Oilite Bearing with through oil hole

[Ian S CParticipant @iansc]

If you casting has an oil hole, don't drill an oilite bush, the oil put in the hole will soak through the bush (it's like a sponge).

Ian S C

[Howard LewisParticipant @howardlewis46836]

If the motor shaft is worn, why not do a J S?

Turn down the shaft, turn up a bush (Oversize OD), press on bush, (or Loctite) and turn O D to original size.

As he would say "Job's a good 'un"

Howard

[Author]

Posts