Steam oil

Steam oil

This topic has 4 replies, 3 voices, and was last updated 14 August 2021 at 20:25 by David Benney.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
14 August 2021 at 14:01 #558226
David Benney
Participant
@davidbenney14701
What steam oil would you recommend for a 5" Simplex please
Advert

14 August 2021 at 14:01 #10926
David Benney
Participant
@davidbenney14701
14 August 2021 at 18:38 #558245
Dave Smith 14
Participant
@davesmith14
I use Morris's steam oil in my Super Simplex, available from Heritage Steam in either 1L or 5L containers.
14 August 2021 at 20:14 #558257
Robert Atkinson 2
Participant
@robertatkinson2
They also sell direct.

https://www.morrislubricantsonline.co.uk/classic-and-steam/steam-products/

I've used their products in cars, both old and modern high performance for many years.
14 August 2021 at 20:25 #558258
David Benney
Participant
@davidbenney14701
Thank you
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Locomotion No 1 – plans
  Started by: Bob Wild in: Help and Assistance! (Offered or Wanted)
- 5
- 7
- 8 October 2026 at 20:04
  Bazyle
- Angled d-bit / machinist reamer?
  Started by: Fulmen in: Workshop Tools and Tooling
- 4
- 8
- 8 October 2026 at 19:43
  JasonB
- Tom Senior small vertical head axial play
  Started by: chris1984 in: Manual machine tools
- 3
- 3
- 8 October 2026 at 19:34
  not done it yet
- Dore Boring Bar set
  Started by: Andrew Tinsley in: General Questions
- 1
- 1
- 8 October 2026 at 19:07
  Andrew Tinsley
- Gears
  Started by: Franco Convertini in: General Questions
- 8
- 13
- 8 October 2026 at 19:07
  Howard Lewis
- Silver solder.
  Started by: Michael Callaghan in: General Questions
- 6
- 7
- 8 October 2026 at 18:59
  bernard towers
- Liney RV-2 Rescue
  Started by: JasonB in: Stationary engines
- 2
- 4
- 8 October 2026 at 18:56
  JasonB
- Hello Everyone (New Member Introduction)
  Started by: cedricvale in: Introduce Yourself – New members start here!
- 5
- 5
- 8 October 2026 at 18:47
  Howard Lewis
- Hello everyone
  Started by: andrew998 in: Introduce Yourself – New members start here!
- 4
- 4
- 8 October 2026 at 18:43
  Howard Lewis
- Window weights as a source of cast iron.?
  Started by: File Handle in: Materials
- 17
- 20
- 8 October 2026 at 18:23
  File Handle
- Canterbury lamb
  Started by: Michael Callaghan in: General Questions
- 3
- 3
- 8 October 2026 at 17:55
  noel shelley
- New Member
  Started by: starjump in: Introduce Yourself – New members start here!
- 2
- 2
- 8 October 2026 at 17:33
  Howard Lewis
- Fusion CAD / CAM Problem
  Started by: Shaun Churchill in: CAD – Technical drawing & design
- 5
- 7
- 8 October 2026 at 17:00
  andrew998
- Reverting An ML7 To Change-Wheels: Any Thoughts?? 1 2 3
  Started by: Nigel Graham 2 in: Manual machine tools
- 20
- 53
- 8 October 2026 at 14:22
  duncan webster 1
- Parkside Electronics
  Started by: Clive Steer in: General Questions
- 8
- 22
- 8 October 2026 at 13:12
  shayodon
- Picomite Version 7 – better than Arduino?
  Started by: IanT in: Electronics in the Workshop
- 7
- 17
- 8 October 2026 at 12:03
  IanT
- What Did You Do Today 2026 1 2 … 8 9
  Started by: JasonB in: The Tea Room
- 53
- 205
- 8 October 2026 at 11:44
  bernard towers
- Moving Targets
  Started by: Michael Gilligan in: The Tea Room
- 6
- 8
- 8 October 2026 at 11:40
  Chuck Taper
- Minnie Traction Engine – Damper Hinge Plate
  Started by: Dominic Bramley in: Traction engines
- 6
- 9
- 8 October 2026 at 11:18
  Dave Halford
- Tom Senior small vertical head axial play
  Started by: chris1984 in: Manual machine tools
- 1
- 1
- 7 October 2026 at 20:05
  chris1984
- A nice Lidl improvement … ULGD 5.0 E4
  Started by: Michael Gilligan in: Electronics in the Workshop
- 3
- 3
- 7 October 2026 at 19:07
  peak4
- Leeky diverter valve on a ‘telephone’ style bath/shower mixer tap
  Started by: jon hill 3 in: Related Hobbies including Vehicle Restoration
- 9
- 21
- 7 October 2026 at 17:16
  jon hill 3
- Current Thoughts on 3 Phase Smart Meters
  Started by: Colin Heseltine in: The Tea Room
- 5
- 5
- 7 October 2026 at 16:28
  howardb
- Where is it all going? Claude – CAD – product
  Started by: Mike Hurley in: CAD – Technical drawing & design
- 9
- 15
- 7 October 2026 at 13:57
  David Senior
- Myford ML7 gearbox and how it affects metric change wheels.
  Started by: philml7 in: Introduce Yourself – New members start here!
- 8
- 12
- 7 October 2026 at 13:00
  Nigel Graham 2

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

October 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies