slip ecentric drive pin

slip ecentric drive pin

This topic has 3 replies, 2 voices, and was last updated 11 December 2013 at 20:40 by nigel jones 5.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
8 December 2013 at 00:11 #137296
michael burton 1
Participant
@michaelburton1
hi how do you work out the drive pin locataion on a slip eccentric iv got the eccentric with a 7mm off set to give me a 14mm throw…

is it critical as to were the drive pin is located

cheers all
Advert

8 December 2013 at 00:11 #6968
michael burton 1
Participant
@michaelburton1
8 December 2013 at 00:25 #137297
michael burton 1
Participant
@michaelburton1
im using a stop collar design and not the type were you use a plate with a curved slot
11 December 2013 at 20:40 #137628
nigel jones 5
Participant
@nigeljones5
Im pretty sure the pin location has no bearing on things, its the dimension of the slotted part that is all important in determining the correct throw when moved to reverse
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- REXON SS16A scroll saw
  Started by: Michael Gilligan in: Workshop Tools and Tooling
- 3
- 7
- 24 July 2026 at 22:32
  Michael Gilligan
- Hobbing a Brass or Aluminium Drive Pulley to Stop Belt Slippage
  Started by: Blue Heeler in: Hints And Tips for model engineers
- 5
- 5
- 24 July 2026 at 21:57
  Michael Gilligan
- Mysterious Morse Tapers
  Started by: Pippin in: Workshop Tools and Tooling
- 9
- 13
- 24 July 2026 at 21:36
  Ian P
- Posts by new member containing ads.
  Started by: alecs in: Website Questions, Comments, and Suggestions
- 5
- 9
- 24 July 2026 at 20:22
  bernard towers
- Is anyone interested in developping a new series of model engines? 1 2 3 4
  Started by: paulmichael1084 in: General Questions
- 20
- 83
- 24 July 2026 at 16:42
  John P
- Deep drilling
  Started by: Speedy Builder5 in: Workshop Techniques
- 9
- 17
- 24 July 2026 at 16:34
  ega
- Doris Black 5 mech lubricator question.
  Started by: kevmol57 in: Workshop Techniques
- 4
- 10
- 24 July 2026 at 13:25
  kevmol57
- 24cc DIESEL ENGINE FROM SOLID 1 2 3
  Started by: dean clarke 2 in: I/C Engines
- 13
- 71
- 24 July 2026 at 10:27
  KEITH BEAUMONT
- Long awaited FreeCAD version 1.1 released
  Started by: Russell Eberhardt in: CAD – Technical drawing & design
- 3
- 8
- 24 July 2026 at 10:16
  Roger Woollett
- Nut screws washer and bolts – you know the old joke
  Started by: Kiwi Bloke in: General Questions
- 16
- 22
- 24 July 2026 at 08:55
  Gerard O’Toole
- The Latest INDEX to Model Engineer & Workshop (Also past issues of MEW) 1 2 3
  Started by: David Frith in: Model Engineer & Workshop
- 7
- 53
- 24 July 2026 at 08:18
  David Frith
- Chat GPTgoes rogue and launches cyber attack
  Started by: Robert Atkinson 2 in: The Tea Room
- 8
- 9
- 24 July 2026 at 07:29
  Adrian R2
- Workshop Heaven but must have cost a fortune.
  Started by: alan ord 2 in: Workshop Tools and Tooling
- 5
- 5
- 24 July 2026 at 02:19
  Bill Phinn
- What Did You Do Today 2026 1 2 … 6 7
  Started by: JasonB in: The Tea Room
- 43
- 152
- 23 July 2026 at 21:50
  Nigel Graham 2
- Mitutoyo Metrology Handbook – Still Available From Mitutoyo UK
  Started by: southernchap in: Books
- 3
- 6
- 23 July 2026 at 21:46
  Robert Atkinson 2
- It’s A Compressor, Jim, But Not… 1 2
  Started by: Nigel Graham 2 in: General Questions
- 12
- 30
- 23 July 2026 at 21:17
  Nigel Graham 2
- Dart 7 1/4 Build
  Started by: Roy Birch in: Locomotives
- 1
- 1
- 23 July 2026 at 14:25
  Roy Birch
- Electronics EL714-C DRO Display
  Started by: houstonceng in: Workshop Tools and Tooling
- 2
- 3
- 23 July 2026 at 13:16
  houstonceng
- Mechanical lubrication steam locos. Non return valve opening pressure
  Started by: peter allen 1 in: General Questions
- 7
- 14
- 23 July 2026 at 10:28
  noel shelley
- BlueBerries
  Started by: Michael Gilligan in: The Tea Room
- 13
- 22
- 23 July 2026 at 02:10
  Grindstone Cowboy
- Bridgeport Series 1 CNC 1 2 3 4
  Started by: tomcnc in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 12
- 76
- 23 July 2026 at 00:47
  seemack
- Help needed: Custom turned steering rack plug (Derbyshire / DE4)
  Started by: darikde4 in: General Questions
- 3
- 3
- 22 July 2026 at 23:03
  paulmichael1084
- Hi folks – the answer to everything is 42
  Started by: hughgee42 in: Introduce Yourself – New members start here!
- 2
- 2
- 22 July 2026 at 16:59
  jaCK Hobson
- Face Drive Pins
  Started by: Michael Gilligan in: Materials
- 5
- 7
- 22 July 2026 at 14:24
  bernard towers
- Unusual Crawford Collets and where to test them
  Started by: Rainbows in: Workshop Tools and Tooling
- 1
- 1
- 22 July 2026 at 13:32
  Rainbows

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

August 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies