New member

New member

This topic has 4 replies, 4 voices, and was last updated 13 March 2017 at 21:28 by Neil Wyatt.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
13 March 2017 at 13:52 #40046
Andy Christie
Participant
@andychristie41724
Advert

13 March 2017 at 13:52 #288630
Andy Christie
Participant
@andychristie41724
Hi all,

Main interest are full size steam, was the youngest main line steam fireman when I was 20, but have been very slowly building 7 1/4 black 5 and a 14xx hoping to have 14 finished back end of next year.

Cheers,

Andy C
13 March 2017 at 15:21 #288645
Brian H
Participant
@brianh50089
Welcome Andy, lots to interest you here, and lots of help.
13 March 2017 at 15:31 #288646
Chris Evans 6
Participant
@chrisevans6
Welcome along Andy, lots of knowledge on here.
13 March 2017 at 21:28 #288709
Neil Wyatt
Moderator
@neilwyatt
Hello Andy,

Welcome to the forum!

How long ago was it that you were a fresh-faced young fireman?

Neil
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Making curved parts
  Started by: Steve Huckins in: Beginners questions
- 3
- 5
- 14 September 2026 at 06:50
  JasonB
- Drive coil ampere turns for seconds pendulum
  Started by: carlw in: Clocks and Scientific Instruments
- 3
- 7
- 14 September 2026 at 03:24
  carlw
- Quorn Belt Guard
  Started by: John Purdy in: 3D Printers and 3D Printing
- 4
- 4
- 13 September 2026 at 23:29
  noel shelley
- Denford Viceory TDS 1/1 GBL lathe
  Started by: sean logie in: General Questions
- 4
- 5
- 13 September 2026 at 22:09
  Bazyle
- What Did You Do Today 2026 1 2 … 7 8
  Started by: JasonB in: The Tea Room
- 47
- 180
- 13 September 2026 at 18:19
  JasonB
- LG Smart TVs
  Started by: Michael Gilligan in: The Tea Room
- 11
- 14
- 13 September 2026 at 18:12
  Michael Gilligan
- Source of milling cutters post Arceurotradw
  Started by: Mike Crossfield in: Workshop Tools and Tooling
- 9
- 11
- 13 September 2026 at 13:55
  jimmy b
- Have I got 12-28 UNF wrong or has Völkel?
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 5
- 8
- 13 September 2026 at 13:46
  Bill Phinn
- Seig sx2p mill
  Started by: BOB BLACKSHAW 1 in: Manual machine tools
- 3
- 8
- 13 September 2026 at 13:12
  Ches Green UK
- Octopus Heat Pump 1 2
  Started by: Michael Gilligan in: The Tea Room
- 17
- 44
- 13 September 2026 at 13:07
  Martin Johnson 1
- Wilson Slant Bed Lathe
  Started by: JC54 in: Manual machine tools
- 7
- 16
- 13 September 2026 at 11:44
  odubhain82
- Question about GHT’s retracting topslide drawing 1 2
  Started by: ega in: Workshop Tools and Tooling
- 9
- 27
- 13 September 2026 at 10:49
  Alan Jackson
- Steam Traction World in administration
  Started by: Baldric in: The Tea Room
- 13
- 21
- 12 September 2026 at 21:28
  Nigel Graham 2
- Model Engineer & Workshop 1 2
  Started by: Tony Watson 3 in: Model Engineer & Workshop
- 18
- 30
- 12 September 2026 at 20:44
  duncan webster 1
- Oilstones / Waterstones
  Started by: Grindstone Cowboy in: General Questions
- 7
- 14
- 12 September 2026 at 16:57
  Grindstone Cowboy
- Parting off 1 2 3
  Started by: Peter Simpson 3 in: Beginners questions
- 22
- 51
- 12 September 2026 at 16:49
  Mick B1
- My week this week! My workshop videos 1 2 … 13 14
  Started by: Phil Whitley in: The Tea Room
- 16
- 331
- 12 September 2026 at 15:17
  Phil Whitley
- End mill sharpening
  Started by: petro1head in: General Questions
- 13
- 21
- 12 September 2026 at 13:02
  Martin Johnson 1
- Inappropriate adverts on the site
  Started by: Joseph Noci 1 in: Website Questions, Comments, and Suggestions
- 16
- 23
- 12 September 2026 at 12:28
  bernard towers
- How much !?! 1 2
  Started by: Michael Gilligan in: Workshop Tools and Tooling
- 17
- 29
- 12 September 2026 at 08:36
  bernard towers
- Collet Identification Please?
  Started by: Nigel Graham 2 in: Manual machine tools
- 5
- 8
- 11 September 2026 at 21:29
  Michael Gilligan
- Preview of whats coming in Freecad 26.3
  Started by: Russell Eberhardt in: CAD – Technical drawing & design
- 2
- 6
- 11 September 2026 at 20:13
  Russell Eberhardt
- Claude et al
  Started by: Michael Gilligan in: The Tea Room
- 3
- 3
- 11 September 2026 at 10:46
  Fulmen
- WARNING: Phishing Attempt on MMEE Bookings?
  Started by: Nigel Graham 2 in: Exhibitions, Shows and Club Events
- 2
- 2
- 11 September 2026 at 09:13
  Meridienne Exhibitions 1
- Inserting An Angled Feature (Alibre Atom) 1 2
  Started by: Nigel Graham 2 in: CAD – Technical drawing & design
- 4
- 32
- 10 September 2026 at 11:13
  Nigel Graham 2

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

September 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies