Small drill chuck for Flexispeed

This topic has 3 replies, 3 voices, and was last updated 6 June 2017 at 18:46 by charadam.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
6 June 2017 at 16:43 #301438
Speedy Builder5
Participant
@speedybuilder5
I am searching for a reasonably priced 0 morse taper drill chuck for a FLEXISPEED lathe. Searched the usual places, but haven't found one yet. Anyone else found one ?
BobH
Advert

6 June 2017 at 16:43 #25286
Speedy Builder5
Participant
@speedybuilder5
0 morse taper drill chuck
6 June 2017 at 17:47 #301451
Frances IoM
Participant
@francesiom58905
I had the same need for my Perris lathe – which uses the small end of a 0MT – had to make my own using a small minecraft chuck that screwed onto the end of an arbour – a neater chuck is a Dremel spare (item 4486) that covers 0.4 to 3.4mm
6 June 2017 at 18:46 #301465
charadam
Participant
@charadam
Here you go:

http://www.ebay.co.uk/itm/No-0-Morse-Taper-MT0-With-B10-Arbor-for-Drill-Chuck-/122275191444?hash=item1c782b5a94:g:UpsAAOSwHsRYCIpO
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- What the hell is going on with the suppliers??? 1 2
  Started by: Hollowpoint in: General Questions
- 17
- 28
- 6 August 2026 at 15:42
  larry phelan 1
- SUSWE SU600A-2R2G1-B right mess
  Started by: tatler in: Electronics in the Workshop
- 2
- 2
- 6 August 2026 at 15:32
  Andrew Tinsley
- Clarke 0.50HP 2800 rpm motor behaving oddly.
  Started by: Andrew Tinsley in: General Questions
- 9
- 16
- 6 August 2026 at 15:24
  Andrew Tinsley
- 3/16 x 30
  Started by: Peter Howell 1 in: Workshop Tools and Tooling
- 8
- 14
- 6 August 2026 at 15:22
  Roderick Jenkins
- J style indicator holders
  Started by: BOB BLACKSHAW 1 in: General Questions
- 11
- 20
- 6 August 2026 at 14:24
  DC31k
- New project for 2025 1 2
  Started by: SteveP in: I/C Engines
- 8
- 32
- 6 August 2026 at 14:04
  renardiere7
- Sieg X3 Mill Toothed Belt
  Started by: Keith Rogers 2 in: Help and Assistance! (Offered or Wanted)
- 4
- 8
- 6 August 2026 at 10:30
  lukeama123
- Mystery debris? 1 2
  Started by: Bo’sun in: The Tea Room
- 15
- 27
- 6 August 2026 at 10:20
  Bo’sun
- It’s A Compressor, Jim, But Not… 1 2 3
  Started by: Nigel Graham 2 in: General Questions
- 15
- 51
- 5 August 2026 at 23:05
  Michael Gilligan
- Carbide tip choice advice info
  Started by: JohnF in: Workshop Tools and Tooling
- 8
- 9
- 5 August 2026 at 22:26
  Grindstone Cowboy
- A new Milling Machine
  Started by: Martin Johnson 1 in: Workshop Tools and Tooling
- 8
- 13
- 5 August 2026 at 12:58
  Martin Johnson 1
- Farm Boy 1 2 … 4 5
  Started by: Dalboy in: I/C Engines
- 17
- 119
- 5 August 2026 at 12:39
  Dalboy
- Marv Klotz Calculators for Model Engineers
  Started by: David Banham 1 in: Workshop Techniques
- 7
- 13
- 5 August 2026 at 11:41
  southernchap
- Attempt to fix, or re-purpose, or just scrap?
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 14
- 18
- 5 August 2026 at 10:22
  Hollowpoint
- My adventures with a bench top CNC mill 1 2 3 4
  Started by: John Hinkley in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 9
- 80
- 4 August 2026 at 22:23
  John Hinkley
- Roughing End Mills
  Started by: Colin Teasdale in: Beginners questions
- 8
- 17
- 4 August 2026 at 17:06
  Mark Rand
- Plug & Play controller for a milling machine
  Started by: mhudd500 in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 3
- 3
- 4 August 2026 at 13:28
  John Haine
- Thanks to John Haine
  Started by: Michael Gilligan in: Clocks and Scientific Instruments
- 2
- 3
- 4 August 2026 at 10:04
  John Haine
- newbie, with some initial questions about this forum
  Started by: frippy in: General Questions
- 7
- 9
- 3 August 2026 at 19:23
  southernchap
- can anyone make me a file? 3d file
  Started by: Ian Parkin in: 3D Printers and 3D Printing
- 8
- 9
- 3 August 2026 at 16:36
  Gerard O’Toole
- Bleedin’ hydraulics!
  Started by: Kiwi Bloke in: General Questions
- 9
- 16
- 3 August 2026 at 16:20
  Adrian R2
- Myford S7 oil useage
  Started by: AStroud in: Workshop Tools and Tooling
- 5
- 8
- 3 August 2026 at 09:40
  JohnF
- 4¾” 13swg copper tubing?
  Started by: martynt50 in: Materials
- 6
- 7
- 2 August 2026 at 19:47
  martynt50
- Home thoughts from abroad
  Started by: martynt50 in: Introduce Yourself – New members start here!
- 4
- 5
- 2 August 2026 at 13:20
  martynt50
- Why righthand threads? 1 2 3
  Started by: vintagengineer in: General Questions
- 30
- 55
- 2 August 2026 at 13:08
  bernard towers

Small drill chuck for Flexispeed

Small drill chuck for Flexispeed

Latest Replies

Latest Issue

August 2026

Newsletter Sign-up

Latest Replies