Singe Phase motors

[BernieNUFCParticipant @bernienufc]

I was just reading the thread about the myford lathe motor and got to thinking if i can help someone then maybe i can offer it here.

I dont know much about motors other than i do throw a few away regular, they are only single phase and they vary at 3/4 to 1 to 2 hp. I used one to create a drum sander and a local friend did the same with great success.

They are off of paint shakers when the mechanics expire.

If anyone has a need just drop me a pm and i will put down the names in order (assuming anyone wants one) and let them know in order when i have something.

charge would be for carriage which is usually about £6-7 and maybe a couple of quid for our tea fund say round off at a tenner all in.

I might be able to put more details down if there is interest

Bernie

Edited By BernieNUFC on 24/07/2017 21:16:45

[BernieNUFCParticipant @bernienufc]

[Ian Skeldon 2Participant @ianskeldon2]

Wow Bernie that's a very generous offer, personally, I don't need a motor (well not yet anyway) but appreciate the kindness of your offer and wanted to acknowledge your generosity.

Best wishes, Ian

[websnailParticipant @websnail]

PM sent Bernie

[BernieNUFCParticipant @bernienufc]

Thanks Ian, its nice to offer some help if i can as my tech knowledge is not good enough

PM's acknowledged

[Ady1Participant @ady1]

Sounds like a great idea, depends of course on the motor specs

(You'll either get 0 offers or 100 methinks)

[BernieNUFCParticipant @bernienufc]

I hope its not 100's

A bit of general info of the range, as I have one that is actually going to be used for a change

.37kw .5hp 220v 2.8a 1400 rpm

that's as good as it gets i'm afraid

[Neil WyattModerator @neilwyatt]

Nice one Bernie

Neil

[Author]

Posts