Help with Model Works Black 5

This topic has 3 replies, 3 voices, and was last updated 3 September 2014 at 20:12 by RickyT.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
16 August 2014 at 07:35 #160844
Stephen Rowley
Participant
@stephenrowley13300
I recently purchased a part kit of the Model Works Black 5. Although there is ¾ of the locomotive such as boiler with all fittings, frames with axle boxes, springs and brakes, cylinders and complete tender. There are lot of other parts I will have to make including the valves for the cylinders, exhaust manifold, blower and a lot of the pipe work. Can anyone tell me who's design these locos built to?

There is also a lot of parts for a Winton Jubilee kit. It is easy to recognise some locomotive parts just by looking at them but not all. I have 20 plastic bags with parts in and the only refinance is a Winson code.

Has anyone built a Winson Jubilee and if so do you still have the parts list?

Thanks

Steve R
Advert

16 August 2014 at 07:35 #1311
Stephen Rowley
Participant
@stephenrowley13300
16 August 2014 at 08:04 #160845
Niloch
Participant
@niloch
An enquiry here should prove fruitful.
3 September 2014 at 20:12 #162626
RickyT
Participant
@rickyt
I have around 2/3 of a Winson Jubilee which I bought for a knockdown price online but without a parts list or instructions.

I subsequently invested in a bound set of instructions including a parts list for all kits from the Engineers' Emporium stand at the Midlands show. Cost me £20 or £30 but well worth it in my view.
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Richard Simmonds’ “How To Make A Weight Driven Clock”
  Started by: iacooper in: Clocks and Scientific Instruments
- 8
- 14
- 5 November 2026 at 22:36
  iacooper
- New Mystery Lathe
  Started by: mart7mcfl7 in: Manual machine tools
- 4
- 6
- 5 November 2026 at 21:38
  peak4
- 2inch Fowler plans
  Started by: bob53page in: Traction engines
- 6
- 11
- 5 November 2026 at 20:56
  JasonB
- Model Turbines 1 2 … 26 27
  Started by: Turbine Guy in: Stationary engines
- 28
- 664
- 5 November 2026 at 20:02
  Turbine Guy
- Building the V-Twin “Kelsey” 1 2 … 4 5
  Started by: JasonB in: Stationary engines
- 18
- 123
- 5 November 2026 at 19:20
  Jim Nic
- BCA MK III Jig Borer
  Started by: pjh in: Help and Assistance! (Offered or Wanted)
- 7
- 10
- 5 November 2026 at 19:19
  duncan webster 1
- Minnie Traction Engine – Damper Hinge Plate
  Started by: Dominic Bramley in: Traction engines
- 6
- 15
- 5 November 2026 at 18:56
  Dominic Bramley
- Onshape Learning
  Started by: BOB BLACKSHAW 1 in: CAD – Technical drawing & design
- 5
- 11
- 5 November 2026 at 18:05
  Engine Builder
- Unimat 3 baseplate
  Started by: mart7mcfl7 in: Manual machine tools
- 4
- 9
- 5 November 2026 at 17:41
  mart7mcfl7
- WAR FINISH
  Started by: Speedy Builder5 in: The Tea Room
- 11
- 12
- 5 November 2026 at 16:58
  not done it yet
- Richard B’s Minnie. 1 2
  Started by: Richard B in: Traction engines
- 4
- 26
- 5 November 2026 at 16:30
  Richard B
- Unusual dual speed pulley on motor
  Started by: gerry madden in: Manual machine tools
- 10
- 17
- 5 November 2026 at 16:28
  Macolm
- Most used ‘rubbish’ tool
  Started by: jaCK Hobson in: The Tea Room
- 9
- 12
- 5 November 2026 at 14:43
  Vic
- Shape of Boxford fixed steady blocks
  Started by: Grindstone Cowboy in: Beginners questions
- 7
- 9
- 5 November 2026 at 14:12
  Grindstone Cowboy
- A small Hobbing Machine
  Started by: Michael Gilligan in: Workshop Tools and Tooling
- 3
- 5
- 5 November 2026 at 14:08
  Michael Gilligan
- Micrometer ratchets
  Started by: Graeme Seed in: Workshop Tools and Tooling
- 11
- 17
- 5 November 2026 at 13:09
  Graeme Seed
- Mitotoyo dial caliper battery or innards.
  Started by: Clive Farrar in: General Questions
- 10
- 12
- 5 November 2026 at 09:01
  Hollowpoint
- 3d Printed Carriage Stop for Warco WM180
  Started by: James A in: Workshop Tools and Tooling
- 1
- 1
- 5 November 2026 at 07:51
  James A
- Mitutoyo Dial Calliper dial?
  Started by: Bo’sun in: Workshop Tools and Tooling
- 4
- 7
- 4 November 2026 at 22:03
  Pete
- SOLIDWORKS for MAKERS
  Started by: Paul Lousick in: CAD – Technical drawing & design
- 2
- 3
- 4 November 2026 at 21:54
  Paul Lousick
- 127t Gear With ⅞” Shaft and Keyway – Which Lathe?
  Started by: Captain Barnacles in: Workshop Tools and Tooling
- 15
- 24
- 4 November 2026 at 19:56
  Captain Barnacles
- What Did You Do Today 2026 1 2 … 9 10
  Started by: JasonB in: The Tea Room
- 56
- 247
- 4 November 2026 at 17:50
  Nigel Graham 2
- help please in identifying
  Started by: John Holloway in: General Questions
- 4
- 9
- 4 November 2026 at 16:43
  renardiere7
- Mini ER11 milling/drilling unit
  Started by: YouraT in: Manual machine tools
- 5
- 9
- 4 November 2026 at 12:05
  bernard towers
- Lathe improvements? 1 2 … 5 6
  Started by: Niels Abildgaard in: Manual machine tools
- 24
- 130
- 4 November 2026 at 09:14
  Niels Abildgaard

Help with Model Works Black 5

Help with Model Works Black 5

Latest Replies

Latest Issue

November 2026

Newsletter Sign-up

Latest Replies