SINO SDS6-2V linear correction

[ianjParticipant @ians]

[ianjParticipant @ians]

Hi.

I have just fitted a Sino SDS6-2V DRO to the X axis ( cross slide) on my ML7RB, I'm trying to fine tune the linear travel. I can enter the linear correction setup but how do you enter either +ve or -Ve before the digits ie. + 0.03mm or –0.03mm.

Ian

[JasonBModerator @jasonb]

If it is anything like entering other readings then enter the number and the +- AFTER the number then enter

So you would type 0.03 then + or – then enter but you don't need to enter a + just – if needed using the button with +/- on it

Edited By JasonB on 17/07/2017 07:32:35

[ianjParticipant @ians]

Thanks for that Jason. You are correct , enter the digits then toggle +/- button if it needs to be -Ve. Easy once you know

Thanks again.

Ian

[Author]

Posts