in: Manual machine tools
- 12
- 59
- 18 July 2026 at 11:59
  Graham Meek
- Small 3D Metal Printed Part
  Started by: Julie Ann in: 3D Printers and 3D Printing
- 1
- 1
- 18 July 2026 at 11:43
  Julie Ann
- Help please! Workshop clearance 1 2
  Started by: ksw in: General Questions
- 12
- 26
- 18 July 2026 at 10:34
  bernard towers
- QCTP 1 2
  Started by: James A in: Workshop Tools and Tooling
- 20
- 36
- 18 July 2026 at 09:12
  James A
- New project for 2025 1 2
  Started by: SteveP in: I/C Engines
- 8
- 30
- 17 July 2026 at 21:58
  SteveP
- Very Low Q
  Started by: duncan webster 1 in: Clocks and Scientific Instruments
- 2
- 2
- 17 July 2026 at 18:39
  John Haine
- How Good Are 3D Printers? 1 2
  Started by: Neil Wyatt in: 3D Printers and 3D Printing
- 19
- 43
- 17 July 2026 at 17:17
  Roderick Jenkins
- My adventures with a bench top CNC mill 1 2 3
  Started by: John Hinkley in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 8
- 70
- 17 July 2026 at 16:13
  JasonB
- Maisie
  Started by: ian Holdsworth in: Beginners questions
- 10
- 14
- 17 July 2026 at 12:48
  KenL
- My Intro
  Started by: Martin Freestone in: Introduce Yourself – New members start here!
- 6
- 6
- 17 July 2026 at 11:42
  Howard Lewis
- Bonding brass hubs to steel
  Started by: mikemunson in: Beginners questions
- 6
- 8
- 16 July 2026 at 17:09
  Diogenes
- Comm Ads
  Started by: bernard towers in: Website Questions, Comments, and Suggestions
- 4
- 20
- 16 July 2026 at 12:14
  JasonB
- Bridgeport Series 1 CNC 1 2 3
  Started by: tomcnc in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 12
- 60
- 16 July 2026 at 07:21
  seemack
- Bending copper tube?
  Started by: Bo’sun in: Workshop Techniques
- 18
- 22
- 15 July 2026 at 23:29
  Nigel Graham 2

Startrite FG2 Pillar Drill

Startrite FG2 Pillar Drill

Latest Replies

Latest Issue

July 2026

Newsletter Sign-up

Latest Replies