Unimat Millenium Model.

Unimat Millenium Model.

This topic has 28 replies, 14 voices, and was last updated 4 February 2026 at 11:10 by Neville Chase.

Viewing 4 posts - 26 through 29 (of 29 total)

Author

Posts
2 February 2026 at 19:42 #835546
JasonB
Moderator
@jasonb
Have a Google for MJ-189 lathe which will bring up some clones but not seen that milling arrangement
Advert

3 February 2026 at 18:19 #835778
JasonB
Moderator
@jasonb
Graham managed to find a video of teh Unimat Clone with it’s combination milling head. Not one I have seen before.
3 February 2026 at 20:06 #835824
Dave S
Participant
@daves59043
My Emco badged U4 has a pad with 4 threaded holes cast and machined on the back of the bed.

Its Red and Silver in colour.

Dave
4 February 2026 at 11:10 #835915
Neville Chase
Participant
@nevillechase52412
On 3 February 2026 at 18:19 JasonB Said:

Graham managed to find a video of teh Unimat Clone with it’s combination milling head. Not one I have seen before.

I have a couple of these mill/drill attachments of this type, new in boxes. I am not sure what mini lathe they fitted, but believe they were for something from Korea. They were old stock from a machinery dealer, that was being sold cheaply.
Author

Posts

Viewing 4 posts - 26 through 29 (of 29 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Picomite Version 7 – better than Arduino?
  Started by: IanT in: Electronics in the Workshop
- 7
- 18
- 9 October 2026 at 08:44
  mike barrett 1
- New Member
  Started by: starjump in: Introduce Yourself – New members start here!
- 3
- 4
- 9 October 2026 at 08:01
  Andrew Crow
- Myford ML4 Identification
  Started by: Steven Volz in: Manual machine tools
- 4
- 5
- 9 October 2026 at 07:32
  andrew998
- Dore Boring Bar set
  Started by: Andrew Tinsley in: General Questions
- 3
- 3
- 9 October 2026 at 06:42
  DC31k
- Hemholtz coil positioning
  Started by: John Purdy in: Clocks and Scientific Instruments
- 2
- 5
- 9 October 2026 at 04:40
  John Purdy
- Silver solder.
  Started by: Michael Callaghan in: General Questions
- 9
- 10
- 9 October 2026 at 02:47
  Speedy Builder5
- Moving Targets
  Started by: Michael Gilligan in: The Tea Room
- 6
- 11
- 9 October 2026 at 02:36
  Michael Gilligan
- Window weights as a source of cast iron.?
  Started by: File Handle in: Materials
- 19
- 23
- 9 October 2026 at 00:49
  Nigel Graham 2
- Reverting An ML7 To Change-Wheels: Any Thoughts?? 1 2 3
  Started by: Nigel Graham 2 in: Manual machine tools
- 20
- 54
- 9 October 2026 at 00:33
  Nigel Graham 2
- Triangular Insert Tool
  Started by: James A in: Workshop Tools and Tooling
- 10
- 15
- 8 October 2026 at 22:48
  Bill Phinn
- Angled d-bit / machinist reamer?
  Started by: Fulmen in: Workshop Tools and Tooling
- 6
- 10
- 8 October 2026 at 22:41
  Bazyle
- Minnie Traction Engine – Damper Hinge Plate
  Started by: Dominic Bramley in: Traction engines
- 6
- 10
- 8 October 2026 at 20:30
  Dominic Bramley
- Locomotion No 1 – plans
  Started by: Bob Wild in: Help and Assistance! (Offered or Wanted)
- 5
- 7
- 8 October 2026 at 20:04
  Bazyle
- Tom Senior small vertical head axial play
  Started by: chris1984 in: Manual machine tools
- 3
- 3
- 8 October 2026 at 19:34
  not done it yet
- Gears
  Started by: Franco Convertini in: General Questions
- 8
- 13
- 8 October 2026 at 19:07
  Howard Lewis
- Liney RV-2 Rescue
  Started by: JasonB in: Stationary engines
- 2
- 4
- 8 October 2026 at 18:56
  JasonB
- Hello Everyone (New Member Introduction)
  Started by: cedricvale in: Introduce Yourself – New members start here!
- 5
- 5
- 8 October 2026 at 18:47
  Howard Lewis
- Hello everyone
  Started by: andrew998 in: Introduce Yourself – New members start here!
- 4
- 4
- 8 October 2026 at 18:43
  Howard Lewis
- Canterbury lamb
  Started by: Michael Callaghan in: General Questions
- 3
- 3
- 8 October 2026 at 17:55
  noel shelley
- Fusion CAD / CAM Problem
  Started by: Shaun Churchill in: CAD – Technical drawing & design
- 5
- 7
- 8 October 2026 at 17:00
  andrew998
- Parkside Electronics
  Started by: Clive Steer in: General Questions
- 8
- 22
- 8 October 2026 at 13:12
  shayodon
- What Did You Do Today 2026 1 2 … 8 9
  Started by: JasonB in: The Tea Room
- 53
- 205
- 8 October 2026 at 11:44
  bernard towers
- Tom Senior small vertical head axial play
  Started by: chris1984 in: Manual machine tools
- 1
- 1
- 7 October 2026 at 20:05
  chris1984
- A nice Lidl improvement … ULGD 5.0 E4
  Started by: Michael Gilligan in: Electronics in the Workshop
- 3
- 3
- 7 October 2026 at 19:07
  peak4
- Leeky diverter valve on a ‘telephone’ style bath/shower mixer tap
  Started by: jon hill 3 in: Related Hobbies including Vehicle Restoration
- 9
- 21
- 7 October 2026 at 17:16
  jon hill 3

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

October 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies