Needs a good home

[Former MemberParticipant @formermember12892]

SHOUT – if of interest

[Former MemberParticipant @formermember12892]

[This posting has been removed]

[Former MemberParticipant @formermember12892]

[This posting has been removed]

[Dave HalfordParticipant @davehalford22513]

Posted by br on 06/02/2022 14:30:57:

The two different trunk thingies bore sizes are interesting ? Does this follow full size practice ?

Thanks

bill

Edited By br on 06/02/2022 14:31:59

Compound

[Nick WelburnParticipant @nickwelburn]

Posted by br on 06/02/2022 14:30:57:

The two different trunk thingies bore sizes are interesting ? Does this follow full size practice ?

Thanks

bill

Edited By br on 06/02/2022 14:31:59

Compound with steam being re-used – aka triple expansion engine. Obviously not a triple expansion in this case.

[Former MemberParticipant @formermember12892]

[This posting has been removed]

[JasonBModerator @jasonb]

Would have been a "cross compound" Southworth's Lincoln range would have been a similar style model

Nice little project for someone, the cylinders could quite easily be carved out of a bit of cast iron bar or fabricated from Bronze, couple of cylinder covers from same CI bar and the few remaining bits for the valves, pistons and rods.

[Former MemberParticipant @formermember12892]

[This posting has been removed]

[JasonBModerator @jasonb]

It's standard Stephenson's reversing gear just like you find on a Stuart but laid on it's side tephenson_link_motion_(Heat_Engines,_1913).jpg”>link

[Former MemberParticipant @formermember12892]

[This posting has been removed]

[JasonBModerator @jasonb]

[Former MemberParticipant @formermember12892]

[This posting has been removed]

[Author]

Posts