The world of model and hobby engineering

Subscribe
The Modelling Hub Logo

The world of model and hobby engineering

Subscribe
Buy Latest Issue

Forums

Help

Register

Log in

cylinder angle

Advert
New Replies
Report Bug
Help/FAQs

cylinder angle

Home › Forums › Locomotives › cylinder angle

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • 1 December 2014 at 00:15 #1343
    Martin Botting 2
    Participant
      @martinbotting2
      1 December 2014 at 00:15 #171150
      Martin Botting 2
      Participant
        @martinbotting2

        Hello folks me again with another odd question, first off I don't like to be a bother but I tend to do a search in the forum to see if there are any prior posts but I might be getting the question wrong as nothing ever shows up most times anyway don't shout at me if this question has been asked before.

        I was studying some loco drawings and looking at old photos and the angle of the cylinders on loco's like the "crab", Big Bertha and the 9f had quite a rake on them would I be right in thinking this gave better tractive and adhesion qualities as the power is more downward to the track but the pay of fwas power to the hammer blow on the rails.. reason for the question would changing the rake on lets say a robroy give it more grunt. and what would be the problems with the geometry.

        1 December 2014 at 05:55 #171156
        FMES
        Participant
          @fmes

          Normally its to line up the longitudinal centerline of the cylinder with the driving axle center at mid suspension travel, to ensure that the power delivered is even on both strokes and in forward and reverse.

          Of course the shorter the frame length the more steep the angle wil be.

          1 December 2014 at 09:30 #171167
          julian atkins
          Participant
            @julianatkins58923

            hi martin,

            usually an inclined set of outside cylinders is inclined for clearance reasons. inside cylinders are usually inclined to avoid interference with the front coupled axle.

            in forward the outward stroke has an effect on pushing the wheel down if the cylinder is steeply inclined, but on the inward stroke the opposite is the case which is not a good thing at all. have a look at the way Rocket was modified soon after building to reduce the inclination!

            cheers,

            julian

            1 December 2014 at 10:31 #171174
            John Baguley
            Participant
              @johnbaguley78655

              Certainly in the case of the 'Crabs' the inclination of the cylinders was purely to avoid clearance problems with lineside objects such as platform edges. They had a relatively low pressure boiler (180psi) and had large diameter cylinders to compensate for this.

              John

            • Author
              Posts
            Viewing 5 posts - 1 through 5 (of 5 total)
            • Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

            Latest Replies
            Report Bug
            Code of Conduct
            Help & FAQs
            Advert

            Latest Replies

            Home › Forums › Locomotives › Topics

            Viewing 25 topics - 1 through 25 (of 25 total)
            Viewing 25 topics - 1 through 25 (of 25 total)

            View full reply list.

            Advert

            Latest Issue

            Subscribe
            Buy Latest/Back Issues

            Newsletter Sign-up

            Latest Replies